Ferroniobium -- Specification and conditions of delivery

Refers to ferroniobium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.

Ferro-niobium -- Spécifications et conditions de livraison

Feroniobij - Specifikacija in dobavni pogoji

General Information

Status
Published
Publication Date
31-Mar-2000
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-2000
Due Date
01-Apr-2000
Completion Date
01-Apr-2000

Buy Standard

Standard
ISO 5453:1980 - Ferroniobium -- Specification and conditions of delivery
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 5453:2000
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 5453:1980 - Ferro-niobium -- Spécifications et conditions de livraison
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 5453:1980 - Ferro-niobium -- Spécifications et conditions de livraison
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX,4YHAPOAHAR OPI-AHM3AL&lR fl0 CTAH~APTVl3Al@Wl~RGANISATION INTERNATIONALE DE NORMALISATION
Ferroniobium - Specification and conditions of delivery
Ferro-niobium - Spkifications et conditions de livraison
First edition - 1980-12-01
UDC 669.15’293498
Ref. No. ISO 5453-1980 (EI
Descriptors : ferroailoys, specifications, delivery conditions, Chemical composition.
Price based on 3 pages

---------------------- Page: 1 ----------------------
FO reword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bedies). The work of developing lnter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 5453 was developed by Technical Committee ISO/TC 132,
Ferroaloys, and was circulated to the member bodies in November 1979.
lt has been approved by the member bodies of the following countries :
Australia Germany, F. R.
Romania
Austria India South Africa, Rep. of
Brazil Italy Sweden
Canada United Kingdom
Japan
China Norway USA
Czechoslovakia Poland USSR
France Portugal Y ugoslavia
No member body expressed disapproval of the document.
0 International Organkation for Standardkation, 1980
Printed in Switzerland

---------------------- Page: 2 ----------------------
ISO 5453-1980 (E)
INTERNATIONALSTANDARD
- Specification and conditions of delivery
Ferroniobium
1 Scope and field of application 5 Requirements
This International Standard specifies requirements and con-
5.1 Constitution of consignment
ditions of delivery for ferroniobium usually supplied for steel-
making and foundry use.
Ferroniobium shall be delivered in consignments constituted by
one of the following methods.
2 References
51.1 Tapped lot method
ISO 565, Test sieves - Wo ven me tal wire clo th and perfora ted
A consignment constituted by the tapped lot method consists
plate - Nominal sizes of apertures.
of a ferroniobium mass of one melt (or one part of a continuous
tap) n
ISO 3713, Ferroalloys - Sampling and preparation of samples
-
General rules. 1)
5.1.2 Graded lot method
A consignment constituted by the graded lot method consists
of a number of melts (or Parts of continuous taps) of one
3 Definition
ferroniobium designation.
3.1 ferroniobium : A master alloy of iron and niobium with
The niobium content of the melts (or Parts of continuous taps)
a minimum niobium content of 55,0 % by mass, and a max-
constituting the consignment shall not differ from each other
imum niobium content of 70,O % by mass, obtained by reduc-
by more than 3 % absolute.
tion.
51.3 Blended lot method
4 Information for ordering
A consignment constituted by the blended lot method consists
of a number of melts (or Parts of continuous taps) of one
Orders for ferroniobium shall include the following information.
ferroniobium designation, which have been crushed to a parti-
cle size less than 50 mm and thoroughly mixed.
a) Quantity.
The content of the main constituent of the melts (or Parts of
b) Constitution of consignment.
continuous taps) constituting the consignment may vary
between the minimum and maximum limits specified for the
c) Chemical composition in accordance with the designa-
appropriate ferroniobium designation.
tions given in table 1.
d) Particle size ranges in accordance with the classes
5.2 Chemical composition
given in table 2.
5.2.1 The Chemical composition of ferroniobium shall be as
e) Necessary requirements for analysis reports, packing,
specified in table 1. The limits stated correspond to particle size
etc., as appropriate.
ranges in classes 1 to 4 in accordance with table 2.
1) At present at the Stage of draft.

---------------------- Page: 3 ----------------------
ISO 54534980 (El
5.2.2 The Chemical compositions given in table 1 show only 6.1.3 If required, arbitration sampling shall be carried out by
an arbitrator Chosen by mutual agreement between supplier
the main constituent elements and usual impurities. If the pur-
and purchaser. Sampling shall be carried out by the method
chaser requires closer ranges for the main element contents
and/or different limits for specified elements and/or limits for specified in ISO 3713, but other methods of sampling having
similar precision may be agreed upon between supplier, pur-
non-specified elements, this shall be agreed upon between sup-
plier and purchaser. chaser and arbitrator.
The Sample obtained by arbitration shall be accepted by both
5.2.3 The Chemical compos
...

SLOVENSKI STANDARD
SIST ISO 5453:2000
01-april-2000
Feroniobij - Specifikacija in dobavni pogoji
Ferroniobium -- Specification and conditions of delivery
Ferro-niobium -- Spécifications et conditions de livraison
Ta slovenski standard je istoveten z: ISO 5453:1980
ICS:
77.100 Železove zlitine Ferroalloys
SIST ISO 5453:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 5453:2000

---------------------- Page: 2 ----------------------

SIST ISO 5453:2000
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX,4YHAPOAHAR OPI-AHM3AL&lR fl0 CTAH~APTVl3Al@Wl~RGANISATION INTERNATIONALE DE NORMALISATION
Ferroniobium - Specification and conditions of delivery
Ferro-niobium - Spkifications et conditions de livraison
First edition - 1980-12-01
UDC 669.15’293498
Ref. No. ISO 5453-1980 (EI
Descriptors : ferroailoys, specifications, delivery conditions, Chemical composition.
Price based on 3 pages

---------------------- Page: 3 ----------------------

SIST ISO 5453:2000
FO reword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bedies). The work of developing lnter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 5453 was developed by Technical Committee ISO/TC 132,
Ferroaloys, and was circulated to the member bodies in November 1979.
lt has been approved by the member bodies of the following countries :
Australia Germany, F. R.
Romania
Austria India South Africa, Rep. of
Brazil Italy Sweden
Canada United Kingdom
Japan
China Norway USA
Czechoslovakia Poland USSR
France Portugal Y ugoslavia
No member body expressed disapproval of the document.
0 International Organkation for Standardkation, 1980
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 5453:2000
ISO 5453-1980 (E)
INTERNATIONALSTANDARD
- Specification and conditions of delivery
Ferroniobium
1 Scope and field of application 5 Requirements
This International Standard specifies requirements and con-
5.1 Constitution of consignment
ditions of delivery for ferroniobium usually supplied for steel-
making and foundry use.
Ferroniobium shall be delivered in consignments constituted by
one of the following methods.
2 References
51.1 Tapped lot method
ISO 565, Test sieves - Wo ven me tal wire clo th and perfora ted
A consignment constituted by the tapped lot method consists
plate - Nominal sizes of apertures.
of a ferroniobium mass of one melt (or one part of a continuous
tap) n
ISO 3713, Ferroalloys - Sampling and preparation of samples
-
General rules. 1)
5.1.2 Graded lot method
A consignment constituted by the graded lot method consists
of a number of melts (or Parts of continuous taps) of one
3 Definition
ferroniobium designation.
3.1 ferroniobium : A master alloy of iron and niobium with
The niobium content of the melts (or Parts of continuous taps)
a minimum niobium content of 55,0 % by mass, and a max-
constituting the consignment shall not differ from each other
imum niobium content of 70,O % by mass, obtained by reduc-
by more than 3 % absolute.
tion.
51.3 Blended lot method
4 Information for ordering
A consignment constituted by the blended lot method consists
of a number of melts (or Parts of continuous taps) of one
Orders for ferroniobium shall include the following information.
ferroniobium designation, which have been crushed to a parti-
cle size less than 50 mm and thoroughly mixed.
a) Quantity.
The content of the main constituent of the melts (or Parts of
b) Constitution of consignment.
continuous taps) constituting the consignment may vary
between the minimum and maximum limits specified for the
c) Chemical composition in accordance with the designa-
appropriate ferroniobium designation.
tions given in table 1.
d) Particle size ranges in accordance with the classes
5.2 Chemical composition
given in table 2.
5.2.1 The Chemical composition of ferroniobium shall be as
e) Necessary requirements for analysis reports, packing,
specified in table 1. The limits stated correspond to particle size
etc., as appropriate.
ranges in classes 1 to 4 in accordance with table 2.
1) At present at the Stage of draft.

---------------------- Page: 5 ----------------------

SIST ISO 5453:2000
ISO 54534980 (El
5.2.2 The Chemical compositions given in table 1 show only 6.1.3 If required, arbitration sampling shall be carried out by
an arbitrator Chosen by mutual agreement between supplier
the main constituent elements and usual impurities. If the pur-
and purchaser. Sampling shall be carried out by
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWE~YHAPO~HAR OPTAHMSA~IMI ll0 CTAHjJAPTM3A~MM~RGANISATION INTERNATIONALE DE NORMALISATION
- Spécifications et conditions de livraison
Ferro-niobium
Ferroniobium - Specification and conditions of delivery
Première édition - 1980-12-01
Réf. no : ISO 54534980 (F)
CDU 669.1X293-198
Descripteurs : ferro-alliage, spécification, état de livraison, composition chimique.
Prix basé sur 3 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 5453 a été élaborée par le comité technique ISO/TC 132,
Ferro-alliages, et a été soumise aux comités membres en novembre 1979.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ France Roumanie
Allemagne, R. F. Inde Royaume-Uni
Italie
Australie Suéde
Autriche Japon Tchécoslovaquie
Brésil Norvége URSS
Canada Pologne USA
Chine Portugal Yougoslavie
Aucun comité membre ne l’a désapprouvée.
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 5453-1980 (F)
NORME INTERNATIONALE
Ferro-niobium - Spécifications et conditions de livraison
1 Objet et domaine d’application 5 Spécifications
La présente Norme internationale indique les spécifications et
5.1 Méthodes de constitution des livraisons
les conditions de livraison du ferro-niobium habituellement
fourni en aciérie et en fonderie.
Le ferro-niobium doit être fourni par livraisons constituées sui-
vant l’une des méthodes suivantes.
2 Références
Toiles métalliques et tôles perfo- 5.1.1 Méthode des lots par coulée
ISO 565, Tamis de contrôle -
rées - Dimensions nominales des ouvertures.
Une livraison constituée suivant cette méthode consiste en une
ISO 3713, Ferro-alliages - Échantillonnage et préparation des masse de ferro-niobium provenant d’une seule coulée (ou
échantillons - Règles générales. 1) d’une partie de coulée continue).
5.1.2 Méthode des lots par coulées regroupées par
3 Définition
nuance
ferro-niobium : Alliage mère de fer et de niobium ayant
3.1
Une livraison constituée suivant cette méthode consiste en un
une teneur en niobium minimale de 55,0 % et maximale de
certain nombre de coulées (ou de plusieurs parties de coulées
70,O % en masse, obtenu par réduction.
continues) d’un ferro-niobium d’une désignation donnée.
La teneur en niobium des coulées (ou des parties de coulées
4 Renseignements pour la commande
continues) constituant la livraison ne doit pas différer de l’une à
l’autre de plus de 3 % absolu.
Les commandes de ferro-niobium doivent comprendre les ren-
seignements suivants :
5.1.3 Méthode des lots par mélange de coulées
a) Quantité.
Une livraison constituée par la méthode des lots par mélange de
b) Méthodes de constitution des livraisons. coulées de même désignation consiste en un certain nombre de
coulées (ou de parties de coulées continues) d’un ferro-niobium
c) Composition chimique, conformément aux désigna- d’une désignation donnée, qui ont été concassées à une dimen-
sion granulométrique inférieure à 50 mm et qui ont été soigneu-
tions données dans le tableau 1.
sement homogénéisées.
d) Tranches granulométriques, conformément aux classes
La teneur en élément principal des coulées (ou parties de cou-
données dans le tableau 2.
lées continues), constituant la livraison, peut varier entre la
e) Spécifications pour les procès-verbaux d’analyse, limite minimale et la limite maximale spécifiées pour la désigna-
l’emballage, etc. tion appropriée du ferro-niobium.
1) Actuellement au stade de projet.

---------------------- Page: 3 ----------------------
IsO 5453-1980 (FI
d’autres méthodes d’échantillo nage donnant une fidélité sem-
5.2 Composition chimique
blable peuvent être utilisées.
5.2.1 La composition chimique du ferro-niobium doit être telle
que spécifiée dans le tableau 1. Les limites indiquées corres-
6.1.2 L’échantillonnage est habituellement effectué sur le lieu
pondent aux tranches granulométriques des classes 1 à 4 con-
de stockage du fournisseur, sauf accord contraire. Cependant,
formément au tableau 2.
quel que soit l’endroit où l’échantillonnage est effectué, des
représentants du fournisseur et de l’acheteur peuvent être pré-
sents.
5.2.2 Dans les compositions chimiques indiquées dans le
tableau 1, ne sont mentionnés que les éléments principaux et
les impuretés courantes. Si l’acheteur désire des intervalles de
6.1.3 Si un échantillonnage arbitral est nécessaire, il doit être
teneurs plus étroits pour l’élément principal et/ou des limites
effectué par un arbitre choisi par accord entre le fournisseur et
différentes pour les éléments spécifiés et/ou des limites pour
l’acheteur. L’échantillonnage doit être effectué par la méthode
les é
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWE~YHAPO~HAR OPTAHMSA~IMI ll0 CTAHjJAPTM3A~MM~RGANISATION INTERNATIONALE DE NORMALISATION
- Spécifications et conditions de livraison
Ferro-niobium
Ferroniobium - Specification and conditions of delivery
Première édition - 1980-12-01
Réf. no : ISO 54534980 (F)
CDU 669.1X293-198
Descripteurs : ferro-alliage, spécification, état de livraison, composition chimique.
Prix basé sur 3 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 5453 a été élaborée par le comité technique ISO/TC 132,
Ferro-alliages, et a été soumise aux comités membres en novembre 1979.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ France Roumanie
Allemagne, R. F. Inde Royaume-Uni
Italie
Australie Suéde
Autriche Japon Tchécoslovaquie
Brésil Norvége URSS
Canada Pologne USA
Chine Portugal Yougoslavie
Aucun comité membre ne l’a désapprouvée.
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 5453-1980 (F)
NORME INTERNATIONALE
Ferro-niobium - Spécifications et conditions de livraison
1 Objet et domaine d’application 5 Spécifications
La présente Norme internationale indique les spécifications et
5.1 Méthodes de constitution des livraisons
les conditions de livraison du ferro-niobium habituellement
fourni en aciérie et en fonderie.
Le ferro-niobium doit être fourni par livraisons constituées sui-
vant l’une des méthodes suivantes.
2 Références
Toiles métalliques et tôles perfo- 5.1.1 Méthode des lots par coulée
ISO 565, Tamis de contrôle -
rées - Dimensions nominales des ouvertures.
Une livraison constituée suivant cette méthode consiste en une
ISO 3713, Ferro-alliages - Échantillonnage et préparation des masse de ferro-niobium provenant d’une seule coulée (ou
échantillons - Règles générales. 1) d’une partie de coulée continue).
5.1.2 Méthode des lots par coulées regroupées par
3 Définition
nuance
ferro-niobium : Alliage mère de fer et de niobium ayant
3.1
Une livraison constituée suivant cette méthode consiste en un
une teneur en niobium minimale de 55,0 % et maximale de
certain nombre de coulées (ou de plusieurs parties de coulées
70,O % en masse, obtenu par réduction.
continues) d’un ferro-niobium d’une désignation donnée.
La teneur en niobium des coulées (ou des parties de coulées
4 Renseignements pour la commande
continues) constituant la livraison ne doit pas différer de l’une à
l’autre de plus de 3 % absolu.
Les commandes de ferro-niobium doivent comprendre les ren-
seignements suivants :
5.1.3 Méthode des lots par mélange de coulées
a) Quantité.
Une livraison constituée par la méthode des lots par mélange de
b) Méthodes de constitution des livraisons. coulées de même désignation consiste en un certain nombre de
coulées (ou de parties de coulées continues) d’un ferro-niobium
c) Composition chimique, conformément aux désigna- d’une désignation donnée, qui ont été concassées à une dimen-
sion granulométrique inférieure à 50 mm et qui ont été soigneu-
tions données dans le tableau 1.
sement homogénéisées.
d) Tranches granulométriques, conformément aux classes
La teneur en élément principal des coulées (ou parties de cou-
données dans le tableau 2.
lées continues), constituant la livraison, peut varier entre la
e) Spécifications pour les procès-verbaux d’analyse, limite minimale et la limite maximale spécifiées pour la désigna-
l’emballage, etc. tion appropriée du ferro-niobium.
1) Actuellement au stade de projet.

---------------------- Page: 3 ----------------------
IsO 5453-1980 (FI
d’autres méthodes d’échantillo nage donnant une fidélité sem-
5.2 Composition chimique
blable peuvent être utilisées.
5.2.1 La composition chimique du ferro-niobium doit être telle
que spécifiée dans le tableau 1. Les limites indiquées corres-
6.1.2 L’échantillonnage est habituellement effectué sur le lieu
pondent aux tranches granulométriques des classes 1 à 4 con-
de stockage du fournisseur, sauf accord contraire. Cependant,
formément au tableau 2.
quel que soit l’endroit où l’échantillonnage est effectué, des
représentants du fournisseur et de l’acheteur peuvent être pré-
sents.
5.2.2 Dans les compositions chimiques indiquées dans le
tableau 1, ne sont mentionnés que les éléments principaux et
les impuretés courantes. Si l’acheteur désire des intervalles de
6.1.3 Si un échantillonnage arbitral est nécessaire, il doit être
teneurs plus étroits pour l’élément principal et/ou des limites
effectué par un arbitre choisi par accord entre le fournisseur et
différentes pour les éléments spécifiés et/ou des limites pour
l’acheteur. L’échantillonnage doit être effectué par la méthode
les é
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.