kSIST FprEN IEC 61753-082-02:2024
(Main)Fibre optic interconnecting devices and passive components performance standard - Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for category C - Indoor controlled environment
Fibre optic interconnecting devices and passive components performance standard - Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for category C - Indoor controlled environment
IEC 61753-082-02:2024 contains the minimum initial test, measurement requirements and severities which a fibre optic 1,31/1,55 µm wide wavelength division multiplexing (WWDM) device satisfies in order to be categorised as meeting the requirements of category C (indoor controlled environment), as defined in IEC 61753-1:2018, Annex A. WWDM is defined in IEC 62074-1. This first edition cancels and replaces the first edition of IEC 61753-082-2 published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) change of test conditions harmonizing with IEC 61753-1.
Lichtwellenleiter – Verbindungselemente und passive Bauelemente – Betriebsverhalten – Teil 082-02: Pigtailed-Einmoden-Lichtwellenleiter 1,31/1,55 µm WWDM-Geräte für die Kategorie C – Kontrollierte Innenraumumgebung
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 082-02: Dispositifs WWDM 1,31 µm/1,55 µm à fibres optiques unimodales équipées d’amorce pour la catégorie c - Environnement intérieur contrôlé
IEC 61753-082-02: 2024 contient les exigences minimales initiales d’essai et de mesure, ainsi que les sévérités auxquelles un dispositif fibronique de multiplexage par répartition en longueur d’onde large (WWDM, Wide Wavelength Division Multiplexing) 1,31 µm/1,55 µm est tenu de satisfaire pour être classé comme étant conforme aux exigences de la catégorie C (environnement intérieur contrôlé), selon la définition donnée dans l’IEC 61753‑1:2018, Annexe A. Le protocole WWDM est défini dans l’IEC 62074-1. Cette première édition annule et remplace la première édition de l’IEC 61753-082-2 parue en 2008 et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) modification des conditions d'essai pour harmonisation avec l’IEC 61753-1.
Tehnični standard za optične spojne elemente in pasivne komponente - 082-02. del: Naprave WWDM (širokopasovni multipleks) s svitkastim enorodovnim optičnim vlaknom 1,31/1,55 µm za kategorijo C - Notranje nadzorovano okolje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61753-082-02:2023
01-julij-2023
Tehnični standard za optične spojne elemente in pasivne komponente - 082-02.
del: Naprave WWDM (širokopasovni multipleks) s svitkastim enorodovnim
optičnim vlaknom 1,31/1,55 µm za kategorijo C - Notranje nadzorovano okolje
Fibre optic interconnecting devices and passive components performance standard -
Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for category
C - Indoor controlled environment
Ta slovenski standard je istoveten z: prEN IEC 61753-082-02:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61753-082-02:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61753-082-02:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61753-082-02:2023
86B/4755/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61753-082-02 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-05-26 2023-08-18
SUPERSEDES DOCUMENTS:
86B/4715/CD, 86B/4746A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fibre optic interconnecting devices and passive components performance standard - Part 082 -
02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for category C - Indoor
controlled environment
PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61753-082-02:2023
IEC CDV 61753-082-02/Ed1 © IEC 2023 2 86B/4755/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 1 Scope . 4
5 2 Normative references . 4
6 3 Terms and definitions . 5
7 4 Test . 5
8 5 Test report . 6
9 6 Performance requirements . 6
10 6.1 Reference components . 6
11 6.2 Dimensions . 6
12 6.3 Sample size . 6
13 6.4 Test details and requirements . 6
14
15 Annex A (normative) Sample size . 12
16 Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.