SIST EN 16127:2012
(Main)Solid biofuels - Determination of length and diameter for pellets and cylindrical briquettes
Solid biofuels - Determination of length and diameter for pellets and cylindrical briquettes
This document aims to define the requirements and method used to measure the length and diameter of fuel pellets. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to fuel pellets, and to all persons and organisations involved in producing, purchasing, selling and utilising fuel pellets.
Feste Biobrennstoffe - Bestimmung der Länge und des Durchmessers von Pellets
Das Ziel dieses Dokuments besteht darin, die Anforderungen und Verfahren zur Messung der Länge und des Durchmessers von Brennstoff-Pellets festzulegen. Dieses Dokument ist für Personen und Organisationen bestimmt, die im Zusammenhang mit Brennstoff-Pellets Maschinen, Ausrüstung, Werkzeuge und vollständige Anlagen herstellen, planen, verkaufen, montieren oder anwenden, und für alle Personen und Organisationen, die an der Herstellung, dem Einkauf, dem Verkauf und der Nutzung von Brennstoff-Pellets beteiligt sind.
Biocombustibles solides - Détermination de la longueur et du diamètre des pastilles
Le présent document a pour objet de définir les exigences et la méthode utilisée pour mesurer la longueur et le diamètre des pastilles de combustible. Elle s’adresse aux fabricants, concepteurs, vendeurs, installateurs et utilisateurs de matériel, d’équipement, d’outils et d’usines complètes où sont utilisées ces pastilles de combustible, ainsi qu’aux producteurs, acheteurs, vendeurs et utilisateurs de ces pastilles, qu’il s’agisse d’individus ou d’organisations.
Trdna biogoriva - Ugotavljanje širine in premera peletov in cilindričnih briketov
Cilj tega dokumenta je opredelitev zahtev in metod, ki se uporabljajo za merjenje širine in premera gorivnih peletov. Namenjena je osebam in organizacijam, ki proizvajajo, načrtujejo, prodajajo, sestavljajo ali uporabljajo stroje, opremo, orodja in celotne obrate, povezane z gorivnimi peleti, ter vsem osebam in organizacijam, ki so vključene v proizvodnjo, nabavo, prodajo in izkoriščanje gorivnih peletov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Feste Biobrennstoffe - Bestimmung der Länge und des Durchmessers von PelletsBiocombustibles solides - Détermination de la longueur et du diamètre des pastillesSolid biofuels - Determination of length and diameter for pellets and cylindrical briquettes75.160.10Trda gorivaSolid fuelsICS:Ta slovenski standard je istoveten z:EN 16127:2012SIST EN 16127:2012en,fr,de01-maj-2012SIST EN 16127:2012SLOVENSKI
STANDARD
SIST EN 16127:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16127
February 2012 ICS 75.160.10 English Version
Solid biofuels - Determination of length and diameter of pellets Biocombustibles solides - Détermination de la distribution granulométrique des granulés et des briquettes cylindriques Feste Biobrennstoffe - Bestimmung der Länge und des Durchmessers von Pellets This European Standard was approved by CEN on 8 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16127:2012: ESIST EN 16127:2012
EN 16127:2012 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Principle .55 Apparatus .65.1 Measuring caliper .65.2 Sample reduction equipment .65.3 Balance .66 Sample preparation .67 Procedure .77.1 General .77.2 Procedure A: Determination of share of oversized pellets .77.2.1 Weighing .77.2.2 Sorting by length .77.2.3 Weighing of the fractions .77.2.4 Measuring of pellet diameter .77.3 Procedure B: Determination of the average length of pellets .77.3.1 Measuring of individual pellet length .77.3.2 Measuring of pellet diameter .88 Calculations .88.1 Share of oversized pellets .88.2 Average length of pellets .89 Test report .810 Precision and bias .8Bibliography .9 SIST EN 16127:2012
EN 16127:2012 (E) 3 Foreword This document (EN 16127:2012) has been prepared by Technical Committee CEN/TC 335 “Solid biofuels”, the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icela
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.