Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017)

This document specifies technical delivery conditions for filler materials and fluxes for fusion welding.
This document does not apply to other auxiliary materials such as shielding gases.

Schweißzusätze - Technische Lieferbedingungen für Schweißzusätze und Pulver - Art des Produktes, Maße, Grenzabmaße und Kennzeichnung (ISO 544:2017)

Dieses Dokument legt technische Lieferbedingungen für Schweißzusätze und Pulver zum Schmelz-schweißen fest.
Dieses Dokument gilt nicht für andere Schweißhilfsstoffe wie Schutzgase.

Produits consommables pour le soudage - Conditions techniques de livraison des produits d'apport et des flux - Type de produits, dimensions, tolérances et marquage (ISO 544:2017)

ISO 544:2017 spécifie les conditions techniques de livraison des produits d'apport et des flux utilisés pour le soudage par fusion.
ISO 544:2017 ne s'applique pas aux autres produits consommables auxiliaires, tels que les gaz de protection.

Dodajni materiali za varjenje - Tehnični dobavni pogoji za dodajne materiale in praške - Vrsta izdelka, izmere, tolerance in označevanje (ISO 544:2017)

Ta dokument določa tehnične dobavne pogoje za dodajne materiale in talila za talilno varjenje.
Ta dokument se ne uporablja za druge dodatne materiale, kot so zaščitni plini.

General Information

Status
Published
Public Enquiry End Date
02-Mar-2017
Publication Date
11-Jan-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Jan-2018
Due Date
12-Mar-2018
Completion Date
12-Jan-2018

Relations

Buy Standard

Standard
EN ISO 544:2018
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 544:2017
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 544:2018
01-februar-2018
1DGRPHãþD
SIST EN ISO 544:2011
'RGDMQLPDWHULDOL]DYDUMHQMH7HKQLþQLGREDYQLSRJRML]DGRGDMQHPDWHULDOHLQ
SUDãNH9UVWDL]GHONDL]PHUHWROHUDQFHLQR]QDþHYDQMH ,62
Welding consumables - Technical delivery conditions for filler materials and fluxes - Type
of product, dimensions, tolerances and markings (ISO 544:2017)
Schweißzusätze - Technische Lieferbedingungen für Schweißzusätze und Pulver - Art
des Produktes, Maße, Grenzabmaße und Kennzeichnung (ISO 544:2017)
Produits consommables pour le soudage - Conditions techniques de livraison des
produits d'apport et des flux - Type de produits, dimensions, tolérances et marquage
(ISO 544:2017)
Ta slovenski standard je istoveten z: EN ISO 544:2017
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST EN ISO 544:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 544:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 544:2018


EN ISO 544
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2017
EUROPÄISCHE NORM
ICS 25.160.20 Supersedes EN ISO 544:2011
English Version

Welding consumables - Technical delivery conditions for
filler materials and fluxes - Type of product, dimensions,
tolerances and markings (ISO 544:2017)
Produits consommables pour le soudage - Conditions Schweißzusätze - Technische Lieferbedingungen für
techniques de livraison des produits d'apport et des Schweißzusätze und Pulver - Art des Produktes, Maße,
flux - Type de produits, dimensions, tolérances et Grenzabmaße und Kennzeichnung (ISO 544:2017)
marquage (ISO 544:2017)
This European Standard was approved by CEN on 3 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 544:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 544:2018
EN ISO 544:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 544:2018
EN ISO 544:2017 (E)
European foreword
This document (EN ISO 544:2017) has been prepared by Technical Committee ISO/TC 44 “Welding and
allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 544:2011.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 544:2017 has been approved by CEN as EN ISO 544:2017 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 544:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 544:2018
INTERNATIONAL ISO
STANDARD 544
Fifth edition
2017-11
Welding consumables — Technical
delivery conditions for filler materials
and fluxes — Type of product,
dimensions, tolerances and markings
Produits consommables pour le soudage — Conditions techniques
de livraison des produits d'apport et des flux — Type de produits,
dimensions, tolérances et marquage
Reference number
ISO 544:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------

SIST EN ISO 544:2018
ISO 544:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 544:2018
ISO 544:2017(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Product type and welding process . 1
5 Dimensions and tolerances . 1
5.1 Solid wires and solid wire electrodes, tubular cored wires and tubular cored
electrodes, solid and tubular cored rods and covered electrodes . 1
5.2 Solid strip electrodes . 2
5.3 Cored strip electrodes and thin foils . 2
5.4 Fluxes . 4
6 Rounding procedure . 4
7 Condition of welding consumables . 4
7.1 Covered electrodes . 4
7.2 Wires, rods, and strips . 4
8 Marking . 8
8.1 Marking on the product . 8
8.1.1 Covered electrodes . 8
8.1.2 Wires and strips . 8
8.1.3 Rods . . 8
8.2 Marking on the package . 8
9 Packaging . 8
10 Inspection documents . 9
Bibliography .10
© ISO 2017 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 544:2018
ISO 544:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see http://www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see http://www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: http://www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 3, Welding consumables.
This fifth edition cancels and replaces the fourth edition (ISO 544:2011), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— in 5.4, clarification that fluxes can be obtainable in different particle size distributions is given (not
all fluxes are ava
...

SLOVENSKI STANDARD
oSIST prEN ISO 544:2017
01-februar-2017
'RGDMQLPDWHULDOL]DYDUMHQMH7HKQLþQLGREDYQLSRJRML]DGRGDMQHLQSRWURãQH
PDWHULDOHLQSUDãNH9UVWDL]GHONDL]PHUHWROHUDQFHLQR]QDþHYDQMH ,62',6

Welding consumables - Technical delivery conditions for filler materials and fluxes - Type
of product, dimensions, tolerances and markings (ISO/DIS 544:2016)
Schweißzusätze - Technische Lieferbedingungen für Schweißzusätze und Pulver - Art
des Produktes, Maße, Grenzabmaße und Kennzeichnung (ISO/DIS 544:2016)
Produits consommables pour le soudage - Conditions techniques de livraison des
matériaux d'apport et des flux - Type de produit, dimensions, tolérances et marquage
(ISO/DIS 544:2016)
Ta slovenski standard je istoveten z: prEN ISO 544
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
oSIST prEN ISO 544:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 544:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 544:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 544
ISO/TC 44/SC 3 Secretariat: ANSI
Voting begins on: Voting terminates on:
2016-12-19 2017-03-12
Welding consumables — Technical delivery conditions for
filler materials and fluxes — Type of product, dimensions,
tolerances and markings
Produits consommables pour le soudage — Conditions techniques de livraison des matériaux d’apport et
des flux — Type de produit, dimensions, tolérances et marquage
ICS: 25.160.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 544:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016

---------------------- Page: 3 ----------------------
oSIST prEN ISO 544:2017
ISO/DIS 544:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 544:2017
ISO/DIS 544:2016(E)
Contents
Foreword . iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Product type and welding process . 1
5 Dimensions and tolerances . 1
5.1 Solid wires and solid wire electrodes, tubular cored wires and tubular cored
electrodes, solid and tubular cored rods and covered electrodes . 1
5.2 Solid strip electrodes . 2
5.3 Cored strip electrodes and thin foils . 2
5.4 Fluxes . 1
6 Rounding procedure . 1
7 Condition of welding consumables. 1
7.1 Covered electrodes . 1
7.2 Wires, rods, and strips . 1
8 Marking . 1
8.1 Marking on the product . 1
8.1.1 Covered electrodes . 1
8.1.2 Wires and strips . 1
8.1.3 Rods . 1
8.2 Marking on the package . 1
9 Packaging . 1
10 Inspection documents . 2
Bibliography . 3


© ISO 2016 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 544:2017
ISO/DIS 544:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO, also take part in
the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO's adherence to the World Trade Organization (WTO)
principles in the Technical Barriers to Trade (TBT) see the following URL:
www.iso.org/iso/foreword.html.
The committee responsible for this document is Technical Committee ISO/TC 44, Welding and allied
processes, Subcommittee SC 3, Welding consumables.
This fourth edition cancels and replaces the third edition (ISO 544:2003), which has been technically
revised.
Requests for official interpretations of any aspect of this International Standard should be directed to
the Secretariat of ISO/TC 44/SC 3 via your national standards body. A complete listing of these bodies
can be found at www.iso.org.

iv © ISO 2016 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 544:2017
ISO/DIS 544:2016(E)
Welding consumables – Technical delivery conditions for filler
materials and fluxes – Type of product, dimensions, tolerances
and markings
1 Scope
This International Standard specifies technical delivery conditions for filler materials and fluxes for
fusion welding.
This International Standard does not apply to other auxiliary materials such as shielding gases.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 14174, Welding consumables — Fluxes for submerged arc welding and electroslag welding —
Classification
ISO 14344, Welding consumables — Procurement of filler materials and fluxes
ISO 80000-1:2009, Quantities and units — Part 1: General. Corrected by ISO 80000-1:2009/Cor 1:2011
3 Terms and definitions
No terms and definitions are listed in this document.
4 Product type and welding process
The types of products covered by this International Standard and the welding process(es) in which they
are used are listed in Table 1.
NOTE The corresponding reference numbers for each welding process in accordance with
[1]
ISO 4063:2009 are given for information.
5 Dimensions and tolerances
5.1 Solid wires and solid wire electrodes, tubular cored wires and tubular cored
electrodes, solid and tubular cored rods and covered electrodes
Dimensions and tolerances for solid wires and solid wire electrodes, tubular cored wires and tubular
cored electrodes, solid and tubular cored rods and covered electrodes are given in Table 2


© ISO 2016 – All rights reserved 1

-------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.