Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed asphalt

This European Standard specifies a visual method of determining the amount and components of coarse foreign matter in reclaimed asphalt. A method for determining the amount and components of finer foreign matter in reclaimed asphalt is given in Annex A. This method does not completely categorise the foreign matter that can occur in asphalt.
NOTE 1   For the use of reclaimed asphalt in asphalt mixtures, it is important to know the components in the reclaimed asphalt and to what extent coarse foreign matter is present that can influence the properties of the asphalt mix.
NOTE 2   The method is not intended to categorise all foreign materials but rather to ensure that the amount of coarse foreign materials are minimised.

Asphalt - Prüfverfahren - Teil 42: Menge der Fremdpartikel in Ausbauasphalt

Dieses Dokument legt ein Sichtprüfverfahren zur Bestimmung des Gehalts an groben Fremdstoffen und deren Bestandteile in Ausbauasphalt fest. Ein Verfahren zur Bestimmung des Gehalts an feineren Fremdstoffen in Ausbauasphalt und deren Bestandteile wird in Anhang A angegeben. Dieses Verfahren ist nicht dazu geeignet, die Fremdstoffe, die in Ausbauasphalt enthalten sein können, vollständig zu klassifizieren.
ANMERKUNG Für die Verwendung von Ausbauasphalt in Asphalten ist es wichtig zu wissen, welche Bestandteile im Ausbauasphalt enthalten sind, und die Mengenanteile der groben Fremdstoffe zu kennen, die die Eigenschaften des Asphalts beeinflussen können.

Mélanges bitumineux - Méthodes d'essai - Partie 42 : Quantité de matériaux étrangers présents dans les agrégats d'enrobés

Ce document spécifie une méthode visuelle permettant de déterminer la quantité et les composants de matériaux étrangers grossiers dans les agrégats d'enrobés. Une méthode visant à déterminer la quantité et les composants de matériaux étrangers fins dans les agrégats d'enrobés est fournie à l'Annexe A. Cette méthode ne permet pas de classer en catégories la totalité des matériaux étrangers susceptibles d'être présents dans les agrégats d’enrobés.
NOTE En vue de l'utilisation d'agrégats d'enrobés dans les mélanges bitumineux, il est important de connaître les composants de ces agrégats et de savoir dans quelle proportion sont présents les matériaux étrangers grossiers qui peuvent influer sur les propriétés du mélange bitumineux.

Bitumenske zmesi - Preskusne metode - 42. del: Vsebnost nečistoč v asfaltnem granulatu

General Information

Status
Published
Public Enquiry End Date
19-Oct-2019
Publication Date
10-Feb-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-Jan-2021
Due Date
05-Apr-2021
Completion Date
11-Feb-2021

Relations

Buy Standard

Standard
EN 12697-42:2021
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 12697-42:2019
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12697-42:2021
01-marec-2021
Nadomešča:
SIST EN 12697-42:2013
Bitumenske zmesi - Preskusne metode - 42. del: Vsebnost nečistoč v asfaltnem
granulatu
Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed
asphalt
Asphalt - Prüfverfahren - Teil 42: Menge der Fremdpartikel in Ausbauasphalt
Mélanges bitumineux - Méthodes d'essai - Partie 42 : Quantité de matériaux étrangers
présents dans les agrégats d'enrobés
Ta slovenski standard je istoveten z: EN 12697-42:2021
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 12697-42:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12697-42:2021

---------------------- Page: 2 ----------------------
SIST EN 12697-42:2021


EN 12697-42
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2021
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 12697-42:2012
English Version

Bituminous mixtures - Test methods - Part 42: Amount of
foreign matter in reclaimed asphalt
Mélanges bitumineux - Méthodes d'essai - Partie 42 : Asphalt - Prüfverfahren - Teil 42: Menge der
Quantité de matériaux étrangers présents dans les Fremdpartikel in Ausbauasphalt
agrégats d'enrobés
This European Standard was approved by CEN on 13 December 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-42:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12697-42:2021
EN 12697-42:2021 (E)
Content                                                            Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 6
5 Apparatus . 6
6 Preparation of the sample . 6
7 Procedure . 6
8 Expression of results . 7
9 Test report . 7
10 Precision data . 8
Annex A (informative) Amount of finer foreign matter . 9

2

---------------------- Page: 4 ----------------------
SIST EN 12697-42:2021
EN 12697-42:2021 (E)
European foreword
This document (EN 12697-42:2021) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2021, and conflicting national standards shall
be withdrawn at the latest by July 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12697-42:2012.
The main changes compared to the previous edition are listed below:
— The title no longer refers to hot mix asphalt;
th
— (Clause 1) paragraph, 4 line: “asphalt” amended to read “reclaimed asphalt”;
— (Clause 1) NOTE: The wording “asphalt mixtures” and “asphalt mix” amended to read
“bituminous mixtures” and “bituminous mixture”;
— (Clause 1) NOTE 2 deleted since already described in Scope;
— (ge) NOTES adjusted according to CEN/CENELEC Internal Regulations Part 3:2019;
— (ge) for measurement and expression of results the wording “accuracy” has been amended to “to
the nearest”;
— (Clause 2) dated reference to EN 932-1 deleted and title corrected for EN 12697-27;
— (Clause 3) introductory sentence amended according to CEN/CENELEC Internal Regulations
Part 3:2019 and dated reference to EN 931-1 deleted;
— (3.1) definition of reclaimed asphalt harmonized with EN 13108-8:2016;
— (3.2) cold asphalt with cut-back bitumen excluded from the definition;
— (3.3) additional definition for finer foreign matter introduced. Transferred from Annex A, A.2.
(cold asphalt with cut-back bitumen excluded). The following clauses renumbered accordingly;
— (5.2) reworded description for balance (editorial) in line with 7.2;
— (7.1) NOTE 1 regarding cold asphalt with cut-back bitumen deleted since there is no relevance
with the purpose of this test method; NOTE 2 deleted;
— (7.2) NOTE 1 adjusted to normal text (new sub-clause 7.2.1). NOTE 2 adjusted to normal text
(new sub-clause 7.2.2);
— (7.3); (7.4); (7.5); (8) simplified description with reference to 7.2;
— (Clause 9) required information completed according to CEN/CENELEC Internal Regulations
Part 3:2019, Clause 18.5.8. Report of test result in line with EN 13108-8:2016, 4.1;
3

---------------------- Page: 5 ----------------------
SIST EN 12697-42:2021
EN 12697-42:2021 (E)
— (Annex A) title of Annex A amended to read “Amount of finer foreign matter” and the wording
“finer foreign matter” implemented where relevant in line with definition in 3.3;
WARNING — The methods described in this document require the use of solvents that are hazardous
to health and are subject to occupational exposure limits as described in relevant legislation and
regulations. Exposure levels are related to both handling procedures and ventilation provision and
it is emphasized that adequate training is expected to be given to staff employed in the
usage of these substances.
A list of all parts in the EN 12697 series can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
4

---------------------- Page: 6 ----------------------
SIST EN 12697-42:2021
EN 12697-42:2021 (E)
1 Scope
This document specifies a visual method of determining the amount and components of coarse
foreign matter in reclaimed asphalt. A method for determining the amount and components of finer
foreign matter in reclaimed asphalt is given in Annex A. This method does not completely categorize
the foreign matter that can occur in reclaimed asphalt.
NOTE For the use of reclaimed asphalt in bituminous mixtures it is important to know the components in
the reclaimed asphalt and to know to what extent coarse foreign matter is present that can influence the
properties of the bituminous mixture.
2 Normative references
The following documents are referred to in the
...

SLOVENSKI STANDARD
oSIST prEN 12697-42:2019
01-oktober-2019
Bitumenske zmesi - Preskusne metode - 42. del: Vsebnost nečistoč v asfaltnem
granulatu
Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed
asphalt
Asphalt - Prüfverfahren für Heißasphalt - Teil 42: Fremdstoffgehalt in Ausbauasphalt
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie
42: Quantité de matériaux étrangers présents dans les agrégats d'enrobés
Ta slovenski standard je istoveten z: prEN 12697-42
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 12697-42:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12697-42:2019

---------------------- Page: 2 ----------------------
oSIST prEN 12697-42:2019


DRAFT
EUROPEAN STANDARD
prEN 12697-42
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2019
ICS 93.080.20 Will supersede EN 12697-42:2012
English Version

Bituminous mixtures - Test methods - Part 42: Amount of
foreign matter in reclaimed asphalt
Mélanges bitumineux - Méthodes d'essai pour mélange Asphalt - Prüfverfahren für Heißasphalt - Teil 42:
hydrocarboné à chaud - Partie 42: Quantité de Fremdstoffgehalt in Ausbauasphalt
matériaux étrangers présents dans les agrégats
d'enrobés
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12697-42:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12697-42:2019
prEN 12697-42:2019 (E)
Content Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 5
5 Apparatus . 5
6 Preparation of the sample . 5
7 Procedure. 6
8 Expression of results . 7
9 Test report . 7
10 Precision data . 7
Annex A (informative) Amount of foreign matter in finer fractions . 8
A.1 General . 8
A.2 Apparatus . 8
A.3 Preparation of the sample . 8
A.4 Procedure. 9
A.5 Expression of results . 9
A.6 Test report . 9

2

---------------------- Page: 4 ----------------------
oSIST prEN 12697-42:2019
prEN 12697-42:2019 (E)
European foreword
This document (prEN 12697-42:2019) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12697-42:2012.
The main technical changes with respect to EN 12697-42:2012 are listed below:
— (Title) No longer exclusively for hot mix asphalt;
— (ge) NOTES adjusted according to ISO/IEC Directives – Part 2:2016, 24.5;
— (2) Dated reference to EN 932-1 deleted and title corrected for EN 12697-27;
— (3) Introductory sentence amended according to CEN/CENELEC Internal Regulations Part 3:2017
and dated reference to EN 931-1 deleted;
— (3.1) Definition of reclaimed asphalt harmonized with EN 13108-8:2016;
— (3.3) Additional definition for finer foreign matter in Annex A, clause A.2 transferred to 3.3. The
following clauses renumbered accordingly.
WARNING — The methods described in this document require the use of solvents that are hazardous to
health and are subject to occupational exposure limits as described in relevant legislation and
regulations. Exposure levels are related to both handling procedures and ventilation provision and it is
emphasized that adequate training should be given to staff employed in the usage of these substances.
A list of all parts in the EN 12697 series can be found on the CEN website.
3

---------------------- Page: 5 ----------------------
oSIST prEN 12697-42:2019
prEN 12697-42:2019 (E)
1 Scope
This document specifies a visual method of determining the amount and components of coarse foreign
matter in reclaimed asphalt. A method for determining the amount and components of finer foreign
matter in reclaimed asphalt is given in Annex A. This method does not completely categorize the foreign
matter that can occur in asphalt.
NOTE 1 For the use of reclaimed asphalt in asphalt mixtures, it is important to know the components in the
reclaimed asphalt and to what extent coarse foreign matter is present that can influence the properties of the
asphalt mix.
NOTE 2 The method is not intended to categorize all foreign materials but rather to ensure that the amount of
coarse foreign materials are minimized.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 932-1, Test for general properties of aggregates — Part 1: Methods for sampling
EN 933-2, Test for geometrical properties of aggregates — Part 2: Determination of particle size
distribution — Test sieves, nominal size of apertures
EN 12697-27, Bituminous mixtures — Test methods — Part 27: Sampling
3 Terms and definitions
For the purposes of this document, the terms and definitions in EN 932-1 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.el
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.