SIST ISO/CIE 8995-3:2020
Lighting of work places - Part 3: Lighting requirements for safety and security of outdoor work places
Lighting of work places - Part 3: Lighting requirements for safety and security of outdoor work places
ISO/CIE 8995-3:2018 specifies the lighting requirements which will contribute to the visual needs for safety and security within outdoor work places.
Éclairage des lieux de travail - Partie 3: Exigences requises de l'éclairage des lieux de travail extérieurs en matière de sûreté et de sécurité
Razsvetljava na delovnem mestu - 3. del: Zahteve za razsvetljavo za zagotavljanje varnosti in zaščite na delovnih mestih na prostem
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ISO/CIE 8995-3:2020
01-oktober-2020
Razsvetljava na delovnem mestu - 3. del: Zahteve za razsvetljavo za zagotavljanje
varnosti in zaščite na delovnih mestih na prostem
Lighting of work places - Part 3: Lighting requirements for safety and security of outdoor
work places
Éclairage des lieux de travail - Partie 3: Exigences requises de l'éclairage des lieux de
travail extérieurs en matière de sûreté et de sécurité
Ta slovenski standard je istoveten z: ISO/CIE 8995-3:2018
ICS:
13.180 Ergonomija Ergonomics
91.160.10 Notranja razsvetljava Interior lighting
SIST ISO/CIE 8995-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO/CIE 8995-3:2020
---------------------- Page: 2 ----------------------
SIST ISO/CIE 8995-3:2020
INTERNATIONAL ISO/CIE
STANDARD 8995-3
First edition
2018-03
Lighting of work places —
Part 3:
Lighting requirements for safety and
security of outdoor work places
Éclairage des lieux de travail —
Partie 3: Exigences requises de l'éclairage des lieux de travail
extérieurs en matière de sûreté et de sécurité
Reference number
ISO/CIE 8995-3:2018(E)
©
ISO/CIE 2018
---------------------- Page: 3 ----------------------
SIST ISO/CIE 8995-3:2020
ISO/CIE 8995-3:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/CIE 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office CIE Central Bureau
CP 401 • Ch. de Blandonnet 8 Babenbergerstraße 9/9A
CH-1214 Vernier, Geneva A-1010 Vienna, Austria
Phone: +41 22 749 01 11 Phone: +43 1 714 3187
Fax: +41 22 749 09 47 Fax: +41 22 749 09 47
Email: copyright@iso.org Email: ciecb@cie.co.at
Website: www.iso.org Website: www.cie.co.at
Published in Switzerland
ii © ISO/CIE 2018 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO/CIE 8995-3:2020
ISO/CIE 8995-3:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Lighting requirements for safety and security . 2
5 Verification procedures . 4
5.1 General . 4
5.2 Illuminance. 4
5.3 Glare rating . 4
5.4 Colour rendering . 4
Annex A (normative) Lighting design criteria . 5
Bibliography . 7
© ISO/CIE 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST ISO/CIE 8995-3:2020
ISO/CIE 8995-3:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by CIE and Technical Committee ISO/TC 274, Light and lighting.
This first edition cancels and replaces ISO 8995-3:2006/CIE S 016:2005, of which it constitutes a minor
revision. (ISO 8995-3:2006/CIE S 016:2005 was prepared by CIE Division 5.)
A list of all parts in the ISO 8995 series can be found on the ISO website.
iv © ISO/CIE 2018 – All rights reserved
---------------------- Page: 6 ----------------------
SIST ISO/CIE 8995-3:2020
ISO/CIE 8995-3:2018(E)
Introduction
To enable people to perform visual tasks efficiently and accurately, especially during the night, adequate
and appropriate lighting has to be provided.
The degree of visibility and comfort required in a wide range of outdoor work places is governed by the
type and duration of activity.
© ISO/CIE 2018 – All rights reserved v
---------------------- Page: 7 ----------------------
SIST ISO/CIE 8995-3:2020
---------------------- Page: 8 ----------------------
SIST ISO/CIE 8995-3:2020
INTERNATIONAL STANDARD ISO/CIE 8995-3:2018(E)
Lighting of work places —
Part 3:
Lighting requirements for safety and security of outdoor
work places
1 Scope
This document specifies the lighting requirements which will contribute to the visual needs for safety
and security within outdoor work places.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including
...
INTERNATIONAL ISO/CIE
STANDARD 8995-3
First edition
2018-03
Lighting of work places —
Part 3:
Lighting requirements for safety and
security of outdoor work places
Éclairage des lieux de travail —
Partie 3: Exigences requises de l'éclairage des lieux de travail
extérieurs en matière de sûreté et de sécurité
Reference number
ISO/CIE 8995-3:2018(E)
©
ISO/CIE 2018
---------------------- Page: 1 ----------------------
ISO/CIE 8995-3:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/CIE 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office CIE Central Bureau
CP 401 • Ch. de Blandonnet 8 Babenbergerstraße 9/9A
CH-1214 Vernier, Geneva A-1010 Vienna, Austria
Phone: +41 22 749 01 11 Phone: +43 1 714 3187
Fax: +41 22 749 09 47 Fax: +41 22 749 09 47
Email: copyright@iso.org Email: ciecb@cie.co.at
Website: www.iso.org Website: www.cie.co.at
Published in Switzerland
ii © ISO/CIE 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/CIE 8995-3:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Lighting requirements for safety and security . 2
5 Verification procedures . 4
5.1 General . 4
5.2 Illuminance. 4
5.3 Glare rating . 4
5.4 Colour rendering . 4
Annex A (normative) Lighting design criteria . 5
Bibliography . 7
© ISO/CIE 2018 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/CIE 8995-3:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by CIE and Technical Committee ISO/TC 274, Light and lighting.
This first edition cancels and replaces ISO 8995-3:2006/CIE S 016:2005, of which it constitutes a minor
revision. (ISO 8995-3:2006/CIE S 016:2005 was prepared by CIE Division 5.)
A list of all parts in the ISO 8995 series can be found on the ISO website.
iv © ISO/CIE 2018 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/CIE 8995-3:2018(E)
Introduction
To enable people to perform visual tasks efficiently and accurately, especially during the night, adequate
and appropriate lighting has to be provided.
The degree of visibility and comfort required in a wide range of outdoor work places is governed by the
type and duration of activity.
© ISO/CIE 2018 – All rights reserved v
---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO/CIE 8995-3:2018(E)
Lighting of work places —
Part 3:
Lighting requirements for safety and security of outdoor
work places
1 Scope
This document specifies the lighting requirements which will contribute to the visual needs for safety
and security within outdoor work places.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
CIE S 015, Lighting of outdoor work places
CIE S 017, ILV: International Lighting Vocabulary
CIE 112, Glare evaluation system for use within outdoor sports- and area lighting
3 Terms and definitions
For the purposes of this document, the terms and definitions given in CIE S 017 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available
...
SLOVENSKI STANDARD
oSIST ISO/CIE 8995-3:2020
01-junij-2020
Razsvetljava delovnih mest - 3. del: Zahteve za razsvetljavo glede varnosti in
zaščite delovnih mest na prostem
Lighting of work places -- Part 3: Lighting requirements for safety and security of outdoor
work places
Éclairage des lieux de travail -- Partie 3: Exigences requises de l'éclairage des lieux de
travail extérieurs en matière de sûreté et de sécurité
Ta slovenski standard je istoveten z: ISO/CIE 8995-3:2018
ICS:
13.180 Ergonomija Ergonomics
91.160.10 Notranja razsvetljava Interior lighting
oSIST ISO/CIE 8995-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST ISO/CIE 8995-3:2020
---------------------- Page: 2 ----------------------
oSIST ISO/CIE 8995-3:2020
INTERNATIONAL ISO/CIE
STANDARD 8995-3
First edition
2018-03
Lighting of work places —
Part 3:
Lighting requirements for safety and
security of outdoor work places
Éclairage des lieux de travail —
Partie 3: Exigences requises de l'éclairage des lieux de travail
extérieurs en matière de sûreté et de sécurité
Reference number
ISO/CIE 8995-3:2018(E)
©
ISO/CIE 2018
---------------------- Page: 3 ----------------------
oSIST ISO/CIE 8995-3:2020
ISO/CIE 8995-3:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/CIE 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office CIE Central Bureau
CP 401 • Ch. de Blandonnet 8 Babenbergerstraße 9/9A
CH-1214 Vernier, Geneva A-1010 Vienna, Austria
Phone: +41 22 749 01 11 Phone: +43 1 714 3187
Fax: +41 22 749 09 47 Fax: +41 22 749 09 47
Email: copyright@iso.org Email: ciecb@cie.co.at
Website: www.iso.org Website: www.cie.co.at
Published in Switzerland
ii © ISO/CIE 2018 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST ISO/CIE 8995-3:2020
ISO/CIE 8995-3:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Lighting requirements for safety and security . 2
5 Verification procedures . 4
5.1 General . 4
5.2 Illuminance. 4
5.3 Glare rating . 4
5.4 Colour rendering . 4
Annex A (normative) Lighting design criteria . 5
Bibliography . 7
© ISO/CIE 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST ISO/CIE 8995-3:2020
ISO/CIE 8995-3:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by CIE and Technical Committee ISO/TC 274, Light and lighting.
This first edition cancels and replaces ISO 8995-3:2006/CIE S 016:2005, of which it constitutes a minor
revision. (ISO 8995-3:2006/CIE S 016:2005 was prepared by CIE Division 5.)
A list of all parts in the ISO 8995 series can be found on the ISO website.
iv © ISO/CIE 2018 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST ISO/CIE 8995-3:2020
ISO/CIE 8995-3:2018(E)
Introduction
To enable people to perform visual tasks efficiently and accurately, especially during the night, adequate
and appropriate lighting has to be provided.
The degree of visibility and comfort required in a wide range of outdoor work places is governed by the
type and duration of activity.
© ISO/CIE 2018 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST ISO/CIE 8995-3:2020
---------------------- Page: 8 ----------------------
oSIST ISO/CIE 8995-3:2020
INTERNATIONAL STANDARD ISO/CIE 8995-3:2018(E)
Lighting of work places —
Part 3:
Lighting requirements for safety and security of outdoor
work places
1 Scope
This document specifies the lighting requirements which will contribute to the visual needs for safety
and security within outdoor work places.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any ame
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.