Textile fibres — Determination of linear density — Gravimetric method and vibroscope method

This document specifies a gravimetric method and a vibroscope method for the determination of the linear density of textile fibres applicable respectively to: a) bundles of fibres; b) individual fibres. Useful data can be obtained on man-made fibres and, with less precision, on natural fibres. This document only applies to fibres which can be kept straight and, in the case of bundles, parallel, during test preparation. It is properly applicable when the fibres are readily freed of crimp. The methods in this document are not applicable to tapered fibres. The vibroscope method is not always applicable to hollow and flat (ribbon-like) fibres.

Fibres textiles — Détermination de la masse linéique — Méthode gravimétrique et méthode au vibroscope

Le présent document spécifie une méthode gravimétrique et une méthode au vibroscope pour déterminer la masse linéique des fibres textiles. Ces méthodes s'appliquent respectivement aux: a) faisceaux de fibres; b) fibres individuelles. Des données utiles peuvent être obtenues pour les fibres chimiques, mais elles sont moins fidèles pour les fibres naturelles. Le présent document ne peut être appliqué qu'aux fibres pouvant être maintenues rectilignes (parallèles dans le cas de faisceaux) pendant la préparation des essais. Il s'applique parfaitement lorsque les fibres sont aisément défrisées. Les méthodes mentionnées dans le présent document ne s'appliquent pas aux fibres profilées. La méthode au vibroscope n'est pas toujours applicable aux fibres creuses et plates (comme des rubans).

General Information

Status
Published
Publication Date
25-Jan-2021
Current Stage
6060 - International Standard published
Start Date
26-Jan-2021
Due Date
22-Apr-2021
Completion Date
26-Jan-2021
Ref Project

Relations

Buy Standard

Standard
ISO 1973:2021 - Textile fibres -- Determination of linear density -- Gravimetric method and vibroscope method
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1973:2021 - Fibres textiles -- Détermination de la masse linéique -- Méthode gravimétrique et méthode au vibroscope
French language
10 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/PRF 1973:Version 05-dec-2020 - Textile fibres -- Determination of linear density -- Gravimetric method and vibroscope method
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 1973
Third edition
2021-01
Textile fibres — Determination of
linear density — Gravimetric method
and vibroscope method
Fibres textiles — Détermination de la masse linéique — Méthode
gravimétrique et méthode au vibroscope
Reference number
ISO 1973:2021(E)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 1973:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 1973:2021(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
4.1 General . 2
4.2 Gravimetric method, for bundles of fibres . 2
4.3 Vibroscope method, for individual fibres . 2
5 Apparatus . 2
5.1 Gravimetric method apparatus . 2
5.2 Vibroscope method apparatus . 2
6 Sampling . 3
7 Conditioning and testing atmospheres . 3
8 Procedure. 3
8.1 Gravimetric method . 3
8.2 Vibroscope method . 3
9 Expression of results . 4
9.1 General . 4
9.2 Gravimetric method . 4
9.3 Vibroscope method . 5
10 Test report . 5
Annex A (informative) Examples of calculation of mean linear density . 7
Bibliography .10
© ISO 2021 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 1973:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 23,
Fibres and yarns, in collaboration with the European Committee for Standardization (CEN) Technical
Committee CEN/TC 248, Textiles and textile products, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO1973: 1995), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— ISO 6989 has been added as a normative reference in Clause 2 and 8.2.1;
— a note specifying the tension application has been added in 3.2;
— a correction factor (for measurements on stiff fibres) has been permitted in 4.3, 8.2.1 and 10.3;
— testing equipment without a scale but with a display, respectively connection to a computer system
in 4.3 for linear density reading is permitted;
— reference to 5.2.2 “Forceps” (instead of 5.1.6) has been corrected;
— automatic application of a loading force instead of the use of forceps in 5.2.2 and 8.2.3 is permitted;
— Formulae (A.1) to (A.8) have been corrected;
— grammar and linguistic consistency of definitions in 4.3, 8.1.3, 8.2.2, 9.2.1, A.1 and A.2 have been
reviewed.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 1973:2021(E)

Introduction
The linear density of individual fibres is one of the most important physical characteristics in terms
of processability and predictability of the next-step intermediate product, such as spun-yarns and
nonwovens. Other than testing methods, such as air-permeability on test specimen consisting of mass
of fibres (Micronaire), this document describes two measurement methods to determine the mass per
unit length (= linear density) using either a bundle of 50 fibres, or on individual fibres. While the first
method determines an average value, only, in relatively short time, the second method measures the
individual fibre fineness and therefore the statistical distribution of the laboratory sample, too.
© ISO 2021 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 1973:2021(E)
Textile fibres — Determination of linear density —
Gravimetric method and vibroscope method
1 Scope
This document specifies a gravimetric method and a vibroscope method for the determination of the
linear density of textile fibres applicable respectively to:
a) bundles of fibres;
b) individual fibres.
Useful data can be obtained on man-made fibres and, with less precision, on natural fibres.
This document only applies to fibres which can be kept straight and, in the case of bundles, parallel,
during test preparation. It is properly applicable when the fibres are readily freed of crimp. The methods
in this document are not applicable to tapered fibres.
The vibroscope method is not always applicable to hollow and flat (ribbon-like) fibres.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 139, Textiles — Standard atmospheres for conditioning and testing
ISO 1130, Textile fibres — Some methods of sampling for testing
ISO 6989, Textile fibres — Determination of length and length distribution of staple fibres (by measurement
of single fibres)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
tension
force tending to cause the extension of a body
3.2
tensioning force
force effective on a fibre specimen during the vibroscope test
Note 1 to entry: In textile testing, the tensioning force applied is based on the linear density or cross-sectional area.
© ISO 2021 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO 1973:2021(E)

4 Principle
4.1 General
Two methods for determining linear density are described.
4.2 Gravimetric method, for bundles of fibres
Specimens of a given length are weighed on a balance. This method is applicable to bundles of fibres.
4.3 Vibroscope method, for individual fibres
Individual fibres of a given length and under specified tensioning force are subjected to vibration at
resonance frequency. The linear density is determined from the conditions of the resonance state, i.e.
the resonance frequency, the vibrating length of the fibre and the tensioning force. The linear density is
read directly on the scale or a display of the vibroscope apparatus respectively reported by a connected
computer system. This method assumes that the linear density of the tested length of the fibre is
constant.
Under certain circumstances (e.g. a short vibrating length, a low tensioning force, high-modulus fibres)
the vibroscope method results are falsified by the bending stiffness of the fibre. As a compensating
countermeasure, a correction factor can be applied (refer to 8.2.1), if agreed on by the interested
parties.
5 Apparatus
5.1 Gravimetric method apparatus
5.1.1 Balance, suitable for weighing the bundles of fibres to an accuracy of at least ±1 %.
5.1.2 Device for cutting, the bundles under tension to a length known within an accuracy of ±1 % and
allowing an adjustment of the tension of the bundles to be cut.
For example, two razor blades set parallel in a suitable holder may be used.
5.1.3 Comb sorter, for preliminary alignment of fibres.
5.1.4 Textile
...

NORME ISO
INTERNATIONALE 1973
Troisième édition
2021-01
Fibres textiles — Détermination
de la masse linéique — Méthode
gravimétrique et méthode au
vibroscope
Textile fibres — Determination of linear density — Gravimetric
method and vibroscope method
Numéro de référence
ISO 1973:2021(F)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 1973:2021(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2021
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2021 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 1973:2021(F)

Sommaire Page
Avant-propos .iv
Introduction .vi
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 2
4.1 Généralités . 2
4.2 Méthode gravimétrique, pour faisceaux de fibres . 2
4.3 Méthode au vibroscope, pour fibres individuelles . 2
5 Appareillage . 2
5.1 Appareillage pour la méthode gravimétrique . 2
5.2 Appareillage pour la méthode au vibroscope . 3
6 Échantillonnage . 3
7 Atmosphères de conditionnement et d’essai . 3
8 Mode opératoire. 3
8.1 Méthode gravimétrique . 3
8.2 Méthode au vibroscope . 4
9 Expression des résultats. 5
9.1 Généralités . 5
9.2 Méthode gravimétrique . 5
9.3 Méthode au vibroscope . 5
10 Rapport d’essai . 6
Annexe A (informative) Exemples de calculs de la masse linéique moyenne .7
Bibliographie .10
© ISO 2021 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 1973:2021(F)

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www .iso .org/ avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 38, Textiles, sous-comité SC 23, Fibres
et fils, en collaboration avec le comité technique CEN/TC 248, Textiles et produits textiles, du Comité
européen de normalisation (CEN), conformément à l’Accord de coopération technique entre l’ISO et le
CEN (Accord de Vienne).
Cette troisième édition annule et remplace la deuxième édition (ISO1973: 1995), qui a fait l’objet d’une
révision technique.
Les principales modifications par rapport à l’édition précédente sont les suivantes:
— ajout de l’ISO 6989 en tant que référence normative dans l’Article 2 et en 8.2.1;
— ajout d’une note spécifiant l’application de la tension en 3.2;
— autorisation d’un facteur de correction (pour les mesures effectuées sur des fibres rigides) en 4.3,
8.2.1 et 10.3;
— autorisation d’utilisation d’un équipement d’essai sans échelle, mais disposant d’un affichage ou
d’une connexion à un ordinateur, en 4.3 pour les résultats relatifs à la masse linéique;
— correction de la référence 5.2.2 «Pinces ou brucelles» (au lieu de 5.1.6);
— autorisation d’application automatique d’une force de charge au lieu de l’utilisation de pinces ou
brucelles en 5.2.2 et en 8.2.3;
— correction des Formules (A.1) à (A.8);
— révision de la cohérence grammaticale et linguistique des définitions en 4.3, 8.1.3, 8.2.2, 9.2.1,
A.1 et A.2.
iv © ISO 2021 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 1973:2021(F)

Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www .iso .org/ fr/ members .html.
© ISO 2021 – Tous droits réservés v

---------------------- Page: 5 ----------------------
ISO 1973:2021(F)

Introduction
La masse linéique de fibres individuelles est l’une des plus importantes caractéristiques physiques en
matière de mise en œuvre et de prévisibilité concernant le produit intermédiaire à une étape suivante,
comme les fils et les nontissés. Outre les autres méthodes d’essai, comme la perméabilité à l’air des
éprouvettes constituées d’une masse de fibres (micronaire), le présent document décrit deux méthodes
de mesure pour déterminer la masse par unité de longueur (masse linéique) à l’aide d’un faisceau
de 50 fils ou de fibres individuelles. Alors que la première méthode détermine uniquement une valeur
moyenne dans un délai relativement court, la seconde méthode mesure le titre des fibres individuelles
et aussi, par conséquent, la distribution statistique de l'échantillon de laboratoire.
vi © ISO 2021 – Tous droits réservés

---------------------- Page: 6 ----------------------
NORME INTERNATIONALE ISO 1973:2021(F)
Fibres textiles — Détermination de la masse linéique —
Méthode gravimétrique et méthode au vibroscope
1 Domaine d’application
Le présent document spécifie une méthode gravimétrique et une méthode au vibroscope pour
déterminer la masse linéique des fibres textiles. Ces méthodes s’appliquent respectivement aux:
a) faisceaux de fibres;
b) fibres individuelles.
Des données utiles peuvent être obtenues pour les fibres chimiques, mais elles sont moins fidèles pour
les fibres naturelles.
Le présent document ne peut être appliqué qu’aux fibres pouvant être maintenues rectilignes (parallèles
dans le cas de faisceaux) pendant la préparation des essais. Il s’applique parfaitement lorsque les fibres
sont aisément défrisées. Les méthodes mentionnées dans le présent document ne s’appliquent pas aux
fibres profilées.
La méthode au vibroscope n’est pas toujours applicable aux fibres creuses et plates (comme des rubans).
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu’ils constituent, pour tout ou partie de leur
contenu, des exigences du présent document. Pour les références datées, seule l’édition citée s’applique.
Pour les références non datées, la dernière édition du document de référence s'applique (y compris les
éventuels amendements).
ISO 139, Textiles — Atmosphères normales de conditionnement et d'essai
ISO 1130, Fibres textiles — Diverses méthodes d'échantillonnage en vue des essais
ISO 6989, Fibres textiles — Détermination de la longueur et de la distribution de longueur des fibres
discontinues (par le mesurage de fibres individuelles)
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions suivants s’appliquent.
L’ISO et l’IEC tiennent à jour des bases de données terminologiques destinées à être utilisées en
normalisation, consultables aux adresses suivantes:
— ISO Online browsing platform: disponible à l’adresse https:// www .iso .org/ obp
— IEC Electropedia: disponible à l’adresse http:// www .electropedia .org/
3.1
tension
force entraînant l’extension d’un corps
© ISO 2021 – Tous droits réservés 1

---------------------- Page: 7 ----------------------
ISO 1973:2021(F)

3.2
force de tension
force exercée sur une éprouvette de fibres lors de l’essai au vibroscope
Note 1 à l'article: Dans les essais textiles, la force de tension appliquée est fonction de la masse linéique ou de
l’aire de la section transversale.
4 Principe
4.1 Généralités
Deux méthodes de détermination de la masse linéique sont décrites.
4.2 Méthode gravimétrique, pour faisceaux de fibres
Les éprouvettes d’une longueur donnée sont pesées à l’aide d’une balance. La présente méthode est
applicable aux faisceaux de fibres.
4.3 Méthode au vibroscope, pour fibres individuelles
Les fibres individuelles d’une longueur donnée et soumises à une force de tension spécifiée sont sujettes
à des vibrations à la fréquence de résonance. La masse linéique est déterminée à partir des conditions
de l’état de résonance, à savoir la fréquence de résonance, la longueur vibrante de la fibre et la force
de tension. La masse linéique est directement lue sur l’échelle ou sur l’affichage du vibroscope ou est
reportée par un système informatique connecté. La présente méthode part du principe que la masse
linéique de la longueur de la fibre soumise à essai est constante.
Dans certaines circonstances (par exemple, une longueur vibrante courte, une faible force de tension,
des fibres à haut module), les résultats de la méthode au vibroscope sont faussés par la rigidité à la
flexion de la fibre. En tant que contre-mesure pour compenser, un facteur de correction peut être
appliqué (voir en 8.2.1), si ce dernier fait l’objet d’un accord entre les parties intéressées.
5 Appareillage
5.1 Appareillage pour la méthode gravimétrique
5.1.1 Balance, pouvant peser les faisceaux de fibres selon une exactitude d’au moins ± 1 %.
5.1.2 Dispositif de coupe, permettant de couper les faisceaux sous tension à une longueur connue à
une exactitude de ± 1 % et de régler la tension des faisceaux à couper.
Par exemple, deux lames de rasoir positionnées parallèlement dans un support adapté peuvent être
utilisées.
5.1.3 Peigne, pour aligner préalablement les fibres.
5.1.4 Étoffe du support textile, d’une couleur contrastant avec celle des fibres à soumettre à essai.
5.1.5 Plaque de verre, mesurant approximativement 100 mm × 200 mm, pourvue d’un bord poli.
2 © ISO 2021 – Tous droits réservés

-------------------
...

INTERNATIONAL ISO
STANDARD 1973
Third edition
Textile fibres — Determination of
linear density — Gravimetric method
and vibroscope method
Fibres textiles — Détermination de la masse linéique — Méthode
gravimétrique et méthode au vibroscope
PROOF/ÉPREUVE
Reference number
ISO 1973:2020(E)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO 1973:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 1973:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
4.1 General . 2
4.2 Gravimetric method, for bundles of fibres . 2
4.3 Vibroscope method, for individual fibres . 2
5 Apparatus . 2
5.1 Gravimetric method apparatus . 2
5.2 Vibroscope method apparatus . 2
6 Sampling . 3
7 Conditioning and testing atmospheres . 3
8 Procedure. 3
8.1 Gravimetric method . 3
8.2 Vibroscope method . 3
9 Expression of results . 4
9.1 General . 4
9.2 Gravimetric method . 4
9.3 Vibroscope method . 5
10 Test report . 5
Annex A (informative) Examples of calculation of mean linear density . 7
Bibliography .10
© ISO 2020 – All rights reserved PROOF/ÉPREUVE iii

---------------------- Page: 3 ----------------------
ISO 1973:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 23,
Fibres and yarns, in collaboration with the European Committee for Standardization (CEN) Technical
Committee CEN/TC 248,Textiles and textile products, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO1973: 1995), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— ISO 6989 has been added as a normative reference in Clauses 2 and 8.2.1;
— a note specifying the tension application has been added in 3.2;
— a correction factor (for measurements on stiff fibres) has been permitted in 4.3, 8.2.1 and 10.3;
— testing equipment without a scale but with a display, respectively connection to a computer system
in 4.3 for linear density reading is permitted ;
— reference to 5.2.2 “Forceps” (instead of 5.1.6) has been corrected;
— automatic application of a loading force instead of the use of forceps in 5.2.2 and 8.2.3 is permitted;
— Formulae (A.1) to (A.8) have been corrected;
— grammar and linguistic consistency of definitions in 4.3, 8.1.3, 8.2.2, 9.2.1, A.1 and A.2 have been
reviewed.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv PROOF/ÉPREUVE © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 1973:2020(E)

Introduction
The linear density of individual fibres is one of the most important physical characteristics in terms
of processability and predictability of the next-step intermediate product, such as spun-yarns and
nonwovens. Other than testing methods, such as air-permeability on test specimen consisting of mass
of fibres (Micronaire), this document describes two measurement methods to determine the mass per
unit length (= linear density) using either a bundle of 50 fibres, or on individual fibres. While the first
method determines an average value, only, in relatively short time, the second method measures the
individual fibre fineness and therefore the statistical distribution of the laboratory sample, too.
© ISO 2020 – All rights reserved PROOF/ÉPREUVE v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 1973:2020(E)
Textile fibres — Determination of linear density —
Gravimetric method and vibroscope method
1 Scope
This document specifies a gravimetric method and a vibroscope method for the determination of the
linear density of textile fibres applicable respectively to:
a) bundles of fibres;
b) individual fibres.
Useful data can be obtained on man-made fibres and, with less precision, on natural fibres.
This document only applies to fibres which can be kept straight and, in the case of bundles, parallel,
during test preparation. It is properly applicable when the fibres are readily freed of crimp. The methods
in this document are not applicable to tapered fibres.
The vibroscope method is not always applicable to hollow and flat (ribbon-like) fibres.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 139, Textiles — Standard atmospheres for conditioning and testing
ISO 1130, Textile fibres — Some methods of sampling for testing
ISO 6989, Textile fibres — Determination of length and length distribution of staple fibres (by measurement
of single fibres)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
tension
force tending to cause the extension of a body
3.2
tensioning force
force effective on a fibre specimen during the vibroscope test
Note 1 to entry: In textile testing, the tensioning force applied is based on the linear density or cross-sectional area.
© ISO 2020 – All rights reserved PROOF/ÉPREUVE 1

---------------------- Page: 6 ----------------------
ISO 1973:2020(E)

4 Principle
4.1 General
Two methods for determining linear density are described.
4.2 Gravimetric method, for bundles of fibres
Specimens of a given length are weighed on a balance. This method is applicable to bundles of fibres.
4.3 Vibroscope method, for individual fibres
Individual fibres of a given length and under specified tensioning force are subjected to vibration at
resonance frequency. The linear density is determined from the conditions of the resonance state, i.e.
the resonance frequency, the vibrating length of the fibre and the tensioning force. The linear density is
read directly on the scale or a display of the vibroscope apparatus respectively reported by a connected
computer system. This method assumes that the linear density of the tested length of the fibre is
constant.
Under certain circumstances (e.g. a short vibrating length, a low tensioning force, high-modulus fibres)
the vibroscopic method results are falsified by the bending stiffness of the fibre. As a compensating
countermeasure, a correction factor can be applied (refer to 8.2.1), if agreed on by the interested
parties.
5 Apparatus
5.1 Gravimetric method apparatus
5.1.1 Balance, suitable for weighing the bundles of to an accuracy of at least ±1 %.
5.1.2 Device for cutting, the bundles under tension to a length known within an accuracy of ±1 % and
allowing an adjustment of the tension of the bundles to be cut.
For example, two razor blades set parallel in a suitable holder may be used.
5.1.3 Comb sorter, for preliminary alignment of fibres.
5.1.4 Textile support fabric, of a colour contr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.