Acoustics — Screens, furniture and single objects intended for interior use — Rating of sound absorption and sound reduction of elements based on laboratory measurements

This document specifies how screens, furniture and single objects intended for interior use are assessed with regard to sound absorption and specifies the evaluation of sound attenuation for floor screens. It also specifies under which circumstances various interior products for offices, schools and other public spaces are considered as plane absorbers or as discrete single objects. A product considered as a single object and intended for interior use is measured according to ISO 354 and evaluated by its equivalent sound absorption area or object sound absorption coefficient in octave bands. This document defines interior products and single objects and it comprises additional information regarding measurements and assessment of single objects. The sound absorption as specified in this document can be used to calculate: a) reverberation time characteristics in rooms; b) room acoustic parameters using ray tracing software.

Acoustique — Meubles, écrans et objets uniques destinés à usage intérieur — Note de l'absorption acoustique et de réduction acoustique des éléments basée sur des mesures en laboratoire

General Information

Status
Published
Publication Date
20-Nov-2018
Current Stage
9060 - Close of review
Start Date
04-Jun-2029
Ref Project

Buy Standard

Standard
ISO 20189:2018 - Acoustics -- Screens, furniture and single objects intended for interior use -- Rating of sound absorption and sound reduction of elements based on laboratory measurements
English language
28 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 20189
First edition
2018-11
Acoustics — Screens, furniture and
single objects intended for interior
use — Rating of sound absorption and
sound reduction of elements based on
laboratory measurements
Acoustique — Meubles, écrans et objets uniques destinés à usage
intérieur — Note de l'absorption acoustique et de réduction
acoustique des éléments basée sur des mesures en laboratoire
Reference number
ISO 20189:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 20189:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 20189:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Methods to measure and evaluate various interior acoustic products .3
4.1 Single objects . 3
4.1.1 General. 3
4.1.2 Single object sound absorption . 3
4.2 Desk screens . 4
4.3 Floor screens. 4
4.3.1 General. 4
4.3.2 Floor screen sound absorption . 4
4.3.3 Floor screen sound attenuation . 4
4.3.4 Floor screen sound insulation . 4
4.4 Furniture ensembles . 5
4.4.1 General. 5
4.4.2 Furniture ensembles sound absorption . 5
2 5
4.5 Single objects that are tightly connected to form a surface greater than or equal to 10 m
4.6 Other single objects .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.