SIST EN 62026-3:2016/A11:2020

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

IEC 62026-3:2014 specifies an interface system between single or multiple controllers, and control circuit devices or switching elements. The interface system uses two conductor pairs within one cable - one of these pairs provides a differential communication medium and the other pair provides power to the devices. This part establishes requirements for the interoperability of components with such interfaces. This third edition of IEC 62026-3 cancels and replaces the second edition published in 2008. This third edition constitutes a technical revision. The main changes with respect to the previous edition are the followings:
- specification of group 4 messages (5.1.2);
- clarifications on messaging protocol (5.2);
- addition of I/O multicast poll messages (5.5.2 and 5.5.8);
- clarifications on slave behaviour (5.5.4 and 5.5.9);
- clarifications on physical layer (transceiver) in 5.7;
- miscellaneous corrections/clarifications on cable (8.2);
- clarifications on EMC testing (9.2.10) and logical testing (9.3).

Niederspannungsschaltgeräte - Steuerung-Geräte-Netzwerke (CDIs) - Teil 3: DeviceNet

Appareillage à basse tension - Interfaces appareil de commande-appareil (CDI) - Partie 3: DeviceNet

Nizkonapetostne stikalne in krmilne naprave - Vmesniki krmilne naprave (CDIs) - 3. del: DeviceNet - Dopolnilo A11

General Information

• Status: Published
• Publication Date: 08-Mar-2020
• ICS: 29.130.20 - Low voltage switchgear and controlgear
• Technical Committee: SKA - Switchgear and control gear
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Mar-2020
• Due Date: 08-May-2020
• Completion Date: 09-Mar-2020
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: EN 62026-3:2015/A11:2020 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

Relations

• Amends: SIST EN 62026-3:2016 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
• Effective Date: 26-Jun-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62026-3:2016/A11:2020
01-maj-2020
Nizkonapetostne stikalne in krmilne naprave - Vmesniki krmilne naprave (CDIs) - 3.
del: DeviceNet - Dopolnilo A11
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3:
DeviceNet
Niederspannungsschaltgeräte - Steuerung-Geräte-Netzwerke (CDIs) - Teil 3: DeviceNet
Appareillage à basse tension - Interfaces appareil de commande-appareil (CDI) - Partie
3: DeviceNet
Ta slovenski standard je istoveten z: EN 62026-3:2015/A11:2020
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN 62026-3:2016/A11:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62026-3:2016/A11:2020

---------------------- Page: 2 ----------------------
SIST EN 62026-3:2016/A11:2020


EUROPEAN STANDARD EN 62026-3:2015/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2020
ICS 29.130.20

English Version
Low-voltage switchgear and controlgear - Controller-device
interfaces (CDIs) - Part 3: DeviceNet
Appareillage à basse tension - Interfaces appareil de Niederspannungsschaltgeräte - Steuerung-Geräte-
commande-appareil (CDI) - Partie 3: DeviceNet Netzwerke (CDIs) - Teil 3: DeviceNet
This amendment A11 modifies the European Standard EN 62026-3:2015; it was approved by CENELEC on 2019-12-11. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62026-3:2015/A11:2020 E

---------------------- Page: 3 ----------------------
SIST EN 62026-3:2016/A11:2020
European foreword
This document (EN 62026-3:2015/A11:2020) has been prepared by CLC/TC 121A “Low-voltage
switchgear and controlgear”.
The following dates are fixed:
• latest date by which this document has (dop) 2020-12-11
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2022-12-11
standards conflicting with this document
have to be withdrawn
This document amends EN 62026-3:2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all
...