iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 8124-11:2019

(Main)

Safety of toys — Part 11: Chemical toys (sets) other than experimental sets

Safety of toys — Part 11: Chemical toys (sets) other than experimental sets

This document specifies requirements and test methods for the substances and materials used in chemical toys (sets) other than experimental sets. These substances and mixtures are: — those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)[1]; — substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the GHS; and — any other chemical substance(s) and mixture(s) delivered with the chemical toy. Additionally, requirements are specified for markings, warnings, safety rules, contents lists, instructions for use and first aid information. This document applies to: — plaster of Paris (gypsum) moulding sets; — oven-hardening plasticised PVC modelling clay sets; — polystyrene granules sets; — embedding sets; — adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents) supplied or recommended in model sets.

Sécurité des jouets — Partie 11: Jouets chimiques (coffrets) autres que les coffrets d'expériences

General Information

Status
Published
Publication Date
02-May-2019
ICS
97.200.50 - Toys
Technical Committee
ISO/TC 181 - Safety of toys
Drafting Committee
ISO/TC 181/WG 9 - Chemical toys
Current Stage
9020 - International Standard under periodical review
Start Date
15-Apr-2024
Completion Date
15-Apr-2024
Ref Project

Buy Standard

ISO 8124-11:2019 - Safety of toysISO 8124-11:2019 - Safety of toys
PreviousNext
Standard
ISO 8124-11:2019 - Safety of toys
English language
67 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8124-11
First edition
2019-05
Safety of toys —
Part 11:
Chemical toys (sets) other than
experimental sets
Sécurité des jouets —
Partie 11: Jouets chimiques (coffrets) autres que les coffrets
d'expériences
Reference number
ISO 8124-11:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 8124-11:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8124-11:2019(E)

Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Plaster of Paris (gypsum) moulding sets . 3
4.1 Marking . 3
4.2 First aid information . 3
4.3 Safety rules . 3
5 Oven-hardening plasticised PVC modelling clay sets . 3
5.1 Chemical substances . 3
5.2 Marking . 4
5.3 First aid information . 4
5.4 Safety rules . 4
6 Moulding sets . 5
6.1 Polystyrene granules sets . 5
6.1.1 Chemical substances. 5
6.1.2 Marking . 5
6.1.3 First aid information .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 8124-12:2023(Main)
Safety of toys — Part 12: Microbiological safety

This document specifies acceptable criteria for microbiological cleanliness and adequacy of preservation of the specified toy materials. The requirements in this document apply to all toys that are, contain or are supplied with aqueous materials (e.g. paste, putty, liquid or gel). In addition, this document applies to toys that are or include a cosmetic (including those intended for use on a toy as well as on the child). Powders and similar substances intended to be mixed with water are also within the scope of this document. The cleanliness and preservation effectiveness requirements are applicable to a toy as it is initially received by the consumer in an unopened and undamaged container and do not apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse, unless specifically noted otherwise. The microbial limits and test methods contained in this document are inappropriate to apply to products that are consumer complaint returns, as there is no way to establish what conditions the toys have been subject to before being returned. The following are excluded from the scope of this document: — materials that are inaccessible during normal use or reasonably foreseeable abuse; — powder or powder-like materials intended to show biological phenomena, e.g. shrimp eggs, seeds, soil; — food.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 8124-6:2023(Main)
Safety of toys — Part 6: Certain phthalate esters

This document specifies a method standard for the determination of di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl-butyl phthalate (BBP), bis-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-iso-nonyl phthalate (DINP) and di-iso-decyl phthalate (DIDP) in toys. It can also be applied to other phthalate esters (see G.2) if adequate validation is demonstrated. This document applies to toys made of plastics, textiles, coatings and liquids. This document has been validated for polyvinylchloride (PVC) and polyurethane (PU) plastics and some representative paint coatings (see Annex B). This document can also be applied to other product categories.

  • Standard
    40 pages
    English language
    sale 15% off
ISO
ISO 8124-2:2023(Main)
Safety of toys — Part 2: Flammability

This document specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition. The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition. This document includes general requirements relating to all toys and specific requirements and test methods relating to the following toys, which are considered as being those presenting the greatest hazard: — toys intended to be worn on the head, such as beards, moustaches and wigs made from pile or flowing elements, masks, hoods and headdresses; however, paper and paperboard hats without embellishments or attachments are excluded; — toy disguise costumes and toys intended to be worn by a child in play; — toys intended to be entered by a child and constructed from textiles and/or polymer sheets and films; — soft-filled toys (see A.6).

  • Standard
    29 pages
    English language
    sale 15% off
ISO
ISO 8124-10:2023(Main)
Safety of toys — Part 10: Experimental sets for chemistry and related activities

This document specifies requirements for the maximum amount and, in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities. These substances and mixtures are: — those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS);[3] — substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the GHS; — any other chemical substance(s) and mixture(s) delivered with the experimental set. This document applies to experimental sets for chemistry and related activities, including chemistry sets, crystal-growing sets, carbon-dioxide-generating experimental sets and supplementary sets. This document also specifies requirements for marking, a contents list, instructions for use, eye protection and the equipment intended for carrying out the experiments. This document does not apply to combined sets, for example a combination of a chemistry set and a crystal-growing set. Requirements for certain other chemical toys are given in ISO 8124-11. See Clause A.1.

  • Standard
    25 pages
    English language
    sale 15% off
ISO
ISO 8124-3:2020/Amd 1:2023(Amendment)
Safety of toys — Part 3: Migration of certain elements — Amendment 1: Limits for boron and other elements in slime, and barium in modelling clay
  • Standard
    3 pages
    English language
    sale 15% off
ISO
ISO 8124-1:2022(Main)
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties

The requirements in this document apply to all toys, i.e. any product designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise. The requirements of this document specify acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing (e.g. rattles, small parts, sharp points and edges, and hinge-line clearances) as well as acceptable criteria for properties peculiar to certain categories of toy (e.g. maximum kinetic energy values for non-resilient-tipped projectiles and minimum tip angles for certain ride-on toys). This document specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. The requirements vary according to the age group for which a particular toy is intended. The requirements for a particular age group reflect the nature of the hazards and the expected mental and/or physical abilities of a child to cope with them. This document also requires that appropriate warnings and/or instructions for use be given on certain toys or their packaging. Due to linguistic problems which may occur in different countries, the wording of these warnings and instructions is not specified but given as general information in Annex B. It should be noted that different legal requirements exist in many countries with regard to such marking. This document does not purport to cover or include every conceivable potential hazard of a particular toy or toy category. Except for labelling requirements indicating the functional hazards and the age range for which the toy is intended, this document has no requirements for those characteristics of toys which represent an inherent and recognized hazard which is integral to the function of the toy. EXAMPLE 1 An example of such a hazard is the sharp point necessary for the proper function of a needle. The needle is a hazard which is well understood by the purchaser of a toy sewing kit, and the functional sharp-point hazard is communicated to the user as part of the normal educational process of learning to sew as well as at the point of purchase by means of cautionary labelling on the product's packaging. EXAMPLE 2 As a further example, a two-wheeled toy scooter has inherent and recognized hazards associated with its use (e.g. instability during use, especially while learning). The potential hazards associated with its structural characteristics (e.g. sharp edges, pinch hazards) will be minimized by conformity to the requirements of this document. Products not included within the scope of this document are: a) bicycles, except for those considered to be toys, i.e. those having a maximum saddle height of 435 mm (see 1); b) slingshots; NOTE 1 “Slingshots” are also known as “catapults” and are usually held in the hand; examples are given in Figure 1. Toy versions of medieval catapults and trebuchets are not exempt from this document; an example is given in Figure 2. c) darts with metal points; d) public playground equipment; e) compressed air- and gas-operated guns and pistols (see 1); f) kites (except for the electric resistance of their strings, which is included); g) model kits, hobby and craft items, in which the finished item is not primarily of play value; h) sporting goods and equipment, camping goods, athletic equipment, musical instruments and furniture; however, toys which are their counterparts are included; NOTE 2 It is recognized that there is often a fine distinction between, for example, a musical instrument or a sporting item and its toy counterpart. The intention of the manufacturer or distributor, as well as normal use and reasonably foreseeable abuse, determines whether the item is a toy counterpart or not. i) models of aircraft

  • Standard
    151 pages
    English language
    sale 15% off
ISO
ISO 8124-7:2015/Amd 1:2020(Amendment)
Safety of toys — Part 7: Requirements and test methods for finger paints — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO/TR 8124-9:2020(Main)
Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1 and ASTM F963

This document consists of a comparison of the mechanical and physical requirements covered by the following toy safety standards: a) ISO: ISO 8124‑1:2018; b) Europe (CEN): EN 71‑1:2014+A1:2018; c) USA: ASTM F963:2017.

  • Technical report
    124 pages
    English language
    sale 15% off
ISO
ISO 8124-3:2020(Main)
Safety of toys — Part 3: Migration of certain elements

1.1 This document specifies maximum acceptable levels and methods of sampling, extraction and determination for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys. 1.2 Maximum acceptable levels are specified for the migration of the elements listed in 1.1 from the following toy materials: — coatings of paints, varnishes, lacquers, printing inks, polymers and similar coatings (see 9.1); — polymeric and similar material, including laminates, whether textile-reinforced or not, but excluding other textiles and non-woven textiles (see 9.2); — paper and paperboard (see 9.3); — natural, artificial or synthetic textiles (see 9.4); — glass/ceramic/metallic materials, excepting lead solder when used for electrical connections (see 9.5); — other materials, whether mass-coloured or not (e.g. wood, fibreboard, hardboard, bone and leather) (see 9.6); — materials intended to leave a trace (e.g. the graphite materials in pencils and liquid ink in pens) (see 9.7); — pliable modelling materials, including modelling clays and gels (see 9.8); — paints to be used as such in the toy, including finger paints, varnishes, lacquers, glazing powders and similar material in solid or liquid form (see 9.9). 1.3 The requirements in this document apply to the following toys and toy components of toys and toy materials (see D.2.1): — all intended food and oral contact toys, cosmetic toys and writing instruments categorized as toys, irrespective of any age grading or recommended age labelling; — all toys intended for or suitable for children under 72 months of age; — accessible coatings, irrespective of any age grading or recommended age labelling; — accessible liquids, pastes and gels (e.g. liquid paints, modelling compounds), irrespective of any age grading or recommended age labelling. 1.4 Packaging materials are not included, unless they are intended to be kept, for example boxes and containers, or unless they form part of the toy or have intended play value (see D.2.2). NOTE No requirements are given for toys and parts of toys which, due to their accessibility, function, mass, size or other characteristics, are obviously unlikely to be sucked, licked or swallowed, bearing in mind the normal and foreseeable behaviour of children (e.g. the coating on the crossbeam of a swing set, the tyres of a toy bicycle).

  • Standard
    29 pages
    English language
    sale 15% off
ISO
ISO 8124-4:2014/Amd 2:2019(Amendment)
Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 2
  • Standard
    3 pages
    English language
    sale 15% off