SIST EN ISO 17229:2003
(Main)Leather - Physical and mechanical tests - Determination of water vapour absorption (ISO 17229:2002)
Leather - Physical and mechanical tests - Determination of water vapour absorption (ISO 17229:2002)
This European Standard specifies a method for determining the water vapour absorption of leather. The method is applicable for all leathers but is particularly relevant for leathers intended for footwear uppers and linings.
Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wasserdampfaufnahme (ISO 17229:2002)
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Wasserdampfaufnahme von Leder fest. Das Verfahren ist für alle Leder anwendbar, von besonderem Interesse ist es jedoch für Oberleder und Innenfutter von Schuhwerk.
Cuir - Essais physiques et mécaniques - Détermination de l'absorption de vapeur d'eau (ISO 17229:2002)
La présente norme européenne décrit une méthode de détermination de l'absorption de vapeur d'eau par un cuir. La méthode peut etre appliquée a tous les cuirs mais elle présente un intéret tout particulier pour les cuirs destinés a constituer la tige et la doublure des articles chaussants.
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje vpijanja vodne pare (ISO 17229:2002)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Usnje - Fizikalni in mehanski preskusi - Ugotavljanje vpijanja vodne pare (ISO 17229:2002)Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wasserdampfaufnahme (ISO 17229:2002)Cuir - Essais physiques et mécaniques - Détermination de l'absorption de vapeur d'eau (ISO 17229:2002)Leather - Physical and mechanical tests - Determination of water vapour absorption (ISO 17229:2002)59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN ISO 17229:2002SIST EN ISO 17229:2003en01-februar-2003SIST EN ISO 17229:2003SLOVENSKI
STANDARD
SIST EN ISO 17229:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 17229December 2002ICS 59.140.30English versionLeather - Physical and mechanical tests - Determination ofwater vapour absorption (ISO 17229:2002)Cuir - Essais physiques et mécaniques - Détermination del'absorption de vapeur d'eau (ISO 17229:2002)Leder - Physikalische und mechanische Prüfungen -Bestimmung der Wasserdampfaufnahme (ISO17229:2002)This European Standard was approved by CEN on 9 September 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 17229:2002 ESIST EN ISO 17229:2003
EN ISO 17229:2002 (E)2CORRECTED
2003-08-27ForewordThis document (EN ISO 17229:2002) has been prepared by Technical Committee CEN/TC 289"Leather", the secretariat of which is held by UNI, in collaboration with the International Union ofLeather Technologists and Chemists Societies (IULTCS).It is based on Method IUP 42 of the International Union of Leather Technologists and ChemistsSocieties.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by June 2003, and conflicting nationalstandards shall be withdrawn at the latest by June 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of ISO 17229:2002 has been approved by CEN as EN ISO 17229:2002 without anymodifications.NOTE
Normative references to International Standards are listed in Annex ZA (normative).SIST EN ISO 17229:2003
EN ISO 17229:2002 (E)3Annex ZA(normative)Normative references to international publicationswith their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions ofany of these publications apply to this European Standard only when incorporated in it byamendment or revision. For undated references the latest edition of the publication referred toapplies (including amendments).NOTE Where an International Publication has been modified by common modifications, indicatedby (mod.), the relevant EN/HD applies.PublicationYearTitleENYearISO 24182002Leather - Chemical, physicaland mechanical and fastnesstests - Sampling locationEN ISO 24182002ISO 24192002Leather - Physical andmechanical tests - Samplepreparation and conditioningEN ISO 24192002ISO 36961987Water for analytical laboratoryuse - Specification and testmethodsEN ISO 36961995SIST EN ISO 17229:2003
SIST EN ISO 17229:2003
Reference numberISO 17229:2002(E)IULTCS/IUP 42© ISO 2002
INTERNATIONAL STANDARD ISO17229IULTCS/IUP42First edition2002-12-15Leather — Physical and mechanical tests — Determination of water vapour absorption Cuir — Essais physiques et mécaniques — Détermination de l’absorption de vapeur d’eau
SIST EN ISO 17229:2003
ISO 17229:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2002 – All rights reserved
SIST EN ISO 17229:2003
ISO 17229:2002(E) © ISO 2002 – All rights reserved iii Contents Page Foreword.iv
1Scope.12Normative references.13Principle.14Apparatus.15Sampling and sample preparation.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.