SIST EN ISO 10462:2014/A1:2019
(Amendment)Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment 1 (ISO 10462:2013/Amd 1:2019)
Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment 1 (ISO 10462:2013/Amd 1:2019)
ISO 10462 specifies requirements for the periodic inspection of acetylene cylinders as required for the transport of dangerous goods and for maintenance in connection with periodic inspection. It applies to acetylene cylinders with and without solvent and with a maximum nominal water capacity of 150 l.
Gasflaschen - Acetylenflaschen - Wiederkehrende Inspektion und Wartung - Änderung 1 (ISO 10462:2013/Amd 1:2019)
Bouteilles à gaz - Bouteilles d'acétylène - Contrôle et entretien périodiques - Amendement 1 (ISO 10462:2013/Amd 1:2019)
Plinske jeklenke - Jeklenke za acetilen - Periodična kontrola in vzdrževanje - Dopolnilo A1 (ISO 10462:2013/Amd 1:2019)
ISO 10462 določa zahteve za periodične preglede jeklenk za acetilen, kot se zahteva za prevoz nevarnega blaga, in vzdrževanje v povezavi s periodičnimi pregledi. Velja za jeklenke za acetilen z in brez topil ter z nominalno prostornino vode 150 litrov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10462:2014/A1:2019
01-december-2019
Plinske jeklenke - Jeklenke za acetilen - Periodična kontrola in vzdrževanje -
Dopolnilo A1 (ISO 10462:2013/Amd 1:2019)
Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment
1 (ISO 10462:2013/Amd 1:2019)
Gasflaschen - Acetylenflaschen - Wiederkehrende Inspektion und Wartung - Änderung 1
(ISO 10462:2013/Amd 1:2019)
Bouteilles à gaz - Bouteilles d'acétylène - Contrôle et entretien périodiques -
Amendement 1 (ISO 10462:2013/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 10462:2013/A1:2019
ICS:
23.020.35 Plinske jeklenke Gas cylinders
SIST EN ISO 10462:2014/A1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10462:2014/A1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 10462:2014/A1:2019
EN ISO 10462:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2019
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Acetylene cylinders - Periodic inspection
and maintenance - Amendment 1 (ISO 10462:2013/Amd
1:2019)
Bouteilles à gaz - Bouteilles d'acétylène - Contrôle et Gasflaschen - Acetylenflaschen - Wiederkehrende
entretien périodiques - Amendement 1 (ISO Inspektion und Wartung - Änderung 1 (ISO
10462:2013/Amd 1:2019) 10462:2013/Amd 1:2019)
This amendment A1 modifies the European Standard EN ISO 10462:2013; it was approved by CEN on 26 January 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10462:2013/A1:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10462:2014/A1:2019
EN ISO 10462:2013/A1:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10462:2014/A1:2019
EN ISO 10462:2013/A1:2019 (E)
European foreword
This document (EN ISO 10462:2013/A1:2019) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2020, and conflicting national standards
shall be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10462:2013/Amd 1:2019 has been approved by CEN as EN ISO 10462:2013/A1:2019
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.