SIST EN 50364:2018
(Main)Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications
Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications
This product standard applies to devices operating within the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications, in relation to exposure to electromagnetic fields
The object of this generic standard is to provide a route for evaluation of such equipment against limits on human exposure to electric, magnetic and electromagnetic fields, and induced and contact current.
NOTE Other standards can apply to products covered by this document. In particular this document is not designed to evaluate the electromagnetic compatibility with other equipment; nor does it reflect any product safety requirements other than those specifically related to human exposure to electromagnetic fields.
Begrenzung der Exposition von Personen gegenüber elektromagnetischen Feldern von Geräten, die im Frequenzbereich von 0 Hz bis 300 GHz betrieben und in der elektronischen Artikelüberwachung (en: EAS), Hochfrequenz-Identifizierung (en: RFID) und ähnlichen Anwendungen verwendet werden
Norme de produit pour l'exposition humaine aux champs électromagnétiques émis par les dispositifs fonctionnant dans la gamme de fréquences de 0 Hz à 300 GHz, utilisés pour la surveillance électronique des objets (EAS), l'identification par radiofréquence (RFID) et les applications similaires
Produktni standard za izpostavljenost ljudi elektromagnetnim sevanjem naprav, ki delujejo v frekvenčnem območju od 0 Hz do 300 GHz in se uporabljajo za elektronski nadzor blaga (EAS), radiofrekvenčno razpoznavanje (RFID) in podobne namene
Ta standard se uporablja za naprave, ki delujejo v frekvenčnem območju od 0 Hz do 300 GHz in se uporabljajo za elektronski nadzor blaga (EAS), radiofrekvenčno prepoznavanje (RFID) in podobne namene, v povezavi z izpostavljenostjo elektromagnetnim sevanjem.
Namen tega splošnega standarda je opredelitev načina vrednotenja take opreme v povezavi z omejitvami glede izpostavljenosti ljudi električnim, magnetnim in elektromagnetnim poljem ter induciranemu in kontaktnemu toku.
OPOMBA: Za proizvode, ki jih obravnava ta dokument, se lahko uporabljajo drugi standardi. Ta standard ni namenjen za ocenjevanje elektromagnetne združljivosti z drugo opremo in ne odraža nobenih varnostnih zahtev za proizvode, razen tistih, ki se posebej navezujejo na izpostavljenost delavcev elektromagnetnemu sevanju.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50364:2018
01-marec-2018
1DGRPHãþD
SIST EN 50364:2010
3URGXNWQLVWDQGDUG]DL]SRVWDYOMHQRVWOMXGLHOHNWURPDJQHWQLPVHYDQMHPQDSUDYNL
GHOXMHMRYIUHNYHQþQHPREPRþMXRG+]GR*+]LQVHXSRUDEOMDMR]D
HOHNWURQVNLQDG]RUEODJD ($6 UDGLRIUHNYHQþQRUD]SR]QDYDQMH 5),' LQSRGREQH
QDPHQH
Product standard for human exposure to electromagnetic fields from devices operating in
the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS),
Radio Frequency Identification (RFID) and similar applications
Begrenzung der Exposition von Personen gegenüber elektromagnetischen Feldern von
Geräten, die im Frequenzbereich von 0 Hz bis 300 GHz betrieben und in der
elektronischen Artikelüberwachung (en: EAS), Hochfrequenz-Identifizierung (en: RFID)
und ähnlichen Anwendungen verwendet werden
Norme de produit pour l'exposition humaine aux champs électromagnétiques émis par
les dispositifs fonctionnant dans la gamme de fréquences de 0 Hz à 300 GHz, utilisés
pour la surveillance électronique des objets (EAS), l'identification par radiofréquence
(RFID) et les applications similaires
Ta slovenski standard je istoveten z: EN 50364:2018
ICS:
13.280 Varstvo pred sevanjem Radiation protection
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 50364:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50364:2018
---------------------- Page: 2 ----------------------
SIST EN 50364:2018
EUROPEAN STANDARD EN 50364
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2018
ICS 13.280; 33.100.01 Supersedes EN 50364:2010
English Version
Product standard for human exposure to electromagnetic fields
from devices operating in the frequency range 0 Hz to 300 GHz,
used in Electronic Article Surveillance (EAS), Radio Frequency
Identification (RFID) and similar applications
Norme de produit pour l'exposition humaine aux champs Produktnorm für die Exposition von Personen gegenüber
électromagnétiques émis par les dispositifs fonctionnant elektromagnetischen Feldern von Geräten, die im
dans la gamme de fréquences de 0 Hz à 300 GHz, utilisés Frequenzbereich von 0 Hz bis 300 GHz betrieben und in
pour la surveillance électronique des objets (EAS), der elektronischen Artikelüberwachung (en: EAS),
l'identification par radiofréquence (RFID) et les applications Hochfrequenz-Identifizierung (en: RFID) und ähnlichen
similaires Anwendungen verwendet werden
This European Standard was approved by CENELEC on 2017-10-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50364:2017 E
---------------------- Page: 3 ----------------------
SIST EN 50364:2018
EN 50364:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Exposure conditions . 5
5 Normative limits . 5
6 Assessment of compliance . 5
6.1 General . 5
6.2 Assessment of devices which emit multiple frequencies . 6
6.3 Correspondence between limits and test procedures . 6
7 Assessment uncertainty . 8
8 Evaluation report . 8
Annex ZZA (informative) Relationship between this European standard and the safety objectives of
Directive 2014/35/EU [2014 OJ L96] aimed to be covered . 9
Annex ZZB (informative) Relationship between this European standard and the essential
requirements of Directive 2014/53/EU [2014 OJ L153] aimed to be covered. 10
2
---------------------- Page: 4 ----------------------
SIST EN 50364:2018
EN 50364:2018 (E)
European foreword
This document (EN 50364:2018) has been prepared by the Technical Committee CENELEC/TC 106X
“Electromagnetic fields in the human environment”.
The following dates are fixed:
– latest date by which the EN has to be implemented (dop) 2018-10-09
at national level by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) 2020-10-09
with the EN have to be withdrawn
This document supersedes EN 50364:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and
the European Free Trade Association, and supports essential requirements of the Radio Equipment
Directive 2014/53/EU and the Low Voltage Directive 2014/35/EU.
For relationships with EU Directives, see informative Annexes ZZA and ZZB, which are integral parts of this
document.
This European Standard is meant to be read in conjunction with prEN 62311:2017 “Assessment of electronic
and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300
GHz)”.
3
---------------------- Page: 5 ----------------------
SIST EN 50364:2018
EN 50364:2018 (E)
1 Scope
This product standard applies to devices operating within the frequency range 0 Hz to 300 GHz, used in
electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications, in relation
to exposure to electromagnetic fields
The object of this product standard is to provide a route for evaluation of such equipment against limits on
human exposure to electric, magnetic and electromagnetic fields, and induced and contact current.
NOTE Other standards can apply to products covered by this document. In particular this document is not designed
to evaluate the electromagnetic compatibility with other equipment; nor does it reflect any product safety requirements
other than those specifically related to human exposure to electromagnetic fields.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 62369-1:2009, Evaluation of human exposure to electromagnetic fields from short range devices (SRDs)
in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices
used for electronic article surveillance, radio frequency identification and similar systems (IEC 62369-1:2008)
prEN 62311:2017, Assessment of electronic and electrical equipment related to human exposure restrictions
for electromagnetic fields (0 Hz - 300 GHz) (IEC/CDV 62311:201X)]
Council Recommendation 1999/519/EC of 12 July 1999, on the limitation of exposure of the general public to
electromagnetic fields (0 Hz to 300 GHz), Official Journal, L199, of 1999-7-30, p.59-70
Directive 2013/35/EU of 26 June 2013, on the minimum health and safety requirements regarding the
exposure of workers to the risks arising from physical agents (electromagnetic fields). Official Journal, L179,
of 2013-6-29, p. 1–21
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
action level
level provided for practical exposure assessment purposes, derived from exposure limit values
Note 1 to entry: Respect of the action level will ensure respect of the relevant exposure limit value. If the action level is
exceeded, it does not necessarily follow that the exposure limit value will be exceeded.
3.2
basic restriction
restriction on exposure of the general public to electric, magnetic and electromagnetic fields that is based
directly on established health effects and biological considerations
3.3
exposure limit value
restriction on exposure of workers to electric, magnetic and electromagnetic fields that is based directly on
established health effects and biological considerations
4
---------------------- Page: 6 ----------------------
SIST EN 50364:2018
EN 50364:2018 (E)
3.4
reference level
derived reference level
level provided for practical exposure assessment purposes, derived from basic restrictions
Note 1 to entry: Respect of the reference level will ensure respect of the relevant basic restriction. If the reference level
is exceeded, it does not necessarily follow that the basic restriction will be exceeded.
4 Exposure conditions
Equipment which meets the limits for general public exposure as given in this document (Clause 5) will
automatically meet the limits for workers.
Equipment which meets the limits for workers will not necessarily meet the limits for the general public and,
unless intended only for workers’ use when at work, equipment shall be tested against general public limits.
Equipment intended only for use by workers when at work shall have this condition clearly identified in the
user instructions. This use condition shall be identified in the test report.
All intended operating conditions as well as the reasonably foreseeable conditions of human exposure from
the product shall be taken into account in the evaluation.
The reasonably foreseeable conditions of exposure should be based on realistic exposure and/or installation
parameters representative of all readily-predictable human and system behaviour such as the duration of
exposure, time varying of transmitted power, simultaneously operated frequency bands and time averaging
as defined in normative limits.
In cases where the reasonably foreseeable exposure conditions for workers are different from the
reasonably foreseeable exposure conditions for the general public, then a separate assessment shall be
made covering those differences.
5 Normative limits
For equipment intended for use by the g
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.