Metal chrome -- Specification and conditions of delivery

Specifies requirements and conditions of delivery for metal chrome usually supplied for alloying special steels and alloys.

Chrome métallique -- Spécifications et conditions de livraison

Kovinski krom - Specifikacija in dobavni pogoji

General Information

Status
Published
Publication Date
31-Mar-2000
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-2000
Due Date
01-Apr-2000
Completion Date
01-Apr-2000

Buy Standard

Standard
ISO 10387:1994 - Metal chrome -- Specification and conditions of delivery
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 10387:2000
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 10387:1994 - Chrome métallique -- Spécifications et conditions de livraison
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 10387:1994 - Chrome métallique -- Spécifications et conditions de livraison
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10387
First edition
1994-09-0 1
- Specification and
Metal chrome
conditions of delivery
- Spbifications et conditions de livraison
Chrome m6 tallique
Reference number
ISO 10387:1994(E)

---------------------- Page: 1 ----------------------
ISO 10387:1994(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10387 was prepared by Technical Committee
lSO/TC 132, Ferroalloys.
ISO 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD o ISO ISO 10387:1994(E)
- Specification and conditions of delivery
Metal chrome
ISO 8954-1: 1990, Ferroalloys - Vocabulary - Part 7:
1 Scope
Materials.
This International Standard specifies requirements
and conditions of delivery for metal chrome usually
supplied for alloying special steels and alloys.
3 Definitions
For the purposes of this International Standard, the
2 Normative references
following definition and those in ISO 8954-1 apply.
The following Standards contain provisions which,
3.1 metal chrome: An alloying material with a
through reference in this text, constitute provisions of
minimum chrome content of 98 % by mass obtained
this International Standard. At the time of publication,
by reduction or an electrolytic method.
the editions indicated were valid. All Standards are
subject to revision, and Parties to agreements based
on this International Standard are encouraged to
investigate the possibility of applying the most recent
4 Information for ordering
editions of the Standards indicated below. Members
of IEC and ISO maintain registers of currently valid
Orders for metal chrome shall include the following
International Standards.
information:
ISO 565:1990, Test sieves - Metal wir-e cloth,
a) quantity;
perforated metal plate and electroformed sheet -
b) constitution of consignment;
Nominal sizes of openings.
c) Chemical composition, in accordance with the
ISO 3713:1987, Ferroalloys - Sampling and
designations given in table 1;
preparation of samples - General rules.
Table 1 - Chemical composition
Chemical composition, % (~IIZ)
I 1
Designationl) Cr Si Al Fe C S P Cu As Bi Sb Zn Pb Sn N
02 H2
min. max. max. max. max. max. max. max. max. max. max. max. max. max. max. max. max.
II 3 1
RECr99,6 99,6 0,04 0,Ol 0,35 0,05 0,010 0,005 0,005 0,05 0,001
ECr99,2 99,2 0,Ol 0,005 0,20 0,02 0,030 0,005 0,005 0,005 0,005 0,005 0,001 0,lO
RACr99 99,0 0,Ol 0,o-l 0,Ol 0,005 0,005 0,002 0,005 0,004
61 0,3 0,3
0,02 0,02 0,Ol 0,Ol 0,008 0,Ol
ACr98,5 98,5 0,03 0,006
013 03 0,5
ACr98 98,0 0,05 0,04 0,03 0,04
0,5 0,7 03
NOTE - Metal chrome of ECr grade may be supplied in degassed form with the gas content not more than: 0,02 N, 0,05 O2 and 0,001 Hz.
I
1) E: electrolytic
A: aluminothermic
R: refined
1

---------------------- Page: 3 ----------------------
ISO 10387:1994(E) 0 ISO
d) particle size t-anges in accordance with the 5.2.2 The Chemical compositions given in table 1
classes given in table 2; show only the main constituent elements and usual
impurities. If the purchaser requires closer ranges for
e) necessary requirements for analysis reports,
the main element contents and/or different Iimits for
packing, etc., as appropriate.
specified elements and/or Iimits for non-specified
elements, this shall be agreed upon between the
supplier and purchaser.
Table 2 - Particle size range
5.2.3 The Chemical compositions given in table 1
Particle
depend on the precision of the methods of sampling
size Undersize Oversize
Class
and analysis for metal chrome (see clause 6).
range
mm % (dnt) max. % (dm) max.
1 IO to 100 10 IO
5.3 Particle size ranges
2 2 to 50 10 No piece to exceed
5.3.1 Metal chrome shall be supplied in lumps or as
1,15 times the maxi-
10
3 2 to 20
crushed and screened particles. The particle size
mum limit of the
ranges and tolerantes shall be in accordance with
size range specified
table 2. The undersize values shall be valid at the
in two or three
Point of delivery to the purchaser?
directions
5
4 <2 The particle sizes specified refer to screening on a
steel sieve with Square openings (see ISO 565).
5.3.2 If the purchaser requires particle size ranges
and/or tolerantes other than those given in table 2,
5 Requirements
these shall be agreed upon between the supplie
...

SLOVENSKI STANDARD
SIST ISO 10387:2000
01-april-2000
Kovinski krom - Specifikacija in dobavni pogoji
Metal chrome -- Specification and conditions of delivery
Chrome métallique -- Spécifications et conditions de livraison
Ta slovenski standard je istoveten z: ISO 10387:1994
ICS:
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
SIST ISO 10387:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 10387:2000

---------------------- Page: 2 ----------------------

SIST ISO 10387:2000
INTERNATIONAL ISO
STANDARD 10387
First edition
1994-09-0 1
- Specification and
Metal chrome
conditions of delivery
- Spbifications et conditions de livraison
Chrome m6 tallique
Reference number
ISO 10387:1994(E)

---------------------- Page: 3 ----------------------

SIST ISO 10387:2000
ISO 10387:1994(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10387 was prepared by Technical Committee
lSO/TC 132, Ferroalloys.
ISO 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 10387:2000
INTERNATIONAL STANDARD o ISO ISO 10387:1994(E)
- Specification and conditions of delivery
Metal chrome
ISO 8954-1: 1990, Ferroalloys - Vocabulary - Part 7:
1 Scope
Materials.
This International Standard specifies requirements
and conditions of delivery for metal chrome usually
supplied for alloying special steels and alloys.
3 Definitions
For the purposes of this International Standard, the
2 Normative references
following definition and those in ISO 8954-1 apply.
The following Standards contain provisions which,
3.1 metal chrome: An alloying material with a
through reference in this text, constitute provisions of
minimum chrome content of 98 % by mass obtained
this International Standard. At the time of publication,
by reduction or an electrolytic method.
the editions indicated were valid. All Standards are
subject to revision, and Parties to agreements based
on this International Standard are encouraged to
investigate the possibility of applying the most recent
4 Information for ordering
editions of the Standards indicated below. Members
of IEC and ISO maintain registers of currently valid
Orders for metal chrome shall include the following
International Standards.
information:
ISO 565:1990, Test sieves - Metal wir-e cloth,
a) quantity;
perforated metal plate and electroformed sheet -
b) constitution of consignment;
Nominal sizes of openings.
c) Chemical composition, in accordance with the
ISO 3713:1987, Ferroalloys - Sampling and
designations given in table 1;
preparation of samples - General rules.
Table 1 - Chemical composition
Chemical composition, % (~IIZ)
I 1
Designationl) Cr Si Al Fe C S P Cu As Bi Sb Zn Pb Sn N
02 H2
min. max. max. max. max. max. max. max. max. max. max. max. max. max. max. max. max.
II 3 1
RECr99,6 99,6 0,04 0,Ol 0,35 0,05 0,010 0,005 0,005 0,05 0,001
ECr99,2 99,2 0,Ol 0,005 0,20 0,02 0,030 0,005 0,005 0,005 0,005 0,005 0,001 0,lO
RACr99 99,0 0,Ol 0,o-l 0,Ol 0,005 0,005 0,002 0,005 0,004
61 0,3 0,3
0,02 0,02 0,Ol 0,Ol 0,008 0,Ol
ACr98,5 98,5 0,03 0,006
013 03 0,5
ACr98 98,0 0,05 0,04 0,03 0,04
0,5 0,7 03
NOTE - Metal chrome of ECr grade may be supplied in degassed form with the gas content not more than: 0,02 N, 0,05 O2 and 0,001 Hz.
I
1) E: electrolytic
A: aluminothermic
R: refined
1

---------------------- Page: 5 ----------------------

SIST ISO 10387:2000
ISO 10387:1994(E) 0 ISO
d) particle size t-anges in accordance with the 5.2.2 The Chemical compositions given in table 1
classes given in table 2; show only the main constituent elements and usual
impurities. If the purchaser requires closer ranges for
e) necessary requirements for analysis reports,
the main element contents and/or different Iimits for
packing, etc., as appropriate.
specified elements and/or Iimits for non-specified
elements, this shall be agreed upon between the
supplier and purchaser.
Table 2 - Particle size range
5.2.3 The Chemical compositions given in table 1
Particle
depend on the precision of the methods of sampling
size Undersize Oversize
Class
and analysis for metal chrome (see clause 6).
range
mm % (dnt) max. % (dm) max.
1 IO to 100 10 IO
5.3 Particle size ranges
2 2 to 50 10 No piece to exceed
5.3.1 Metal chrome shall be supplied in lumps or as
1,15 times the maxi-
10
...

NORME
ISO
INTERNATIONALE
10387
Première édition
1994-09-O 1
Chrome métallique - Spécifications et
conditions de livraison
Metal chrome - Specification and conditions of delivery
Numéro de référence
ISO 10387: 1994(F)

---------------------- Page: 1 ----------------------
ISO 10387:1994(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres de
I’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de I’ISO. Chaque comité membre intéressé par une
étude a le droit de faire partie du comité technique créé à cet effet. Les
organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO participent également aux travaux. L’ISO
collabore étroitement avec la Commission électrotechnique internationale
(CEI) en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 10387 a été élaborée par le comité technique
lSO/TC 132, Ferro-alliages.
0 60 1994
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication
ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé,
électronique ou mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de
l’éditeur.
Organisation internationale de normalisation
Case postale 56 l CH-l 211 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE o ISO ISO 10387:1994(F)
Spécifications et conditions de livraison
Chrome métallique -
I SO 37 13: 1987, Ferro-alliages - Échantillonnage et
1 Domaine d’application
préparation des échan tiiions - Règles générales.
La présente Norme internationale établit les spéci-
ISO 8954-1: 1990, Ferra-alliages - Vocabulaire -
fications et les conditions de livraison du chrome
Partie 1: Matériaux.
métallique habituellement fourni pour allier les aciers
spéciaux et les alliages.
3 Définitions
i
Pour les besoins de la présente Norme internationale,
2 Références normatives
la définition suivante et celles contenues dans
I’ISO 8954-l s’appliquent.
Les normes suivantes contiennent des dispositions
3.1 chrome métallique: Matériau à allier ayant une
qui, par suite de la référence qui en est faite,
teneur en chrome minimale de 98 % en masse,
constituent des dispositions valables pour la présente
Norme internationale. Au moment de la publication, obtenu par réduction ou par méthode électrolytique.
les éditions indiquées étaient en vigueur. Toute
norme est sujette à révision et les parties prenantes
des accords fondés sur la présente Norme interna-
4 Renseignements pour la commande
tionale sont invitées à rechercher la possibilité
d’appliquer les éditions les plus récentes des normes
Les commandes de chrome métallique doivent
indiquées ci-après. Les membres de la CEI et de I’ISO
comprendre les renseignements suivants:
possèdent le registre des Normes internationales en
vigueur à un moment donné. a) quantité;
b) constitution des livraisons;
I SO 565: 1990, Tamis de contrôle - Tissus métal-
liques, tôles métalliques perforées et feuilles électro- c) composition chimique, conformément aux dési-
formées - Dimensions nominales des ouvertures. gnations données dans le tableau 1;
Tableau 1 - Composition chimique
Composition chimique, % (WLJIZ)
Si Al S P CU As Bi Sb Zn Pb Sn N
Désignationl) Cr
02 H2
max. max. max. max. max.
min. max. max. max. max. max. max. max. max. max.
0,010 0,005 0,005 - - - 0,001 0,02 0,05
RECr99,6 99,6 0,04 0,35 0,05
ECr99,2 99,2 0,Ol 0,20 0,02 0,030 0,005 0,005 0,005 0,003 0,005 0,005 0,003 0,001 0,03 0,55
99,0 0,3 0,Ol 0,Ol 0,Ol 0,005 0,005 0,000 5 0,002 0,005 0,005 0,004 0,Ol
RACr99
0’1
0,02 0,02 0,Ol 0,Ol 0,001 0,OOE 0,Ol 0,001 0,ooc 0,05
ACr98,5 98,5 0,5 0,03
0,3
ACr98 98,0 0,8 0,05 0,04 0,03 0,04 - - -
0,5
NOTE - Le chrome métallique de la nuance ECr peut être fourni sous la forme dégazée ayant une teneur en gaz maximale de: 0,02 N,
0,05 O2 et 0,001 HZ.
1) E: électrolytique
A: aluminothermique
R: raffiné

---------------------- Page: 3 ----------------------
ISO 10387:1994(F) 0 ISO
d) tranches granulométriques, conformément aux 5.22 Dans les compositions chimiques indiquées
désignations données dans le tableau 2; dans le tableau 1, ne sont mentionnés que les
éléments principaux et les impuretés courantes. Si
e) spécifications pour les procès-verbaux d’analyse,
l’acheteur désire des intervalles de teneurs plus
l’emballage, etc.
étroits pour les éléments principaux et/ou des limites
différentes pour les éléments spécifiés et/ou des
Tableau 2 - Dimensions granulométriques
limites pour les éléments non spécifiés, cela doit faire
l’objet d’un accord entre le fournisseur et l’acheteur.
Tranche
granulo- Tamisat Refus
Classe 5.2.3 Les compositions chimiques données dans le
métrique
tableau 1 dépendent de la fidélité des méthodes
mm % (dm) max. % (dm) max.
d’échantillonnage. et d’analyse du chrome métallique
(voir article 6).
1 IOà 100 10 10
2 2 à 50 10 Aucun morceau
n’excéde 1,15 fois
5.3 Tranches granulométriques
3 2 à 20 10
la limite supérieure
de la tranche gra-
5.3.1 Le chrome métallique doit être fourni en
nulométrique spé-
morceaux ou en particules concassées et tamisées.
cifiée dans deux
Les tranches granulométriques et les tolérances
ou trois directions
doivent être conformes à celles indiquées dans le
tableau 2. Les valeurs de tamisat doivent être
4 5
<2
valables au point de livraison à l’acheteur?
Les dimensions granulométriques spécifiées sont
5 Spécifications
déterminées par tamisage sur un tamis en acier à
ouvertures carrées (voir I’ISO 565).
5.1 Constitution des liv
...

NORME
ISO
INTERNATIONALE
10387
Première édition
1994-09-O 1
Chrome métallique - Spécifications et
conditions de livraison
Metal chrome - Specification and conditions of delivery
Numéro de référence
ISO 10387: 1994(F)

---------------------- Page: 1 ----------------------
ISO 10387:1994(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres de
I’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de I’ISO. Chaque comité membre intéressé par une
étude a le droit de faire partie du comité technique créé à cet effet. Les
organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO participent également aux travaux. L’ISO
collabore étroitement avec la Commission électrotechnique internationale
(CEI) en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 10387 a été élaborée par le comité technique
lSO/TC 132, Ferro-alliages.
0 60 1994
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication
ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé,
électronique ou mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de
l’éditeur.
Organisation internationale de normalisation
Case postale 56 l CH-l 211 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE o ISO ISO 10387:1994(F)
Spécifications et conditions de livraison
Chrome métallique -
I SO 37 13: 1987, Ferro-alliages - Échantillonnage et
1 Domaine d’application
préparation des échan tiiions - Règles générales.
La présente Norme internationale établit les spéci-
ISO 8954-1: 1990, Ferra-alliages - Vocabulaire -
fications et les conditions de livraison du chrome
Partie 1: Matériaux.
métallique habituellement fourni pour allier les aciers
spéciaux et les alliages.
3 Définitions
i
Pour les besoins de la présente Norme internationale,
2 Références normatives
la définition suivante et celles contenues dans
I’ISO 8954-l s’appliquent.
Les normes suivantes contiennent des dispositions
3.1 chrome métallique: Matériau à allier ayant une
qui, par suite de la référence qui en est faite,
teneur en chrome minimale de 98 % en masse,
constituent des dispositions valables pour la présente
Norme internationale. Au moment de la publication, obtenu par réduction ou par méthode électrolytique.
les éditions indiquées étaient en vigueur. Toute
norme est sujette à révision et les parties prenantes
des accords fondés sur la présente Norme interna-
4 Renseignements pour la commande
tionale sont invitées à rechercher la possibilité
d’appliquer les éditions les plus récentes des normes
Les commandes de chrome métallique doivent
indiquées ci-après. Les membres de la CEI et de I’ISO
comprendre les renseignements suivants:
possèdent le registre des Normes internationales en
vigueur à un moment donné. a) quantité;
b) constitution des livraisons;
I SO 565: 1990, Tamis de contrôle - Tissus métal-
liques, tôles métalliques perforées et feuilles électro- c) composition chimique, conformément aux dési-
formées - Dimensions nominales des ouvertures. gnations données dans le tableau 1;
Tableau 1 - Composition chimique
Composition chimique, % (WLJIZ)
Si Al S P CU As Bi Sb Zn Pb Sn N
Désignationl) Cr
02 H2
max. max. max. max. max.
min. max. max. max. max. max. max. max. max. max.
0,010 0,005 0,005 - - - 0,001 0,02 0,05
RECr99,6 99,6 0,04 0,35 0,05
ECr99,2 99,2 0,Ol 0,20 0,02 0,030 0,005 0,005 0,005 0,003 0,005 0,005 0,003 0,001 0,03 0,55
99,0 0,3 0,Ol 0,Ol 0,Ol 0,005 0,005 0,000 5 0,002 0,005 0,005 0,004 0,Ol
RACr99
0’1
0,02 0,02 0,Ol 0,Ol 0,001 0,OOE 0,Ol 0,001 0,ooc 0,05
ACr98,5 98,5 0,5 0,03
0,3
ACr98 98,0 0,8 0,05 0,04 0,03 0,04 - - -
0,5
NOTE - Le chrome métallique de la nuance ECr peut être fourni sous la forme dégazée ayant une teneur en gaz maximale de: 0,02 N,
0,05 O2 et 0,001 HZ.
1) E: électrolytique
A: aluminothermique
R: raffiné

---------------------- Page: 3 ----------------------
ISO 10387:1994(F) 0 ISO
d) tranches granulométriques, conformément aux 5.22 Dans les compositions chimiques indiquées
désignations données dans le tableau 2; dans le tableau 1, ne sont mentionnés que les
éléments principaux et les impuretés courantes. Si
e) spécifications pour les procès-verbaux d’analyse,
l’acheteur désire des intervalles de teneurs plus
l’emballage, etc.
étroits pour les éléments principaux et/ou des limites
différentes pour les éléments spécifiés et/ou des
Tableau 2 - Dimensions granulométriques
limites pour les éléments non spécifiés, cela doit faire
l’objet d’un accord entre le fournisseur et l’acheteur.
Tranche
granulo- Tamisat Refus
Classe 5.2.3 Les compositions chimiques données dans le
métrique
tableau 1 dépendent de la fidélité des méthodes
mm % (dm) max. % (dm) max.
d’échantillonnage. et d’analyse du chrome métallique
(voir article 6).
1 IOà 100 10 10
2 2 à 50 10 Aucun morceau
n’excéde 1,15 fois
5.3 Tranches granulométriques
3 2 à 20 10
la limite supérieure
de la tranche gra-
5.3.1 Le chrome métallique doit être fourni en
nulométrique spé-
morceaux ou en particules concassées et tamisées.
cifiée dans deux
Les tranches granulométriques et les tolérances
ou trois directions
doivent être conformes à celles indiquées dans le
tableau 2. Les valeurs de tamisat doivent être
4 5
<2
valables au point de livraison à l’acheteur?
Les dimensions granulométriques spécifiées sont
5 Spécifications
déterminées par tamisage sur un tamis en acier à
ouvertures carrées (voir I’ISO 565).
5.1 Constitution des liv
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.