Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number

ISO 14900:2017 specifies two methods for the measurement of the hydroxyl number of polyols used as polyurethane raw materials. It is necessary to know the hydroxyl content of polyols to properly formulate polyurethane systems. Method A is primarily applicable to readily esterified polyether polyols. It is also intended for polyols which have significant steric hindrance, such as those based on sugars. Method B is intended for polyether polyols, polymer polyols and amine-initiated polyols, but may give low results for sterically hindered polyols. Other polyols can be analysed by these methods if precautions are taken to verify applicability. These methods can be used for research and for quality control and specification purposes.

Plastiques — Polyols pour la production du polyuréthanne — Détermination de l'indice d'hydroxyle

General Information

Status
Withdrawn
Publication Date
01-Mar-2017
Current Stage
9599 - Withdrawal of International Standard
Completion Date
12-Dec-2023
Ref Project

Relations

Buy Standard

Standard
ISO 14900:2017 - Plastics -- Polyols for use in the production of polyurethane -- Determination of hydroxyl number
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14900
Second edition
2017-03
Plastics — Polyols for use in the
production of polyurethane —
Determination of hydroxyl number
Plastiques — Polyols pour la production du polyuréthanne —
Détermination de l’indice d’hydroxyle
Reference number
ISO 14900:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 14900:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14900:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Interferences . 2
6 Reagents . 2
7 Apparatus . 4
8 Method A — Acetylation . 5
8.1 Procedure . 5
8.2 Expression of results . 7
8.3 Precision and bias . 7
8.4 Test report . 8
9 Method B — Phthalation . 8
9.1 Procedure . 8
9.2 Expression of results . 9
9.3 Precision and bias .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.