Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style (IEC 63171-1:2020)

This part of IEC 63171 covers two-way, shielded or unshielded, free and fixed connectors for
data transmission with frequencies up to 600 MHz and with current carrying capacity up
to 2,0 A at 60 °C. It is intended to specify the common dimensions, mechanical, electrical,
signal integrity, environmental characteristics, reliability specifications and corresponding
tests for these connectors.

Steckverbinder für elektrische und elektronische Einrichtungen - Teil 1: Bauartspezifikation für geschirmte oder ungeschirmte freie und feste Steckverbinder, 2-polig - Mechanische Steckungsinformationen, Pinbelegung und zusätzliche Anforderungen für Typ 1 / Kupfer LC Bauform

Connecteurs pour équipements électriques et électroniques - Partie 1: Spécification particulière pour les fiches et les embases bidirectionnelles, écrantées ou non écrantées - Informations sur l’accouplement mécanique, brochage et exigences supplémentaires pour connecteur LC de type 1 à doigts de guidage en cuivre (IEC 63171-1:2020)

63171-1:2020 couvre les fiches et embases bidirectionnelles, écrantées ou non écrantées, assurant la transmission de données à des fréquences pouvant atteindre 600 MHz et à un courant admissible pouvant atteindre 2,0 A à 60 °C. Elle vise à spécifier les dimensions communes, les caractéristiques mécaniques, électriques, d’intégrité du signal et d’environnement, les spécifications de fiabilité et les essais correspondants pour ces connecteurs.

Konektorji za električno in elektronsko opremo - 1. del: Podrobne specifikacije za dvopolne, zaslonjene ali nezaslonjene, proste ali pritrjene konektorje - Informacije o mehanskih prilagoditvah, funkcije polov in dodatne zahteve za tip 1, iz bakra, vrsta LC (IEC 63171-1:2020)

General Information

Status
Published
Publication Date
09-Jun-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Jun-2020
Due Date
10-Aug-2020
Completion Date
10-Jun-2020

Buy Standard

Standard
EN IEC 63171-1:2020
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63171-1:2020
01-september-2020
Konektorji za električno in elektronsko opremo - 1. del: Podrobne specifikacije za
dvopolne, zaslonjene ali nezaslonjene, proste ali pritrjene konektorje - Informacije
o mehanskih prilagoditvah, funkcije polov in dodatne zahteve za tip 1, iz bakra,
vrsta LC (IEC 63171-1:2020)
Connectors for electrical and electronic equipment - Part 1: Detail specification for two-
way, shielded or unshielded, free and fixed connectors - Mechanical mating information,
pin assignment and additional requirements for Type 1 copper LC style (IEC 63171-
1:2020)
Connecteurs pour équipements électriques et électroniques - Partie 1: Spécification
particulière pour les fiches et les embases bidirectionnelles, écrantées ou non écrantées
- Informations sur l’accouplement mécanique, brochage et exigences supplémentaires
pour connecteur LC de type 1 à doigts de guidage en cuivre (IEC 63171-1:2020)
Ta slovenski standard je istoveten z: EN IEC 63171-1:2020
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
SIST EN IEC 63171-1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63171-1:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 63171-1:2020


EUROPEAN STANDARD EN IEC 63171-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2020
ICS 31.220.10

English Version
Connectors for electrical and electronic equipment - Part 1:
Detail specification for two-way, shielded or unshielded, free and
fixed connectors - Mechanical mating information, pin
assignment and additional requirements for Type 1 copper LC
style
(IEC 63171-1:2020)
Connecteurs pour équipements électriques et électroniques Steckverbinder für elektrische und elektronische
- Partie 1: Spécification particulière pour les fiches et les Einrichtungen - Teil 1: Bauartspezifikation für geschirmte
embases bidirectionnelles, écrantées ou non écrantées - oder ungeschirmte freie und feste Steckverbinder, 2-polig:
Informations sur l'accouplement mécanique, brochage et mechanische Steckungsinformationen, Pinbelegung und
exigences supplémentaires pour connecteur LC de type 1 à zusätzliche Anforderungen für Typ 1 / Kupfer LC Bauform
doigts de guidage en cuivre (IEC 63171-1:2020)
(IEC 63171-1:2020)
This European Standard was approved by CENELEC on 2020-05-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63171-1:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63171-1:2020
EN IEC 63171-1:2020 (E)
European foreword
The text of document 48B/2783/FDIS, future edition 1 of IEC 63171-1, prepared by SC 48B "Electrical
connectors" of IEC/TC 48 "Electrical connectors and mechanical structures for electrical and electronic
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 63171-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-19
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.