PPE ensembles for firefighters undertaking specific rescue activities — Part 6: Footwear

ISO 18639-6:2018 provides the principles that govern the development of incident type and/or hazard specific test methods and minimum performance requirements for safety footwear for firefighters while engaged in specific rescue activities. Footwear related to specific rescue activities, e.g. Road Traffic Crash, (RTC) and Urban Search and Rescue, (USAR) is documented in individual subclauses of this document. NOTE For further guidance refer ISO 18639‑1. The purpose of ISO 18639-6:2018 is to ensure minimum performance requirements for incident type and/or hazard specific safety footwear are designated. ISO 18639-6:2018 covers general footwear design, the minimum performance level of the materials used and the methods of test for determining this performance level. ISO 18639-6:2018 does not cover special footwear for use in other high risk situations such as structural firefighting. ISO 18639-6:2018 does not cover protection for the head, torso, arms, hands and legs or protection of the feet against other hazards, e.g. chemical, biological, radiation and electrical hazards, except for limited, accidental exposure to fire ground chemicals and contaminated blood or body fluids. Selection of the appropriate system of Personal Protective Equipment, (PPE), including footwear, is dependent on carrying out an effective risk assessment which identifies the hazard to be faced, evaluates the likelihood of those hazards and provides the means of reducing or eliminating these hazards.

Équipements de protection personnelle pour pompiers entreprenant des activités de sauvetage particulières — Partie 6: Chaussures

General Information

Status
Published
Publication Date
04-Jan-2018
Current Stage
9093 - International Standard confirmed
Completion Date
29-Feb-2024
Ref Project

Buy Standard

Standard
ISO 18639-6:2018 - PPE ensembles for firefighters undertaking specific rescue activities
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18639-6
First edition
2018-01
PPE ensembles for firefighters
undertaking specific rescue
activities —
Part 6:
Footwear
Équipements de protection personnelle pour pompiers entreprenant
des activités de sauvetage particulières —
Partie 6: Chaussures
Reference number
ISO 18639-6:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 18639-6:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18639-6:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification and designs . 2
5 Sampling and conditioning . 4
5.1 Sampling . 4
5.2 Conditioning . 4
6 Performance requirements . 4
6.1 General . 4
6.2 Summary of requirements and classification of specific rescue activities . 4
6.3 Thermal requirements . 6
6.3.1 Insulation against heat . 6
6.3.2 Flame resistance . 7
6.4 Mechanical protection requirements . 8
6.4.1 Cut resistance by a hand-held chainsaw . 8
6.4.2 Metatarsal Protection . 8
6.4.3 Ankle Protection . 8
6.5 Environmental protection requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.