Metallic and other inorganic coatings — Requirements for the designation of metallic and inorganic coatings

ISO 27830:2017 specifies the technical requirements of metallic and other inorganic coatings in order to develop consistent technical standards and establishes a standard format for designating the coatings. It applies to International Standards for electrodeposited, autocatalytic and vapour-deposited coatings. Detailed technical requirements for individual coatings are not given in this document, but can be found in the International Standards listed in the Bibliography. ISO 27830:2017 does not apply to thermally sprayed and porcelain enamel coatings.

Revêtements métalliques et autres revêtements inorganiques — Exigences pour la désignation des revêtements métalliques et autres revêtements inorganiques

ISO 27830:2017 spécifie les exigences techniques relatives aux revêtements métalliques et autres revêtements inorganiques afin d'élaborer des normes techniques cohérentes, et établit un format normalisé pour désigner les revêtements. Il s'applique aux Normes internationales relatives aux dépôts par voie électrolytique, autocatalytique et en phase vapeur. Les exigences techniques détaillées s'appliquant à des revêtements spécifiques ne sont pas fournies dans le présent document, mais elles peuvent être trouvées dans les Normes internationales citées dans la Bibliographie. ISO 27830:2017 ne s'applique pas aux revêtements déposés par projection thermique ou par émaillage.

General Information

Status
Published
Publication Date
20-Nov-2017
Current Stage
9093 - International Standard confirmed
Completion Date
04-Oct-2023
Ref Project

Relations

Buy Standard

Standard
ISO 27830:2017 - Metallic and other inorganic coatings -- Requirements for the designation of metallic and inorganic coatings
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 27830:2017 - Revetements métalliques et autres revetements inorganiques -- Exigences pour la désignation des revetements métalliques et autres revetements inorganiques
French language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 27830
Second edition
2017-11
Metallic and other inorganic
coatings — Requirements for the
designation of metallic and inorganic
coatings
Revêtements métalliques et autres revêtements inorganiques —
Exigences pour la désignation des revêtements métalliques et autres
revêtements inorganiques
Reference number
ISO 27830:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 27830:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 27830:2017(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Information to be supplied to the electroplater (or processor) by the purchaser .1
4.1 Essential information . 1
4.2 Additional information . 2
5 Designation . 2
5.1 General . 2
5.1.1 Designation specification . 2
5.1.2 Description and International Standard number modules . 3
5.1.3 Individual item module . 3
5.2 Designation of the basis material. 3
5.3 Designation of heat treatment requirements . 4
5.4 Designation of the type and thickness of the coatings . 4
6 Sampling . 4
Annex A (normative) Symbols for designating metallic and other inorganic coatings .5
Annex B (informative) Examples of designations . 8
Annex C (informative) Service condition numbers and severity .10
Bibliography .11
© ISO 2017 – All rights reserved iii

---------------------- Page: 3 ----------
...

NORME ISO
INTERNATIONALE 27830
Deuxième édition
2017-11
Revêtements métalliques et autres
revêtements inorganiques —
Exigences pour la désignation des
revêtements métalliques et autres
revêtements inorganiques
Metallic and other inorganic coatings — Requirements for the
designation of metallic and inorganic coatings
Numéro de référence
ISO 27830:2017(F)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 27830:2017(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2017, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 27830:2017(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Informations à fournir par l’acheteur à l’électroplaste (ou au spécialiste du revêtement) .2
4.1 Informations essentielles . 2
4.2 Informations complémentaires . 2
5 Désignation . 2
5.1 Généralités . 2
5.1.1 Spécification de désignation . 2
5.1.2 Modules «description» et «numéro de Norme internationale» . 3
5.1.3 Module «produit» . 3
5.2 Désignation du matériau de base. 4
5.3 Désignation des exigences relatives au traitement thermique . 4
5.4 Désignation du type et de l’épaisseur du revêtement . 4
6 Échantillonnage . 5
Annexe A (normative) Symboles de désignation des revêtements métalliques et
autres revêtements inorganiques . 6
Annexe B (informative) Exemples de désignations . 9
Annexe C (informative) Numéros des conditions d’utilisation et sévérité .11
Bibliographie .12
© ISO 2017
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.