SIST EN 62149-5:2004
(Main)Fibre optic active components and devices - Performance standards -- Part 5: ATM-PON transceivers with LD driver and CDR ICs
Fibre optic active components and devices - Performance standards -- Part 5: ATM-PON transceivers with LD driver and CDR ICs
Specifies standards on the transceiver modules for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the international telecommunication Union (ITU) in Recommendation TG.983.1.
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhaltensnormen -- Teil 5: ATM-PON Sende- und Empfangsmodule mit Laserdiodentreiberschaltungen und Takt- und Datenrückgewinnungs-ICs
Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement -- Partie 5: Emetteurs-récepteurs ATM-PON avec programme de gestion LD et ICs CDR
Spécifie les prescriptions applicables aux modules d'émetteurs-récepteurs pour les systèmes de réseau optique passif en mode de transfert asynchrone (ATM-PON) recommandées par l'Union Internationale de Télécommunication (UIT) dans la Recommandation UIT-T G.983.1.
Aktivne komponente in naprave optičnih vlaken – Izvedbeni standardi – 5. del: ATM-PON oddajniki in sprejemniki z lasersko diodnim pogonom in CDR ICs* (IEC 62149-5:2003)*
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 62149-5:2004
STANDARD
september 2004
Aktivne komponente in naprave optičnih vlaken – Izvedbeni standardi – 5. del:
ATM-PON oddajniki in sprejemniki z lasersko diodnim pogonom in CDR ICs*
(IEC 62149-5:2003)*
Fibre optic active components and devices - Performance standards - Part 5: ATM-
PON transceivers with LD driver and CDR ICs (IEC 62149-5:2003)
ICS 33.180.20 Referenčna številka
SIST EN 62149-5:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 62149-5
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2003
ICS 33.180.20
English version
Fibre optic active components and devices –
Performance standards
Part 5: ATM-PON transceivers with LD driver and CDR ICs
(IEC 62149-5:2003)
Composants et dispositifs actifs Aktive Lichtwellenleiterbauelemente
à fibres optiques – und -geräte –
Normes de fonctionnement Betriebsverhaltensnormen
Partie 5: Emetteurs-récepteurs ATM-PON Teil 5: ATM-PON Sende- und
avec programme de gestion LD Empfangsmodule mit Laserdioden-
et ICs CDR treiberschaltungen und Takt- und
(CEI 62149-5:2003) Datenrückgewinnungs-ICs
(IEC 62149-5:2003)
This European Standard was approved by CENELEC on 2003-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62149-5:2003 E
---------------------- Page: 2 ----------------------
EN 62149-5:2003 - 2 -
Foreword
The text of document 86C/544/FDIS, future edition 1 of IEC 62149-5, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 62149-5 on 2003-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-11-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A, B and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62149-5:2003 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60130 NOTE Harmonized in EN 60130 series (not modified).
IEC 60191 NOTE Harmonized in EN 60191 series (not modified).
IEC 60603 NOTE Harmonized in EN 60603 series (not modified).
IEC 60793 NOTE Harmonized in EN 60793 series (modified).
IEC 60794 NOTE Harmonized in EN 60794 series (modified).
IEC 60825 NOTE Harmonized in EN 60825 series (modified).
IEC 60874 NOTE Harmonized in EN 60874 series (not modified).
IEC 61076 NOTE Harmonized in EN 61076 series (not modified).
IEC 61280 NOTE Harmonized in EN 61280 series (not modified).
IEC 61281-1 NOTE Harmonized as EN 61281-1:1999 (not modified).
IEC 61754 NOTE Harmonized in EN 61754 series (modified).
IEC 62007-1 NOTE Harmonized as EN 62007-1:2000 (not modified).
IEC 62007-2 NOTE Harmonized as EN 62007-2:2000 (not modified).
IEC 62148-1 NOTE Harmonized as EN 62148-1:2002 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62149-5:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-6 - Environmental testing EN 60068-2-6 1995
Part 2: Tests - Test Fc: Vibration
(sinusoidal)
1) 2)
IEC 60068-2-27 - Part 2: Tests - Test Ea and guidance: EN 60068-2-27 1993
Shock
1) 2)
IEC 60825-1 - Safety of laser products EN 60825-1 1994
Part 1: Equipment classification,
requirements and user's guide
1) 2)
IEC 60950-1 - Information technology equipment - EN 60950-1 2001
(mod) Safety
Part 1: General requirements
1) 2)
IEC 61280-1-1 - Fibre optic communication subsystem EN 61280-1-1 1998
basic test procedures
Part 1-1: Test procedures for general
communication subsystems -
Transmitter output optical power
measurement for single-mode optical
fibre cable
1) 2)
IEC 61280-1-3 - Part 1-3: Test procedures for general EN 61280-1-3 1999
communication subsystems - Central
wavelength and spectral width
measurement
1) 2)
IEC 61280-2-2 - Part 2-2: Test procedures for digital EN 61280-2-2 1999
systems - Optical eye pattern,
waveform, and extinction ratio
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 4 ----------------------
EN 62149-5:2003 - 4 -
Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-17 2003 Part 2-17: Tests - Cold EN 61300-2-17 2003
1) 2)
IEC 61300-2-18 - Part 2-18: Tests - Dry heat - High EN 61300-2-18 1997
temperature endurance
1) 2)
IEC 61300-2-19 - Part 2-19: Tests - Damp heat (steady EN 61300-2-19 1997
state)
1) 2)
IEC 61300-2-22 - Part 2-22: Tests - Change of EN 61300-2-22 1997
temperature
IEC 61300-3-6 2003 Part 3-6: Examinations and EN 61300-3-6 2003
measurements - Return loss
1) 2)
IEC 61753-1-1 - Fibre optic interconnecting devices and EN 61753-1-1 2001
passive components performance
standard
Part 1-1: General and guidance -
Interconnecting devices (connectors)
1)
ITU-T - Broadband optical access systems - -
Recommendation based on Passive Optical Networks
G.983.1 (PON)
---------------------- Page: 5 ----------------------
NORME CEI
INTERNATIONALE IEC
62149-5
INTERNATIONAL
Première édition
STANDARD
First edition
2003-09
Composants et dispositifs actifs
à fibres optiques –
Normes de fonctionnement –
Partie 5:
Emetteurs-récepteurs ATM-PON
avec programme de gestion LD et ICs CDR
Fibre optic active components and devices –
Performance standards –
Part 5:
ATM-PON transceivers with LD driver
and CDR ICs
IEC 2003 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
y compris la photocopie et les photocopying and microfilm, without permission in writing from
électronique ou mécanique,
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
U
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 6 ----------------------
62149-5 © IEC:2003 – 3 –
CONTENTS
FOREWORD.7
INTRODUCTION.11
1 Scope.13
2 Normative references .13
3 Terms, definitions and abbreviations .15
3.1 Terms and definitions .15
3.2 Abbreviations .17
4 Classification.17
5 Product definition.17
5.1 Description of transceiver module.17
5.2 Description of applied form .19
5.3 Block diagram .19
5.4 Absolute limiting rating .23
5.5 Functional specification .25
6 Testing .41
6.1 Characterization testing.41
6.2 Performance testing .45
7 Environmental specifications .45
7.1 General safety.45
7.2 Laser safety.45
7.3 Electromagnetic emission.47
Annex A (normative) Measurement on tolerance to the reflected optical power
(Table 3, Parameter 13) .49
Annex B (normative) Logic level of alarm and shutdown signal .53
Bibliography.55
Figure 1 – Functional block diagram (example) .21
Figure 2 – Relationship of phase between clock and data signals .37
Figure 3 – Recommended electrical circuit diagram for TLVTTL-type interface (example) .39
Figure 4 – Schematic drawing for defining launched optical power without input
to transmitter .39
Figure 5 – Schematic drawing for defining the influence of signal reflection on
transmission characteristics .41
Figure A.1 – Model for incidence into ONU receiver .49
Figure A.2 – An example system to measure tolerance to the reflected optical power .51
Figure A.3 – A recommended system to measure tolerance to the reflected optical power .51
---------------------- Page: 7 ----------------------
62149-5 © IEC:2003 – 5 –
Table 1 – Absolute maximum ratings. 23
Table 2 – Operating environment . 25
Table 3 – Electrical and optical characteristics . 27
Table 4 – Electrical interface characteristics (PECL type). 33
Table 5 – Electrical interface characteristics (TLVTTL type) . 35
Table 6 – Electrical interface characteristics of alarm output voltage (TLVTTL type). 35
Table 7 – Electrical interface characteristics of alarm output voltage (LVCMOS type). 37
Table 8 – Electrical interface characteristics of shutdown input voltage (both PECL and
TLVTTL types) . 37
Table 9 – Transmitter section characterization tests . 43
Table 10 – Receiver section characterization tests . 43
Table 11 – Performance testing plan . 45
---------------------- Page: 8 ----------------------
62149-5 © IEC:2003 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –
Part 5: ATM-PON transceivers
with LD driver and CDR ICs
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to
technical committees; any IEC National Committee interested in the subject dealt with may participate in this
preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization
(ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62149-5 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86C/546/FDIS 86C/566/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 9 ----------------------
62149-5 © IEC:2003 – 9 –
This standard constitutes Part 5 of the IEC 62149 series, published under the general title
Fibre optic active components and devices – Performance standards. This series consists of
Part 1, devoted to general requirements, and various additional parts, specific to individual
module families.
Part 1: General and guidance
Part 2: Discrete vertical cavity surface emitting laser devices
Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters
Part 4: 1 300-nm transceivers for Gigabit Ethernet application
Part 5: ATM-PON transceivers with LD driver circuits and CDR ICs
Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers
The committee has decided that the contents of this publication will remain unchanged until
2008. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
---------------------- Page: 10 ----------------------
62149-5 © IEC:2003 – 11 –
INTRODUCTION
Fibre optic transceivers are used to convert electrical signals into optical signals and vice versa.
The optical performance criteria are generally well specified for a number of internationally
agreed applications areas such as ITU Recommendation TG.983.1 and IEEE 802.3. This
standard aims to assure inter-changeability in performance between fibre optic transceivers
for ATM-PON systems supplied by different manufacturers, but does not guarantee operation
between fibre optic transceivers.
Manufacturers using the standards are responsible for meeting the required performance
and/or reliability and quality assurance under a recognized scheme.
---------------------- Page: 11 ----------------------
62149-5 © IEC:2003 – 13 –
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –
Part 5: ATM-PON transceivers
with LD driver and CDR ICs
1 Scope
This part of IEC 62149 specifies standards on the transceiver modules for asynchronous-
transfer-mode passive optical network (ATM-PON) systems recommended by the International
Telecommunication Union (ITU) in Recommendation TG.983.1.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60068-2-6, Environmental testing – Part 2: Tests – Test Fc: Vibration (sinusoidal)
IEC 60068-2-27, Basic environmental testing procedures – Part 2: Tests – Test Ea and
guidance: Shock
IEC 60825-1, Safety of laser products – Part 1: Equipment classification, requirements and
user’s guide
IEC 60950-1, Information technology equipment – Safety – Part 1: General requirements
IEC 61280-1-1, Fibre optic communication subsystem basic test procedures – Part 1-1: Test
procedures for general communication subsystems – Transmitter output optical power
measurement for single-mode optical fibre cable
IEC 61280-1-3, Fibre optic communication subsystem basic test procedures – Part 1-3: Test
procedures for general communication subsystems – Central wavelength and spectral width
measurement
IEC 61280-2-2, Fibre optic communication subsystem basic test procedures – Part 2-2: Test
procedures for digital systems – Optical eye pattern, waveform, and extinction ratio
IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-4: Tests – Fibre/cable retention
IEC 61300-2-17:2003, Fibre optic interconnecting devices and passive components – Basic
test and measurement procedures – Part 2-17: Tests – Cold
---------------------- Page: 12 ----------------------
62149-5 © IEC:2003 – 15 –
IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-18: Tests – Dry heat – High temperature endurance
IEC 61300-2-19, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-19: Tests – Damp heat (steady state)
IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-22: Tests – Change of temperature
IEC 61300-3-6:2003, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 3-6: Examinations and measurements – Return loss
IEC 61753-1-1, Fibre optic interconnecting devices and passive components performance
standard – Part 1-1: General and guidance – Interconnecting devices (connectors)
ITU Recommendation T G.983.1: Broadband optical access systems based on Passive
Optical Networks (PON)
3 Terms, definitions and abbreviations
For the purposes of this part of IEC 62149, the following definitions apply.
Further terminology concerning related physical concepts, types of devices, general terms,
and terms related to ratings and characteristics can be found in IEC 61931.
It is also recommended to refer to ITU Recommendation T G.983.1.
3.1 Terms and definitions
3.1.1
OAN (optical access network)
set of access links sharing the same network-side interfaces and supported by optical access
transmission systems. The OAN may include a number of ODNs connected to the same OLT
3.1.2
ODN (optical distribution network)
apparatus or component that provides the optical transmission means from the OLT to the
users, and vice versa. It utilizes passive optical components
3.1.3
OLT (optical line termination)
apparatus that provides the network-side interface of the OAN and is connected to one or
more ODNs
3.1.4
ONU (optical network unit)
apparatus that provides (directly or remotely) the user-side interface of the OAN and is
connected to the ODN
---------------------- Page: 13 ----------------------
62149-5 © IEC:2003 – 17 –
3.2 Abbreviations
ATM-PON Asynchronous transfer mode passive optical network
ATT Attenuator
BER Bit error ratio
CDR Clock and data recovery
DUT Device under test
ERD Error ratio detector
EX Extinction ratio
FTT Cab/C/B/H Fibre to the cabinet/curb/building/home
IC Integrated circuit
LD Laser diode
MLM Multi-longitudinal mode
PPG Pulse pattern generator
RMS Root mean square
SLM Single-longitudinal modes
WDM Wavelength division multiplexing
4 Classification
This part of IEC 62149 specifies the performance of optical transceivers with laser diode (LD)
driver circuits and clock and data recovery (CDR) ICs.
Fibre optic transceiver modules are classified into 5 types of forms according to the
combination of mating types of electrical and optical interfaces (for details see IEC 62148-1).
These include the following:
Type 1: Fibre optic connector interface with direct solderable type electrical terminals.
Type 2: Fibre optic connector interface with plug-in type electrical terminals.
Type 3: Fibre optic pigtail interface with direct solderable type electrical terminals.
Type 4: Fibre optic pigtail interface with plug-in type electrical terminals.
Type 5: Modules not classified into type 1 – type 4. (A typical example is a module that has
both electrical connectors and non-connector type terminals as an electrical
interface such as a coaxial connector for signal and lead terminals for the power
supply.)
5 Product definition
5.1 Description of transceiver module
Information on the following devices constituting the optical transceiver module shall be
stated. This statement shall include details of technologies. For example, technologies used
for ICs such as CMOS, bipolar, etc., shall be described.
---------------------- Page: 14 ----------------------
62149-5 © IEC:2003 – 19 –
• For a transmitter:
– laser diode (in this description, a single- or a multi-longitudinal mode type shall be
specified);
– monitoring photodiode;
– driver IC;
– thermal sensor (where appropriate).
• For a receiver:
– photodiode;
– pre-amp IC;
– data/clock recovery IC.
• For a WDM device:
– technology used for this device.
• For a package:
– refer to the IEC document number standardized as a package interface standard.
5.2 Description of applied form
According to ITU Recommendation T G.983.1, applied form of nominal bit rate, class (class B
or class C), applied unit (ONU or OLT), and the number of fibres (one for duplex working or
two for simplex working) shall be stated.
5.3 Block diagram
Block diagram or equivalent circuit information on the optical transceiver module shall be
given.
The following terminals may be distinguished:
• supply terminals, i.e., terminals intended to be connected to the power supplies;
• input and output terminals, i.e., terminals into or out of which signals are passed.
The term “signal” includes both pulse and more complex waveforms, and includes strobe or
control pulses.
---------------------- Page: 15 ----------------------
62149-5 © IEC:2003 – 21 –
Power Optical
supply input/output
Data input Data output
Clock output
Clock input
Bias control
(where
appropriate)
Shutdown Alarm
Earth
Figure 1 – Functional block diagram (example)
---------------------- Page: 16 ----------------------
62149-5 © IEC:2003 – 23 –
5.4 Absolute limiting rating
Absolute limiting (maximum) ratings imply that no catastrophic damage will occur if the
product is subjected to these ratings for short periods, provided each limiting parameter is in
isolation and all other parameters have values within the normal performance parameters. It
should not be assumed that limiting values of more than one parameter could be applied at
any one time.
Table 1 – Absolute maximum ratings
Requirements
Letter
Parameter Condition Units
symbol
Min. Max.
a
Storage temperature T –40 85 °C
stg
Storage humidity H 595 %
stg
Bend radius of pigtail for type 5 only (at
r 30 mm
specified distance from the case)
Pulse cycle:
b 2
Shock 18 ms 300 m/s
3 times/axis
10-55Hz, 3 axes,
c 2
Vibration 100 m/s
1,5 mm, 2 h
Tensile force on devices with pigtail
d
Buffer-coated fibre 5
F N
d
Reinforced fibre 100
Electrical limiting values
– Power supply voltage V –0,5 4,0 V
SUPmax
– Input voltage V –0,5 V V
INmax sup
– Output voltage V 0 V +0,5 V
OUTmax sup
– Output current
PECL interface I 0 50 mA
OUTmax
TLVTTL interface –20 20
Optical limiting values
– Permissible input power P –5 dBm
in
a
Ambient temperature and humidity for outdoor ONU is under further study in ITU Recommendation T
G.983.1, thus these specifications may be varied in the future.
b
IEC 60068-2-27 shall be referred to for detail.
c
IEC 60068-2-6 shall be referred to for detail.
d
For requirements see IEC 61753-1-1.
---------------------- Page: 17 ----------------------
62149-5 © IEC:2003 – 25 –
5.5 Functional specification
Electro-optical characteristics as for the parameters in Table 3 shall be satisfied at the
operating environmental conditions specified in Table 2. It should be noted that optical
characteristics specified in ITU Recommendation T G.983.1 shall be satisfied.
Each electrical and optical characteristic of this clause shall be measured under conditions
specified in each reference.
Each electrical and optical characteristic of this clause shall be stated under specified worst-
case conditions, with respect to the recommended range of operating conditions as stated.
The measuring method of each electrical and optical characteristic of the clause shall be
measured based on
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.