Forestry machinery - Safety requirements on radio remote controls

This European standard specifies the additional requirements in respect to radio remote control systems that are used in forestry machinery. The fundamental requirements are defined in the standard IEC 62745. Radio remote control systems for the following forestry machines are discussed in this standard:
- Forestry cable winches according to EN ISO 19472, winches with outriggers for forestry trailers, log splitters and cutting splitters as well as hauling winches;
- Self-propelled machinery for forestry according to EN ISO 11850 (machines for felling, moving and debranching, forwarders, log loaders, skidders, processors, harvesting machines, mulchers as well as multipurpose machines of these construction types, as described in ISO 6814); the definitive part of the standard defines essential requirements in respect to the driving function of the machine;
- Mobile yarders for timber logging corresponding to EN 16517;
- Log splitters and combined cutting splitters according to EN 609-1 and EN 609-2 including their support winches and circular sawing machines for fire wood corresponding to EN 1870-6;
- Chopping machines according to EN 13525 and chopping machines with mechanical feed systems for the production of woodcuts;
- Forestry cranes and similar devices that are used on self-propelled machinery for forestry according to EN 11850 and, as indicated above, for timber transport, timber loading, the loading of forestry goods or forestry products as well as for the handling and arrangement of timber full harvesters, felling attachments, machines for felling and moving, attachments, saw heads, gripper-saw combinations with or without load or similar devices and machines, insofar they are not treated in EN 12999. Forestry cranes can be a component of the forestry machine on which they are mounted.

Forstmaschinen - Sicherheitsanforderungen für Funkfernsteuerungen

Diese Europäische Norm legt zusätzliche Anforderungen in Bezug auf kabellose Steuerungssysteme zum Einsatz in Forstmaschinen fest. Die grundlegenden Anforderungen werden in der Norm prEN 62745 definiert. Kabellose Steuerungssysteme für die folgenden Forstmaschinen werden in dieser Norm behandelt:
-   Kabelwinden von Forstmaschinen nach ISO 19472, Winden für Holzspaltmaschinen;
-   Selbstfahrende Forstmaschinen nach EN ISO 11850 (Maschinen zum Fällen, Bewegen und Entasten, Maschinen für den Frachttransport, Stammlader, Schlepper, Verarbeitungsmaschinen, Erntemaschinen, Mulcher sowie Mehrzweckmaschinen dieser Konstruktionsarten, wie in ISO 6814 beschrieben); der definierende Teil dieser Norm definiert wesentliche Anforderungen in Bezug auf die Fahrfunktion der Maschine;
-   Mobile Seilkrananlagen für den Holztransport nach prEN 16517;
-   Holzspaltmaschinen und kombinierte Brennholzspalter nach EN 609-1:2016, 5.9.2.1, Buschholzhacker nach EN 13525 sowie Holzhackmaschinen mit mechanischen Zuführsystemen für die Fertigung von Holzhackschnitzeln und Zerkleinerungs- und Schleifmaschinen;
-   Hublader für die Forstwirtschaft und ähnliche Geräte, die auf selbstfahrenden Maschinen und Anhängern für die Forstwirtschaft nach EN ISO 11850 eingesetzt werden sowie, wie oben angegeben, für den Holztransport, die Holzverladung, das Beladen von forstwirtschaftlichen Gütern oder Produkten sowie für den Umschlag und die Anordnung von Holzerntemaschinen, Anbauteilen für die Abholzung, Maschinen für die Abholzung und Bewegung, Anbauteile, Sägeköpfe, Kombinationsmaschinen aus Greifer und Säge mit oder ohne Lasten oder ähnliche Einrichtungen und Maschinen, sofern diese nicht durch EN 12999 abgedeckt sind. Hublader für die Forstwirtschaft können eine Komponente einer Forstmaschine darstellen, auf welcher diese montiert sind.

Matériel forestier - Prescriptions de sécurité pour les systèmes de commande à distance radio

La présente Norme européenne spécifie les prescriptions supplémentaires relatives aux systèmes de commande sans fil utilisés dans le matériel forestier. Les prescriptions fondamentales sont définies dans la norme prEN 62745. Les systèmes de commande sans fil pour le matériel forestier suivant sont traités dans la présente norme :
-   treuils forestiers conformes à l’ISO 19472, treuils pour fendeuses de bûches ;
-   matériels forestiers automoteurs conformes à l’EN ISO 11850 (machines pour l’abattage, le déplacement et l’ébranchage, débardeuses, chargeuses de grumes, débusqueuses, façonneuses, récolteuses, gyrobroyeuses, ainsi que leurs versions multifonctions, telles que décrites dans l’ISO 6814) ; la partie définitive de la norme définit les prescriptions essentielles de la fonction de conduite de la machine ;
-   téléphériques à mât mobile pour l’exploitation du bois correspondant au prEN 16517 ;
-   fendeuses de bûche et machines combinées scie/fendeuse de bûches conformes à l’EN 609 1:2016, 5.9.2.1, déchiqueteuses conformes à l’EN 13525 et déchiqueteuses à systèmes d’alimentation mécanique pour la production de copeaux de bois et broyeuses/déchiqueteuses ;
-   chargeuses forestières et dispositifs similaires qui sont utilisés sur des matériels forestiers automoteurs et remorques conformes à l’EN ISO 11850 et, comme indiqué ci-dessus, pour le transport de bois, le chargement de bois, le chargement de marchandises ou produits forestiers, ainsi que pour la manutention et la disposition des abatteuses-façonneuses de bois, des têtes d’abattage, des machines d’abattage et de déplacement, des accessoires, des têtes de scies, des ensembles pince de préhension/scie avec ou sans charge ou des dispositifs et machines similaires dans la mesure où ils ne sont pas traités dans l’EN 12999. Les chargeuses forestières peuvent être un composant de la machine forestière sur laquelle elles sont montées.

Gozdarski stroji - Varnostne zahteve za radijsko daljinsko upravljanje

Ta evropski standard določa dodatne zahteve v zvezi s sistemi radijskega daljinskega upravljanja, ki se uporabljajo v gozdarskih strojih. Temeljne zahteve so opredeljene v standardu IEC 62745. V tem standardu so obravnavani sistemi radijskega daljinskega upravljanja za naslednje gozdarske stroje: – gozdarski kabelski vitli v skladu s standardom EN ISO 19472, vitli s stabilizatorji za gozdarske prikolice, cepilnike lesa in rezalne cepilnike ter vlečni vitli; – stroji z lastnim pogonom za uporabo v gozdarstvu v skladu s standardom EN ISO 11850 (stroji za podiranje, premikanje in odstranjevanje vej, zglobi traktorji za vleko, stroji za nakladanje hlodov, zglobi traktorji za transport hlodov, stroji za kleščenje, stroji za izdelavo sortimentov (harvesterji), stroji za mulčenje in večnamenski stroji te vrste konstrukcije, kot je opisano v standardu ISO 6814); dokončni del standarda opredeljuje bistvene zahteve v zvezi s pogonsko funkcijo stroja; – mobilni žični žerjavi za spravilo lesa v skladu s standardom EN 16517; – cepilniki lesa in kombinirani rezalni cepilniki v skladu s standardoma EN 609-1 in EN 609-2, vključno z njihovimi opornimi vitli in krožnim žagami za drva v skladu s standardom EN 1870-6; – sekalniki v skladu s standardom EN 13525 in sekalniki z mehanskimi dovajalnimi sistemi za izdelavo lesnih sekancev; – gozdarski žerjavi in podobne naprave, ki se uporabljajo na strojih z lastnim pogonom za uporabo v gozdarstvu v skladu s standardom EN 11850 in, kot je navedeno zgoraj, za transport hlodov, nakladanje hlodov, nakladanje gozdarskih proizvodov ter za ravnanje z in razporejanje harvesterjev s hlodi, priključkov za podiranje strojev za podiranje in premikanje, priključkov, glav za žaganje, kombinacij žag s primežem z ali brez bremena ali podobnih naprav in strojev, če niso obravnavani v standardu EN 12999. Gozdarski žerjavi so lahko komponenta gozdarskega stroja, na katerem so nameščeni.

General Information

Status
Published
Public Enquiry End Date
04-Jan-2017
Publication Date
08-Jan-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jan-2019
Due Date
10-Mar-2019
Completion Date
09-Jan-2019

Buy Standard

Standard
EN 17067:2019 - BARVE
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gozdarski stroji - Varnostne zahteve za radijsko daljinsko upravljanjeForstmaschinen - Sicherheitsanforderungen für FunkfernsteuerungenForestry machinery - Safety requirements on radio remote controls65.060.80Gozdarska opremaForestry equipmentICS:Ta slovenski standard je istoveten z:EN 17067:2018SIST EN 17067:2019en01-marec-2019SIST EN 17067:2019SLOVENSKI
STANDARD



SIST EN 17067:2019



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 17067
December
t r s z ICS
x wä r x rä z r English Version
Forestry machinery æ Safety requirements on radio remote controls Matériel forestier æ Prescriptions de sécurité pour les systèmes de commande à distance radio
Forstmaschinen æ Sicherheitsanforderungen für Funkfernsteuerungen This European Standard was approved by CEN on
u September
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s y r x yã t r s z ESIST EN 17067:2019



EN 17067:2018 (E) 2 Contents Page European foreword . 4 Introduction . 5 1 Scope . 6 2 Normative references . 7 3 Terms and definitions . 8 4 Requirements for cableless control systems (CCS) . 13 4.1 General . 13 4.2 Minimum control functions . 13 4.3 General Safe STOP (GSS) . 13 4.4 Control elements . 14 4.4.1 General requirements . 14 4.4.2 Unintended activation . 14 4.4.3 Latching control functions . 14 4.4.4 Minimum requirements. 14 4.5 Design principles for forestry cableless control systems . 14 4.5.1 Protection against unintended activation . 14 4.5.2 Ergonomics . 15 4.6 Marking . 15 4.7 Requirements for controls with dual or multiple functions . 19 4.7.1 Dual function with hold-to-run control (shift button) . 19 4.7.2 Multiple control functions with mode selector . 19 4.8 Multiple operator control units . 19 4.9 Multiple base stations . 20 4.10 Response times . 20 4.10.1 Start and stop of movement functions . 20 4.10.2 Fault tolerating times . 20 4.11 Safety functions . 20 4.11.1 Minimum requirements for the performance level. 20 4.11.2 Safety objectives . 20 4.11.3 Monitoring and safety of the wireless connection . 21 4.12 Prevention of unintentional start of a function that would lead to a hazardous movement . 21 4.13 Environment requirements . 21 4.13.1 Temperature range according to EN 60068-2-14 and EN 60068-2-1 . 21 4.13.2 Mechanical strength according to EN 60068-2-31 . 21 4.13.3 IP protection class according to EN 60529 . 21 4.13.4 Requirements for the electromagnetic compatibility (EMC) . 21 4.14 Self-tests . 22 4.15 Warning devices . 22 4.16 Control outputs . 22 4.17 Marking . 22 4.17.1 General . 22 4.17.2 Information on the remote station . 23 4.17.3 Information on the base station . 23 4.18 Instruction handbook . 24 SIST EN 17067:2019



EN 17067:2018 (E) 3 4.18.1 General . 24 4.18.2 Winches . 26 4.18.3 Mobile yarders . 26 4.18.4 Additional instructions for CCS integration in a wood chipper . 26 5 Requirements for cableless control systems for logging winches – minimum scope of functions . 26 6 Requirements for cable-less control systems for travelling functions . 27 7 Requirements for cableless control systems for mobile yarders . 29 7.1 General . 29 7.2 Multiple operator control units . 29 7.3 Transfer/Adopt function. 29 7.4 Stop function . 30 7.4.1 General . 30 7.4.2 Passive stop - additional requirements . 30 7.5 Marking . 30 8 Requirements for cableless control systems for wood chippers . 32 Annex A (normative)
Examples of permissible radio ranges of CCS for mobile yarders . 35 A.1 Action ranges with long distance in automatic mode . 35 A.2 Carriage controlled by the tower yarder . 36 A.2.1 Without remote stations . 36 A.2.2 With remote commands reaching the tower yarder . 37 A.2.3 Remote commands reaching the tower yarder via external repeater . 38 A.3 Carriage controlled by CCS . 38 A.3.1 Remote commands reaching the tower yarder via a transceiver installed on the carriage . 38 A.3.2 Remote commanded active self-propelled carriage . 39 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC amended by Directive 2009/127/EC aimed to be covered . 40 Bibliography . 42
SIST EN 17067:2019



EN 17067:2018 (E) 4 European foreword This document (EN 17067:2018) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be withdrawn at the latest by June 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. Cableless control systems are increasingly used in forestry. As only the fundamental requirements are defined in the standard EN 62745, it is necessary to formulate a draft standard that defines the particular requirements in respect to safety in forestry. This standard draft regulates all special features of cableless control systems up to the machine interface. Safety system specifications for the machines resulting through cableless control systems according to this standard or which are controlled according to these specifications can be found in the relevant safety standards of these machines (e.g. EN ISO 11850). This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2006/42/EC amended by Directive 2009/127/EC and EU Directive 2014/30/EU. For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 17067:2019



EN 17067:2018 (E) 5 Introduction This document is a type-C standard as stated in EN ISO 12100.
This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety:
— machine manufacturers (small, medium and large enterprises);
— health and safety bodies (regulators, accident prevention organizations, market surveillance etc.)
Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups:
— machine users/employers (small, medium and large enterprises);
— machine users/employees (e.g. trade unions, organizations for people with special needs);
— service providers, e.g. for maintenance (small, medium and large enterprises);
— consumers (in case of machinery intended for use by consumers).
The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document.
The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the scope of this document.
When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. SIST EN 17067:2019



EN 17067:2018 (E) 6 1 Scope This document specifies both common and machine specific requirements for cableless control systems for use with the following forestry machinery.
— forestry cable winches according to ISO 19472, winches for log splitters; — self-propelled machinery for forestry according to EN ISO 11850 (machines for felling, moving and debranching, forwarders, log loaders, skidders, processors, harvesting machines, mulchers as well as multipurpose machines of these construction types, as described in ISO 6814); the definitive part of the standard defines essential requirements for the driving function of the machine; — mobile yarders for timber logging corresponding to EN 16517; — log splitters and combined firewood splitters according to EN 609-1:2016, 5.9.2.1 Chipping machines according to EN 13525 and chipping machines with mechanical feed systems for the production of woodchips and shredding /grinding machines; — forestry boom loaders and similar devices that are used on self-propelled machinery and trailers for forestry according to EN ISO 11850 and, as indicated above, for timber transport, timber loading, the loading of forestry goods or forestry products as well as for the handling and arrangement of timber harvesters, felling attachments, machines for felling and moving, attachments, saw heads, gripper-saw combinations with or without load or similar devices and machines, insofar they are not dealt with in EN 12999. Forestry boom loaders can be a component of the forestry machine on which they are mounted. This document deals with significant hazards (as listed in Annex ZA), hazardous situations and events relevant to cableless control systems used with the above specific forestry machinery when used as intended and under the conditions of misuse foreseeable by the manufacturer.
NOTE General requirements for cableless controls for machinery are given in the standard EN 62745 and these are applicable to cableless control systems of forestry machinery. This document deals only with the remote operation of machines. Risk reduction (protective) measures related to the operations carried out by the machine are specified in machine specific standards.
This document is not applicable to cableless control systems for forestry machinery manufactured before the date of its publication. SIST EN 17067:2019



EN 17067:2018 (E) 7 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 388, Protective gloves against mechanical risks EN 13525, Forestry machinery - Wood chippers - Safety EN 60068-2-1, Environmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-14, Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-31, Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens EN 60204-1, Safety of machinery — Electrical equipment of machines — Part 1: General requirements EN 60447, Basic and safety principles for man-machine interface, marking and identification - Actuating principles EN 60529, Degrees of protection provided by enclosures (IP Code) EN 60947-5-5, Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function EN 62745:2017, Safety of machinery - Requirements for cableless control systems of machinery EN ISO 13849-1, Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1) EN ISO 13850, Safety of machinery - Emergency stop function - Principles for design (ISO 13850) EN ISO 14982, Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982) ISO 10968, Earth-moving machinery — Operator's controls ISO 15817:2012, Earth-moving machinery — Safety requirements for remote operator control systems ISO 19472, Machinery for forestry — Winches — Dimensions, performance and safety SIST EN 17067:2019



EN 17067:2018 (E) 8 3 Terms and definitions For the purposes of this document, the terms and definitions of EN 62745 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
http://www.electropedia.org/
http://www.iso.org/obp 3.1 cableless controller device, via which commands from the machine operator are transmitted without physical connection via at least one part of the distance between a remote station of the operator and the machine 3.2 cableless control system CCS system, comprising at least one remote station and one base station, which uses a cableless controller for transmission of the commands between both 3.3 general safe stop GSS safety related stop function to stop hazardous movements of the controlled machines in order to reach an off- state Note 1 to entry: A GSS is not an emergency stop. 3.4 emergency stop EMS safety related stop function to stop hazardous movements of the controlled machines in order to reach an off- state which is available at any time Note 1 to entry: The emergency stop is defined in EN ISO 13850. 3.5 receiver part of a cableless control system, which only receives commands from a transmitter Note 1 to entry: See Figure 1.
Figure 1 — Receiver SIST EN 17067:2019



EN 17067:2018 (E) 9 3.6 transmitter part of a cableless control system, which only sends commands to a receiver Note 1 to entry: See Figure 2.
Figure 2 — Transmitter 3.7 transceiver part of a cableless control system, which both sends and receives commands Note 1 to entry: See Figure 3.
Figure 3 — Transceiver 3.8 repeater device to increase the maximum signal range and bypass obstructing terrain structures Note 1 to entry: See Figure 4.
Figure 4 — Repeater SIST EN 17067:2019



EN 17067:2018 (E) 10 3.9 operator control unit control unit arrangement of one or more actuators (part of a device to which an external manual effect is to be applied) permanently mounted on the same control panel or located in the same housing Note 1 to entry: A control unit of the operator can also comprise associated devices (e.g. potentiometer, indicator lights, instruments, display devices etc.) 3.10 frame “package” of bits that is sent between a remote station and a base station and typically comprises the following: a) address code; b) operational control commands; c) other control commands; d) codes for fault detection (and correction) 3.11 address code part of a frame that enables a base station or a remote station to detect frames that are provided to transmit commands to them Note 1 to entry: The base station or remote station respond to commands with recognized relevant address code. 3.12 operational control command control command, which is to initiate, change or maintain a machine function or movement 3.13 fault detection code additional bits added to each frame in order to enable the detection of transmission errors 3.14 neutral frame frame in which all operational control commands are in such a state that it does not initiate any hazardous movements by the machine, if it is received by the base station Note 1 to entry: Neutral frames are able to contain data (i.e. a valid signal) between a transmitter and a base station, e.g. in order to exclude the automatic initiation of the stop function at a machine. Note 2 to entry: The transmission of neutral frames is intended to prevent hazardous movements by the machine derived from the assumption or resumption of the communication. Note 3 to entry: Neutral frames are able to contain data, e.g. parameterisation data and commands, which cannot lead to hazardous machine movements. SIST EN 17067:2019



EN 17067:2018 (E) 11 3.15 time limited transmission transmission of frames, executed during any operational control commands, followed by a specified time period of the transmission of neutral frames 3.16 continuous transmission transmission of frames, executed during any operational control commands, followed by the transmission of neutral frames until the next operational control command 3.17 hamming distance number of points in which the bits of two frames of the same bit length differ from each other 3.18 remote station part of a cableless control system, via which an operator is connected to the cableless control system Note 1 to entry: The remote station of a cableless control system is often referred to as “transmitter”; however, a remote station that is part of a bidirectional cableless control system contains a transmitter and a receiver. Note 2 to entry: The remote station forms the control unit of the operator of a cableless control system. Note 3 to entry: The remote station can be hand-held, mobile (relative to the base station) or stationary. 3.19 base station part of the cableless control system, which forms an interface between the cableless controller and other parts of the machine control system Note 1 to entry: The base station of a cableless control system is sometimes referred to as a “receiver”, but a base station that is part of a bi-directional cableless control system will incorporate both a receiver and a transmitter. Note 2 to entry: The base station may be installed on stationary or mobile machines. 3.20 stop output output circuit of the base station, which is connected to the control system of the machine in order to execute a stop Note 1 to entry: Stop outputs can be executed as safety relevant or not as safety relevant. 3.21 OFF-state state of the stop output(s) of the base station, in which the controlled machine is initiated to stop operation and in which its start-up is prevented (e.g. the output circuit is interrupted and hence prevents the current flow) [Source: EN 61496-1:2013; term 3.17, modified] SIST EN 17067:2019



EN 17067:2018 (E) 12 3.22 safety-relevant stop function stop function provided by the CCS that results in an OFF-state [Source: EN 62745:2017; term 3.16, modified] 3.23 active stop OFF state initiated by the transmission of a stop signal from the remote station to the base station 3.24 passive stop OFF state deriving from the absence of a valid signal at the base station Note 1 to entry: A passive stop is typically initiated by leaving the area, battery failure or EM interference. 3.25 automatic stop ATS OFF state, initiated without activation of a device by an operator [Source: EN 62745:2017; term 3.19, modified] 3.26 manual stop OFF state, initiated through activation of a device by an operator 3.27 valid signal every frame, including a neutral frame, which comprises a relevant address code and a valid operational command or commands for the machine 3.28 line automatics target automatics control system moving the carriage of a yarder system to a pre-defined target at pre-defined speeds in automatic mode without additional action by an operator 3.29 functional safety part of the overall safety relating to the equipment under control (EUC) and its control system depends on the correct functioning of the Electrical/Electronic/Programmable electronic safety-related systems and other risk reduction measures [Source: EN 61508-4:2010, 3.1.12] 3.30 response time time span between action at the command unit and response at the interface at the machine SIST EN 17067:2019



EN 17067:2018 (E) 13 3.31 fault tolerating time duration between the occurrence of a fault and the deactivation of the controlled/regulated device, which is tolerated in an application case without bringing about a hazardous situation Note 1 to entry: Modes of action other than the deactivation of controlled devices are possible, if it can be verified that they prevent hazardous situations. [SOURCE: EN 60730-1:2011, H.2.23.1] 3.32 primary remote station
part of a cableless control system offering the complete range of functions which can be controlled at a given machine remotely or holding the right to allow other parts of a cableless control system to provide control Note 1 to entry: The primary remote station may provide permission to a secondary remote station to allow operation of certain functions. Note 2 to entry: The primary remote station may be cabled or a cableless operator control unit. 3.33 secondary remote station part of a cableless control system offering a limited range of functions which can be controlled at a given machine remotely
Note 1 to entry: The primary remote station may provide permission to a secondary remote station to allow operation of certain functions. 3.34
auxiliary functions
functions required for rigging and derigging a machine or for carrying out maintenance work 4 Requirements for cableless control systems (CCS) 4.1 General The requirements of EN 62745 shall be met. 4.2 Minimum control functions The CCS shall provide safe control for all of the remotely operated functions of the machine consistent with protective devices
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.