ISO 21622-3:2024
(Main)Irrigation techniques — Remote monitoring and control for irrigation — Part 3: Interoperability
Irrigation techniques — Remote monitoring and control for irrigation — Part 3: Interoperability
This document establishes requirements for interoperability among systems developed for management and/or control of irrigation facilities. It can be applied under any technological platform and irrigation system, regardless of the water management scheme, with the exception of irrigation mobile machinery, including centre pivots and linear irrigation machines. Due to the dynamic nature of these machines, associated control systems and specific safety requirements, the applicability of exchangeable data for irrigation mechanical move systems was not fully determined at the time of this publication. This document does not define hardware or software requirements for any of the systems to which it applies. It only concerns externally visible interfaces and places no restriction on the underlying implementations. It has been designed to avoid interference with proprietary solutions subjected to intellectual property. From the point of view of the data exchange, and to guarantee interoperability based on the previous premises, this document defines three communication interfaces (interface with management, interface with events and interface with subsystems) and the architecture to which these interfaces apply. Three levels of architecture has been defined to accommodate these interfaces: — The Management Level, where any MIS conforming with this document is located. Out of all available data exchange methods, each MIS only implements those required to execute its functionalities. — The Higher Control Level: coordination. At this level is performed the data integration among RMCS and the access control to it. A software element, called coordination broker, ensures this integration and allows the use of different technologies in its interfaces. — The Lower Control Level: RMCS. These can also be referred to as irrigation subsystems. The RMCS perform the duties of the irrigation entity(s) under its control. A coordination broker can be developed as a product by any of these manufacturers or by an independent developer using the standard specifications for this kind of software.
Titre manque — Partie 3: Titre manque
General Information
Buy Standard
Standards Content (Sample)
International
Standard
ISO 21622-3
First edition
Irrigation techniques — Remote
2024-03
monitoring and control for
irrigation —
Part 3:
Interoperability
Reference number
ISO 21622-3:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 21622-3:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 21622-3:2024(E)
Contents Page
Foreword . vi
Introduction . vi
1 Scope . 1
2 Normative reference . 1
3 Terms and definitions . 2
4 Interoperability I: System architecture . 4
4.1 Levels and components of an interoperable architecture . 4
4.2 Interface specifications . 6
5 Interoperability II: exchange of data from irrigation entities . 20
5.1 General outline . 20
5.2 Static data of the irrigation entities . 20
5.3 Structure of an irrigation entity identifier (EntityID) . 28
5.4 Properties . 28
5.5 Entity events . 35
6 Interoperability III: Exchange of data from procedural elements performed in
irrigation entities . 37
6.1 General outline . 37
6.2 Statuses and actions . 37
6.3 Types of Operation recipes . 37
6.4 Types of Unit Procedure recipes . 56
6.5 Types of Procedure recipes . 58
6.6 Report . 59
6.7 Procedural element events . 62
Annex A (normative) Management interface with SOAP 1.2 . 64
A.1 Overview . 64
A.2 Requirements .
...
DRAFT INTERNATIONAL STANDARD
ISO/DIS 21622-3
ISO/TC 23/SC 18 Secretariat: SII
Voting begins on: Voting terminates on:
2022-04-15 2022-07-08
Irrigation techniques — Remote monitoring and control
for irrigation —
Part 3:
Interoperability
Techniques d’irrigation — Surveillance et commande à distance pour l’irrigation —
Partie 3: Interoperability
ICS: 65.060.35
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 21622-3:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 1 ----------------------
ISO/DIS 21622-3:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/DIS 21622-3:2022(E)
Contents Page
Foreword . v
Introduction . v
1 Scope .1
2 Normative reference .2
3 Terms and definitions .2
4 Interoperability I: system architecture .4
4.1 Levels and components of an interoperable architecture .4
4.2 Interface specifications .6
5 Interoperability II: exchange of data from irrigation entities . 19
5.1 General outline . 19
5.2 Static data of the irrigation entities . 20
5.3 Structure of an irrigation entity ID (EntityID) . 28
5.4 Properties . 28
5.5 Entity events . 38
6 Interoperability III: exchange of data from procedural elements performed in
irrigation entities. 39
6.1 General outline . 39
6.2 Statuses and actions . 40
6.3 Types of Operation recipes . 40
6.4 Types of Unit Procedure recipes
...
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 21622-3
ISO/TC 23/SC 18
Irrigation techniques — Remote
Secretariat: SII
monitoring and control for
Voting begins on:
2023-07-12 irrigation —
Voting terminates on:
Part 3:
2023-09-06
Interoperability
Techniques d’irrigation — Surveillance et commande à distance pour
l’irrigation —
Partie 3: Interoperability
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 21622-3:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/FDIS 21622-3:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 21622-3
ISO/TC 23/SC 18
Irrigation techniques — Remote
Secretariat: SII
monitoring and control for
Voting begins on:
irrigation —
Voting terminates on:
Part 3:
Interoperability
Techniques d’irrigation — Surveillance et commande à distance pour
l’irrigation —
Partie 3: Interoperability
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 21622-3:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/FDIS 21622-3:2023(E)
Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative reference . 1
3 Terms and definitions . 2
4 Interoperability I: System architecture . 4
4.1 Levels and components of an interoperable architecture . 4
4.2 Interface specifications . 5
5 Interoperability II: exchange of data from irrigation entities . 19
5.1 General outline . 19
5.2 Static data of the irrigation entities . 20
5.3 Structure of an irrigation entity identifier (EntityID) . 27
5.4 Properties . 28
5.5 Entity events . 35
6 Interoperability III: Exchange of data from procedural elements performed in
irrigation entities .
...
ISO/TC 23/SC 18
Date: 2022-01-07
ISO/DIS 21622-3:2022(E)
ISO/TC 23/SC 18/WG
Date: 2023-06-28
ISO/FDIS 21622-3:2023(E)
TC /SC
Secretariat: Formatted: Font color: Text 1, French (Switzerland)
Formatted: Font color: Text 1
Formatted: Font color: Text 1, French (Switzerland)
Formatted: Font color: Text 1
Irrigation techniques — Remote monitoring and control for irrigation
Formatted: Font color: Text 1
— Part 3: Interoperability
Formatted: Font color: Text 1
Formatted: Font color: Text 1
Warning
This document is not an ISO International Standard. It is distributed for review and comment. It is
subject to change without notice and may not be referred to as an International Standard.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent
rights of which they are aware and to provide supporting documentation.
---------------------- Page: 1 ----------------------
© ISO 2022 – All rights reserved
Document type:
Document subtype:
Document stage:
Document language:
---------------------- Page: 2 ----------------------
ISO/FDIS 21622-3:2023(E)
Formatted: Left: 1.5 cm, Bottom: 0.5 cm, Footer distance
from edge: 0 cm
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of
Formatted
...
this publication may be reproduced or utilized otherwise in any form or by any means, electronic or
mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO at the address below or ISO’sISO's member body
in the country of the requester.
ISO copyright officeCopyright Office
Formatted: Font: 10 pt, Font color: Black, English (United
States)
Ch. de Blandonnet 8 • CP 401
• CH-1214 Vernier, Geneva, Switzerland Formatted: Indent: First line: 0 cm
Tel. Phone: + 41 22 749 01 11
Formatted: Font: 10 pt, Font color: Black, English (United
Fax + 41 22 749 09 47
States)
copyright@iso.org
Formatted: Indent: First line: 0 cm
www.iso.org
Formatted: Font: 10 pt, Font color: Black, English (United
States)
Email: copyright@iso.org
Formatted: Font: 10 pt, Font color: Black, English (United
Website: www.iso.org
States)
Published in Switzerland.
ii © ISO 2023 – All rights reserved
---------------------- Page: 3 ----------------------
ISO/FDIS 21622-3:2023(E)
Formatted: Font: 14 pt, Font color: Text 1, Portuguese
Contents Page
(Brazil)
Formatted: Position: Horizontal: Left, Relative to:
Foreword . vii
Column, Vertical: In line, Relative to: Margin, Wrap
Introduction . viii
Formatted: Font color: Text 1, Portuguese (Brazil)
1 Scope . 1 Formatted: Portuguese (Brazil)
2 Normative reference . 1
3 Terms and definitions . 2
4 Interoperability I: System architecture . 4
4.1 Levels and components of an interoperable architecture . 4
4.2 Interface specifications . 6
5 Interoperability II: exchange of data from irrigation entities . 22
5.1 General outline . 22
5.2 Static data of the irrigation entities . 23
5.3 Structure of an irrigation entity identifier (EntityID) . 31
5.4 Properties . 32
5.5 Entity events . 42
6 Interoperability III: exchange of data from procedur
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.