Ferromolybdenum -- Specification and conditions of delivery

Refers to ferromolybdenum usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.

Ferro-molybdène -- Spécifications et conditions de livraison

Feromolibden - Specifikacija in dobavni pogoji

General Information

Status
Published
Publication Date
31-Mar-2000
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-2000
Due Date
01-Apr-2000
Completion Date
01-Apr-2000

Buy Standard

Standard
ISO 5452:1980 - Ferromolybdenum -- Specification and conditions of delivery
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 5452:2000
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 5452:1980 - Ferro-molybdene -- Spécifications et conditions de livraison
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 5452:1980 - Ferro-molybdene -- Spécifications et conditions de livraison
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

5452
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlE~YHAPO~HAR OPt-AHM3ALWl fl0 CTAH~APTM3Al@lM@ORGANISATION INTERNATIONALE DE NORMALISATION
Specification and conditions of
Ferromolybdenum -
delivery
Ferro-molybdhe - Spkcifica tions et conditions de livraison
First edition - 1980-12-01
Ref. No. ISO 54524980 (EI
UDC 669.15’28498
iii
-
Descriptors : ferroalloys, ferromolybdenum, specifications, delivery conditions, Chemical composition.
Bi
0
tn Price based on 3 pages

---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bedies). The work of developing Inter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 5452 was developed by Technical Committee ISO/TC 132,
Ferroaioys, and was circulated to the member bodies in November 1979.
lt has been approved by the member bodies of the following countries :
Australia India South Africa, Rep. of
Austria Italy Sweden
Brazil United Kingdom
Japan
China Norway USA
Czechoslovakia
Poland USSR
France Portugal Y ugoslavia
Germany, F. R. Romania
No member body expressed disapproval of the document.
0 International Organkation for Standardkation, 1980
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD ISO5452=198O(E)
Specification and conditions
Ferromolybdenum -
of delivery
1 Scope and field of application 5 Requirements
This International Standard specifies requirements and con-
5.1 Constitution of consignment
ditions of delivery for ferromolybdenum usually supplied for
steelmaking and foundry use.
Ferromolybdenum shall be delivered in consignments con-
stituted by one of the following methods.
2 References
51.1 Tapped lot method
ISO 565, Test sieves - Wo ven me tal wire clo th and Perfora ted
Nominal skes of apertures.
plate -
A consignment constituted by the tapped lot method consists
of a ferromolybdenum mass of one melt (or one part of a con-
Sampling and preparation of samples
ISO 3713, Ferroalioys -
tinuous tap).
-
General rules. 1)
ISO 4173, Ferromolybdenum - Determination of molybdenum 5.1.2 Graded lot method
content - Gravimetric method. 1)
A consignment constituted by the graded lot method consists
of a number of melts (or Parts of continuous taps) of one
3 Definition
ferromolybdenum designation.
3.1 ferromolybdenum : A master alloy of iron and The molybdenum content of the melts (or Parts of continuous
molybdenum with a minimum molybdenum content of 550 % taps) constituting the consignment shall not differ from each
by mass, and a maximum molybdenum content of 75,0 % by other by more than 3 % absolute.
mass, obtained by reduction.
5.1.3 Blended lot method
4 Information for ordering
A consignment constituted by the blended lot method consists
of a number of melts (or Parts of continuous taps) of one
Orders for ferromolybdenum shall include the following infor-
ferromolybdenum designation, which have been crushed to a
mation.
particle size less than 50 mm and thoroughly mixed.
a) Quantity.
The content of the main constituent of the melts (or Parts of
continuous taps) constituting the consignment may vary
b) Constitution of consignment.
between the minimum and maximum limits specified for the
appropriate ferromolybdenum designation.
c) Chemical composition in accordance with the designa-
tions given in table 1.
d) Particle size ranges in accordance with the classes 5.2 Chemical composition
given in table 2.
5.2.1’ The Chemical composition of ferromolybdenum shall be
e) Necessary requirements for analysis reports, packing, as specified in table 1. The limits stated correspond to particle
size ranges in classes 1 to 4 in accordance with table 2.
etc. I as appropriate.
1) At present at the Stage of draft.

---------------------- Page: 3 ----------------------
ISO 54524980 (E)
5.2.2 The Chemical compositions given in table 1 show only 6.1.3 If required, arbitration sampling shall be carried out by
the main constituent elements and usual impurities. If the pur- an arbitrator Chosen by mutual agreement between supplier
chaser requires closer ranges for the main element contents and purchaser. Sampling shall be carried out by the method
specified in ISO 3713, but other methods of sampling having
and/or different limits for specified elements and/or limits for
non-specified elements, this shall be agreed
...

SLOVENSKI STANDARD
SIST ISO 5452:2000
01-april-2000
Feromolibden - Specifikacija in dobavni pogoji
Ferromolybdenum -- Specification and conditions of delivery
Ferro-molybdène -- Spécifications et conditions de livraison
Ta slovenski standard je istoveten z: ISO 5452:1980
ICS:
77.100 Železove zlitine Ferroalloys
SIST ISO 5452:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 5452:2000

---------------------- Page: 2 ----------------------

SIST ISO 5452:2000
5452
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlE~YHAPO~HAR OPt-AHM3ALWl fl0 CTAH~APTM3Al@lM@ORGANISATION INTERNATIONALE DE NORMALISATION
Specification and conditions of
Ferromolybdenum -
delivery
Ferro-molybdhe - Spkcifica tions et conditions de livraison
First edition - 1980-12-01
Ref. No. ISO 54524980 (EI
UDC 669.15’28498
iii
-
Descriptors : ferroalloys, ferromolybdenum, specifications, delivery conditions, Chemical composition.
Bi
0
tn Price based on 3 pages

---------------------- Page: 3 ----------------------

SIST ISO 5452:2000
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bedies). The work of developing Inter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 5452 was developed by Technical Committee ISO/TC 132,
Ferroaioys, and was circulated to the member bodies in November 1979.
lt has been approved by the member bodies of the following countries :
Australia India South Africa, Rep. of
Austria Italy Sweden
Brazil United Kingdom
Japan
China Norway USA
Czechoslovakia
Poland USSR
France Portugal Y ugoslavia
Germany, F. R. Romania
No member body expressed disapproval of the document.
0 International Organkation for Standardkation, 1980
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 5452:2000
INTERNATIONAL STANDARD ISO5452=198O(E)
Specification and conditions
Ferromolybdenum -
of delivery
1 Scope and field of application 5 Requirements
This International Standard specifies requirements and con-
5.1 Constitution of consignment
ditions of delivery for ferromolybdenum usually supplied for
steelmaking and foundry use.
Ferromolybdenum shall be delivered in consignments con-
stituted by one of the following methods.
2 References
51.1 Tapped lot method
ISO 565, Test sieves - Wo ven me tal wire clo th and Perfora ted
Nominal skes of apertures.
plate -
A consignment constituted by the tapped lot method consists
of a ferromolybdenum mass of one melt (or one part of a con-
Sampling and preparation of samples
ISO 3713, Ferroalioys -
tinuous tap).
-
General rules. 1)
ISO 4173, Ferromolybdenum - Determination of molybdenum 5.1.2 Graded lot method
content - Gravimetric method. 1)
A consignment constituted by the graded lot method consists
of a number of melts (or Parts of continuous taps) of one
3 Definition
ferromolybdenum designation.
3.1 ferromolybdenum : A master alloy of iron and The molybdenum content of the melts (or Parts of continuous
molybdenum with a minimum molybdenum content of 550 % taps) constituting the consignment shall not differ from each
by mass, and a maximum molybdenum content of 75,0 % by other by more than 3 % absolute.
mass, obtained by reduction.
5.1.3 Blended lot method
4 Information for ordering
A consignment constituted by the blended lot method consists
of a number of melts (or Parts of continuous taps) of one
Orders for ferromolybdenum shall include the following infor-
ferromolybdenum designation, which have been crushed to a
mation.
particle size less than 50 mm and thoroughly mixed.
a) Quantity.
The content of the main constituent of the melts (or Parts of
continuous taps) constituting the consignment may vary
b) Constitution of consignment.
between the minimum and maximum limits specified for the
appropriate ferromolybdenum designation.
c) Chemical composition in accordance with the designa-
tions given in table 1.
d) Particle size ranges in accordance with the classes 5.2 Chemical composition
given in table 2.
5.2.1’ The Chemical composition of ferromolybdenum shall be
e) Necessary requirements for analysis reports, packing, as specified in table 1. The limits stated correspond to particle
size ranges in classes 1 to 4 in accordance with table 2.
etc. I as appropriate.
1) At present at the Stage of draft.

---------------------- Page: 5 ----------------------

SIST ISO 5452:2000
ISO 54524980 (E)
5.2.2 The Chemical compositions given in table 1 show only 6.1.3 If required, a
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIK&YHAPO~HAR OPrAHM3A~MR fl0 CTAHJJAPTM3AlJl4l+l.ORGANISATION INTERNATIONALE DE NORMALISATION
Ferro-molybdène - Spécifications et conditions de
livraison
Specifica tion and conditions of detivery
Ferromolybdenum -
Première édition - 1980-12-01
CDU 669.15’28-198 Réf. no : ISO 54524980 (F)
Descripteurs : ferro-alliage, ferro-molybdéne, spécification, état de livraison, composition chimique.
Prix basé sur 3 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 5452 a été élaborée par le comité technique ISO/TC 132,
Ferra-alliages, et a été soumise aux comités membres en novembre 1979.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Inde Royaume-Uni
Allemagne, R. F. Italie Suéde
Australie Japon
Tchécoslovaquie
Autriche Norvège URSS
Brésil
Pologne USA
Chine Portugal Yougoslavie
France Roumanie
Aucun comité membre ne l’a désapprouvée.
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 5452-1980 (F)
Spécifications et conditions
Ferro-molybdène -
de livraison
1 Objet et domaine d’application 5 Spécifications
La présente Norme internationale indique les spécifications et
5.1 Méthodes de constitution des livraisons
les conditions de livraison du ferro-molybdéne habituellement
fourni en aciérie et en fonderie.
Le ferro-molybdène doit être fourni par livraisons constituées
suivant l’une des méthodes suivantes.
5.1.1 Méthode des lots par coulée
2 Références
Une livraison constituée suivant cette méthode consiste en une
ISO 565, Tamis de contrôle - Toiles métalliques et tôles perfo-
masse de ferro-molybdéne provenant d’une seule coulée (ou
rées - Dimensions nominales des ouvertures.
d’une partie de coulée continue).
ISO 3713, Ferro-alliages - ichantillonnage et préparation des
échan tifIons - Règles générales. 1)
51.2 Méthode des lots par coulées regroupées par
nuance
ISO 4173, Ferro-molybdène - Dosage du molybdène -
Méthode gravim&rique?
Une livraison constituée suivant cette méthode consiste en un
certain nombre de coulées (ou de plusieurs parties de coulées
continues) d’un ferro-molybdène d’une désignation donnée.
3 Définition
La teneur en molybdéne des coulées (ou des parties de coulées
continues) constituant la livraison ne doit pas différer de l’une à
3.1 ferro-molybdène : Alliage mère de fer et de molybdène
l’autre de plus de 3 % absolu.
ayant une teneur en molybdène minimale de 55,0 % et maxi-
male de 75,0 % en masse, obtenu par réduction.
51.3 Méthode des lots par mélange de coulées
Une livraison constituée par la méthode des lots par mélange de
coulées de même désignation consiste en un certain nombre de
4 Renseignements pour la commande
coulées (ou de parties de coulées continues) d’un ferro-
molybdène d’une désignation donnée, qui ont été concassées à
Les commandes de ferro-molybdéne doivent comprendre les
une dimension granulométrique inférieure à 50 mm et qui ont
renseignements suivants :
été soigneusement homogénéisées.
a) Quantité.
La teneur en élément principal des coulées (ou parties de cou-
lées continues), constituant la livraison, peut varier entre la
b) Méthodes de constitution des livraisons.
limite minimale et la limite maximale spécifiées pour la désigna-
tion appropriée du ferro-molybdéne.
c) Composition chimique, conformément aux désigna-
tions données dans le tableau 1.
5.2 Composition chimique
d) Tranches granulométriques, conformément aux classes
données dans le tableau 2.
5.2.1 La composition chimique du ferro-molybdéne doit être
telle que spécifiée dans le tableau 1. Les limites indiquées cor-
e) Spécifications pour les procès-verbaux d’analyse,
respondent aux tranches granulométriques des classes 1 à 4
l’emballage, etc.
conformément au tableau 2.
1) Actuellement au stade de projet.

---------------------- Page: 3 ----------------------
SO 5452-1980 (FI
5.2.2 Dans les compositions chimiques indiquées dans le 6.1.2 L’échantillonnage est habituellement effectué sur le lieu
tableau 1, ne sont mentionnés que les éléments principaux et de stockage du fournisseur, sauf accord contraire. Cependant,
les impuretés courantes. Si l’acheteur désire des intervalles de quel que soit l’endroit où l’échantillonnage est effectué, des
teneurs plus étroits pour l’élément principal et/ou des limites
représentants du fournisseur et de l’acheteur peuvent être pré-
différentes pour les éléments spécifiés et/ou des limites pour sents.
les éléments non spécifiés, cela doit faire l’objet d’un accord
entre le fournisseur et l’acheteur.
6.1.3 Si un
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIK&YHAPO~HAR OPrAHM3A~MR fl0 CTAHJJAPTM3AlJl4l+l.ORGANISATION INTERNATIONALE DE NORMALISATION
Ferro-molybdène - Spécifications et conditions de
livraison
Specifica tion and conditions of detivery
Ferromolybdenum -
Première édition - 1980-12-01
CDU 669.15’28-198 Réf. no : ISO 54524980 (F)
Descripteurs : ferro-alliage, ferro-molybdéne, spécification, état de livraison, composition chimique.
Prix basé sur 3 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 5452 a été élaborée par le comité technique ISO/TC 132,
Ferra-alliages, et a été soumise aux comités membres en novembre 1979.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Inde Royaume-Uni
Allemagne, R. F. Italie Suéde
Australie Japon
Tchécoslovaquie
Autriche Norvège URSS
Brésil
Pologne USA
Chine Portugal Yougoslavie
France Roumanie
Aucun comité membre ne l’a désapprouvée.
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 5452-1980 (F)
Spécifications et conditions
Ferro-molybdène -
de livraison
1 Objet et domaine d’application 5 Spécifications
La présente Norme internationale indique les spécifications et
5.1 Méthodes de constitution des livraisons
les conditions de livraison du ferro-molybdéne habituellement
fourni en aciérie et en fonderie.
Le ferro-molybdène doit être fourni par livraisons constituées
suivant l’une des méthodes suivantes.
5.1.1 Méthode des lots par coulée
2 Références
Une livraison constituée suivant cette méthode consiste en une
ISO 565, Tamis de contrôle - Toiles métalliques et tôles perfo-
masse de ferro-molybdéne provenant d’une seule coulée (ou
rées - Dimensions nominales des ouvertures.
d’une partie de coulée continue).
ISO 3713, Ferro-alliages - ichantillonnage et préparation des
échan tifIons - Règles générales. 1)
51.2 Méthode des lots par coulées regroupées par
nuance
ISO 4173, Ferro-molybdène - Dosage du molybdène -
Méthode gravim&rique?
Une livraison constituée suivant cette méthode consiste en un
certain nombre de coulées (ou de plusieurs parties de coulées
continues) d’un ferro-molybdène d’une désignation donnée.
3 Définition
La teneur en molybdéne des coulées (ou des parties de coulées
continues) constituant la livraison ne doit pas différer de l’une à
3.1 ferro-molybdène : Alliage mère de fer et de molybdène
l’autre de plus de 3 % absolu.
ayant une teneur en molybdène minimale de 55,0 % et maxi-
male de 75,0 % en masse, obtenu par réduction.
51.3 Méthode des lots par mélange de coulées
Une livraison constituée par la méthode des lots par mélange de
coulées de même désignation consiste en un certain nombre de
4 Renseignements pour la commande
coulées (ou de parties de coulées continues) d’un ferro-
molybdène d’une désignation donnée, qui ont été concassées à
Les commandes de ferro-molybdéne doivent comprendre les
une dimension granulométrique inférieure à 50 mm et qui ont
renseignements suivants :
été soigneusement homogénéisées.
a) Quantité.
La teneur en élément principal des coulées (ou parties de cou-
lées continues), constituant la livraison, peut varier entre la
b) Méthodes de constitution des livraisons.
limite minimale et la limite maximale spécifiées pour la désigna-
tion appropriée du ferro-molybdéne.
c) Composition chimique, conformément aux désigna-
tions données dans le tableau 1.
5.2 Composition chimique
d) Tranches granulométriques, conformément aux classes
données dans le tableau 2.
5.2.1 La composition chimique du ferro-molybdéne doit être
telle que spécifiée dans le tableau 1. Les limites indiquées cor-
e) Spécifications pour les procès-verbaux d’analyse,
respondent aux tranches granulométriques des classes 1 à 4
l’emballage, etc.
conformément au tableau 2.
1) Actuellement au stade de projet.

---------------------- Page: 3 ----------------------
SO 5452-1980 (FI
5.2.2 Dans les compositions chimiques indiquées dans le 6.1.2 L’échantillonnage est habituellement effectué sur le lieu
tableau 1, ne sont mentionnés que les éléments principaux et de stockage du fournisseur, sauf accord contraire. Cependant,
les impuretés courantes. Si l’acheteur désire des intervalles de quel que soit l’endroit où l’échantillonnage est effectué, des
teneurs plus étroits pour l’élément principal et/ou des limites
représentants du fournisseur et de l’acheteur peuvent être pré-
différentes pour les éléments spécifiés et/ou des limites pour sents.
les éléments non spécifiés, cela doit faire l’objet d’un accord
entre le fournisseur et l’acheteur.
6.1.3 Si un
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.