Metallic industrial piping - Part 2: Materials

This Part of this European Standard specifies the requirements for materials (including metallic clad materials) for industrial piping and supports covered by EN 13480-1 manufactured from of metallic materials. It is currently limited to steels with sufficient ductility. This Part of this European Standard is not applicable to materials in the creep range. Revision of Table B.2-9 (bolts and nuts) with respect to changes made in latest version of EN 10269:2013.

Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe

Dieser Teil der EN 13480 legt die Anforderungen an Werkstoffe (einschließlich Plattierungswerkstoffe) für Rohrleitungen nach der EN 13480-1 aus metallischen Werkstoffen fest; sie ist zur Zeit auf Stähle ausreichender Duktilität begrenzt. Dieser Teil gilt nicht im Zeitstandbereich. Die Norm legt das für diese Werkstoffe anzuwendende Konformitätsbewertungsverfahren fest. Ferner enthält sie Regeln für die Festlegung von technischen Lieferbedingungen für Werkstoffe für Rohrleitungen.

Tuyauteries industrielles métalliques - Partie 2: Matériaux

La présente partie de la présente norme européenne spécifie les exigences relatives aux matériaux (y compris les matériaux métalliques plaqués) pour tuyauteries industrielles et supports fabriqués à partir de matériaux métalliques et couverts par prEN 13480-1. Elle est limitée actuellement aux aciers ayant une ductilité suffisante. La norme ne s'applique pas dans le domaine du fluage.
NOTE   D'autres matériaux seront ajoutés ultérieurement par amendements.
Elle spécifie les exigences relatives au choix, à l'inspection, au contrôle et au marquage des matériaux métalliques destinés à la fabrication des tuyauteries industrielles.

Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A1

General Information

Status
Published
Public Enquiry End Date
24-Apr-2018
Publication Date
11-Nov-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Nov-2018
Due Date
11-Jan-2019
Completion Date
12-Nov-2018

Relations

Buy Standard

Amendment
EN 13480-2:2018/A1:2018
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN 13480-2:2018/kFprA1:2018
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN 13480-2:2012/oprA8:2017
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-2:2018/A1:2018
01-december-2018
Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A1
Metallic industrial piping - Part 2: Materials
Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
Tuyauteries industrielles métalliques - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13480-2:2017/A1:2018
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-2:2018/A1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-2:2018/A1:2018

---------------------- Page: 2 ----------------------

SIST EN 13480-2:2018/A1:2018


EN 13480-2:2017/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 23.040.01
English Version

Metallic industrial piping - Part 2: Materials
Tuyauteries industrielles métalliques - Partie 2 : Metallische industrielle Rohrleitungen - Teil 2:
Matériaux Werkstoffe
This amendment A1 modifies the European Standard EN 13480-2:2017; it was approved by CEN on 4 June 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-2:2017/A1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-2:2018/A1:2018
EN 13480-2:2017/A1:2018 (E)
Contents Page
European foreword . 3
1 Modifications to Clause 2, Normative references . 4
2 Modifications to B.2.2.4, Bolts and nuts . 5
3 Modification to B.2.2.5, Lowest minimum metal temperature for austenitic stainless
steels . 7
4 Modification to D.2, European standardised steels grouped according to product
forms . 7
5 Addition of Annex E (normative), Special provisions for materials and components . 7
6 Modification to the final Bibliography. 9

2

---------------------- Page: 4 ----------------------

SIST EN 13480-2:2018/A1:2018
EN 13480-2:2017/A1:2018 (E)
European foreword
This document (EN 13480-2:2017/A1:2018) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of
EN 13480-2:2017.
This document includes the text of the amendment itself. The amended/corrected pages of
EN 13480-2:2017 will be published as Issue 2 of the European Standard.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 13480-2:2018/A1:2018
EN 13480-2:2017/A1:2018 (E)
1 Modifications to Clause 2, Normative references
After EN 1092‐1:2007, add the following new references:
“EN 1515-4:2009, Flanges and their joints — Bolting — Part 4: Selection of bolting for equipment subject
to the Pressure Equipment Directive 97/23/EC
EN 1591-1:2013, Flanges and their joints — Design rules for gasketed circular flange connections —
Part 1: Calculation
EN 1591-2:2008, Flanges and their joints — Design rules for gasketed circular flange connections —
Part 2: Gasket parameters
CEN/TS 1591-3:2007, Flanges and their joints — Design rules for gasketed circular flange connections —
Part 3: Calculation method for metal to metal contact type flanged joint
EN 1591-4:2013, Flanges and their joints — Part 4: Qualification of personnel competency in the assembly
of the bolted connections of critical service pressurized systems
CEN/TR 1591-5:2012, Flanges and their joints — Design rules for gasketed circular flange connections —
Part 5: Calculation method for full face gasketed joints”.
Delete the following reference:
“EN 10028-7:2007, Flat products made of steels for pressure purposes — Part 7: Stainless steels”.
Replace:
“EN 10269:1999+A1:2006, Steels and nickel alloys for fasteners with specified elevated and/or low
temperature properties”
with:
“EN 10269:2013, Steels and nickel alloys for fasteners with specified elevated and/or low temperature
properties”.
Replace:
“EN ISO 898-1:2009, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1:
Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread (ISO 898‐
1:2009)”
with:
“EN ISO 898-1:2013, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1:
Bolts, screws and studs with specified property classes ‐ Coarse thread and fine pitch thread
(ISO 898‐1:2013)”.
After EN 12074:1999, add the following new references:
“EN 13445-2:2014, Unfired pressure vessels — Part 2: Materials
EN 13445-3:2014, Unfired pressure vessels — Part 3: Design”.
Delete:
“EN 20898-2:1993, Mechanical properties of fasteners — Part 2: Nuts with specified proof load values —
Coarse thread”
and add the following new reference after EN ISO 898‐1:2013:
“EN
...

SLOVENSKI STANDARD
SIST EN 13480-2:2018/kFprA1:2018
01-april-2018
Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A1
Metallic industrial piping - Part 2: Materials
Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
Tuyauteries industrielles métalliques - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13480-2:2017/FprA1
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-2:2018/kFprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13480-2:2018/kFprA1:2018

---------------------- Page: 2 ----------------------
SIST EN 13480-2:2018/kFprA1:2018


FINAL DRAFT
EUROPEAN STANDARD
EN 13480-2:2017
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
March 2018
ICS 23.040.01
English Version

Metallic industrial piping - Part 2: Materials
Tuyauteries industrielles métalliques - Partie 2 : Metallische industrielle Rohrleitungen - Teil 2:
Matériaux Werkstoffe
This draft amendment is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC
267.

This draft amendment A1, if approved, will modify the European Standard EN 13480-2:2017. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-2:2017/FprA1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13480-2:2018/kFprA1:2018
EN 13480-2:2017/FprA1:2018 (E)
Contents Page
European foreword . 3
1 Modifications to Clause 2, Normative references . 4
2 Modifications to B.2.2.4, Bolts and nuts . 5
3 Modification to B.2.2.5, Lowest minimum metal temperature for austenitic stainless
steels . 8
4 Modification to D.2, European standardised steels grouped according to product
forms . 8
5 Addition of Annex E (normative), Special provisions for materials and components . 8
6 Modification to the final Bibliography. 10

2

---------------------- Page: 4 ----------------------
SIST EN 13480-2:2018/kFprA1:2018
EN 13480-2:2017/FprA1:2018 (E)
European foreword
This document (EN 13480-2:2017/FprA1:2018) has been prepared by Technical Committee
CEN/TC 267 “Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Formal Vote.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
This document includes the text of the amendment itself. The amended/corrected pages of
EN 13480-2:2017 will be published as Issue 2 of the European Standard.
3

---------------------- Page: 5 ----------------------
SIST EN 13480-2:2018/kFprA1:2018
EN 13480-2:2017/FprA1:2018 (E)
1 Modifications to Clause 2, Normative references
After EN 1092‐1:2007, add the following new references:
“EN 1515-4:2009, Flanges and their joints — Bolting — Part 4: Selection of bolting for equipment subject
to the Pressure Equipment Directive 97/23/EC
EN 1591‐1:2013, Flanges and their joints — Design rules for gasketed circular flange connections —
Part 1: Calculation
EN 1591‐2:2008, Flanges and their joints — Design rules for gasketed circular flange connections —
Part 2: Gasket parameters
CEN/TS 1591‐3:2007, Flanges and their joints — Design rules for gasketed circular flange connections —
Part 3: Calculation method for metal to metal contact type flanged joint
EN 1591‐4:2013, Flanges and their joints — Part 4: Qualification of personnel competency in the assembly
of the bolted connections of critical service pressurized systems
CEN/TR 1591‐5:2012, Flanges and their joints — Design rules for gasketed circular flange connections —
Part 5: Calculation method for full face gasketed joints”.
Delete the following reference:
“EN 10028‐7:2007, Flat products made of steels for pressure purposes — Part 7: Stainless steels”.
Replace:
“EN 10269:1999+A1:2006, Steels and nickel alloys for fasteners with specified elevated and/or low
temperature properties”
with:
“EN 10269:2013, Steels and nickel alloys for fasteners with specified elevated and/or low temperature
properties”.
Replace:
“EN ISO 898-1:2009, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1:
Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread (ISO 898‐
1:2009)”
with:
“EN ISO 898-1:2013, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1:
Bolts, screws and studs with specified property classes ‐ Coarse thread and fine pitch thread
(ISO 898‐1:2013)”.
After EN 12074:1999, add the following new references:
“EN 13445-2:2014, Unfired pressure vessels — Part 2: Materials
EN 13445-3:2014, Unfired pressure vessels — Part 3: Design”.
Delete:
“EN 20898-2:1993, Mechanical properties of fasteners — Part 2: Nuts with specified proof load values —
Coarse thread”
and add the following new reference after EN ISO 898‐1:2013:
“EN ISO 898-2:2012, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2:
Nuts with specified property classes — Coarse thread and fine pitch thread (ISO 898‐2:2012)”.
4

---------------------- Page: 6 ----------------------
SIST EN 13480-2:2018/kFprA1:2018
EN 13480-2:2017/FprA1:2018 (E)
After EN ISO 2
...

SLOVENSKI STANDARD
SIST EN 13480-2:2012/oprA8:2017
01-marec-2017
Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A8
Metallic industrial piping - Part 2: Materials
Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
Tuyauteries industrielles métalliques - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13480-2:2012/prA8
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-2:2012/oprA8:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13480-2:2012/oprA8:2017

---------------------- Page: 2 ----------------------
SIST EN 13480-2:2012/oprA8:2017


DRAFT
EUROPEAN STANDARD
EN 13480-2:2012
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA8
February 2017
ICS 23.040.01
English Version

Metallic industrial piping - Part 2: Materials
Tuyauteries industrielles métalliques - Partie 2: Metallische industrielle Rohrleitungen - Teil 2:
Matériaux Werkstoffe
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 267.

This draft amendment A8, if approved, will modify the European Standard EN 13480-2:2012. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-2:2012/prA8:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13480-2:2012/oprA8:2017
EN 13480-2:2012/prA8:2017 (E)
Contents Page
European foreword . 3
1 Modifications to B.2.2.4, Bolts and nuts . 4
2 Modification to B.2.2.5, Lowest minimum metal temperature for austenitic stainless
steels. 6
3 Modification to D.2, European standardised steels grouped according to product
forms . 6
4 Addition of Annex E, Special provisions for materials and components . 6

2

---------------------- Page: 4 ----------------------
SIST EN 13480-2:2012/oprA8:2017
EN 13480-2:2012/prA8:2017 (E)
European foreword
This document (EN 13480-2:2012/prA8:2017) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA of EN 13480-2:2012, which is an
integral part of this document.
This document includes the text of the amendment itself. The amended/corrected pages of
EN 13480-2:2012 will be published in the new Edition 2017 of the European Standard.
Additional Amendments EN 13480-2:2012/prA2 to prA7, prA9 and prA10 are being prepared by
Technical Committee CEN/TC 267 “Industrial piping and pipelines”.
3

---------------------- Page: 5 ----------------------
SIST EN 13480-2:2012/oprA8:2017
EN 13480-2:2012/prA8:2017 (E)
1 Modifications to B.2.2.4, Bolts and nuts
Replace the text in B.2.2.4 with the following:
"Requirements for prevention of brittle fracture are specified in Tables B.2-8, B.2-9 and B.2-10.
For other bolts and nuts, the following applies:
 a specified impact energy of minimum 40 J is required at T = RT for T = ≥ −10 °C;
KV M
 if T is lower than −10 °C, specified impact energy of minimum 40 J is required at T ≤ T ;
M KV M
 bolting material with a design temperature below –160 °C shall be impact tested at –196 °C.".
Replace Table B.2-8 with the following:
"Table B.2–8 — General requirements for prevention of brittle fracture
with reference th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.