Light and Lighting - Lighting system design process

The document specifies steps to be taken in the lighting system design process and lists responsibilities for the implementation and operation of the lighting solution. The aim of the process is:
1)   to design lighting system solutions for sustainable lighting quality based on recommendations in the relevant lighting application standards, for wellbeing of users and for pleasant built environment, and
2)   to ensure that the light requirements are fulfilled with energy efficient solutions (luminaire and control system) with data that can be used in the energy calculations, and
3)   to list the equipment information to be used in the installation, commissioning, operation, maintenance of the lighting system over the years and the decommissioning process, and
4)   to compile the documents defining the designed lighting system solution.
The described lighting system design process applies to all projects of buildings and facilities whether, new or a refurbishment in the lighting sector this includes amongst others the following applications:
-   office buildings - business, communication, design;
-   industry buildings - manufacture, warehouse;
-   outdoor work place areas - shipyards, marshalling yards, timber works;
-   healthcare buildings - hospitals, hospice, residential and elderly care facilities;
-   retail buildings - shops, supermarkets, wholesales establishments;
-   hospitality buildings - bedded areas, meeting rooms, restaurant, café;
-   sports - indoor sports facilities and Outdoor sports fields;
-   education buildings - schools, college, university;
-   roads - traffic routes and conflict areas;
-   amenity areas - cycle paths, residential roads, pedestrian areas;
-   parking areas - indoor and outdoor.
The process does not apply to:
-   specialised lighting systems, (historic buildings, stage, studio, dentist, operating table, etc.);
-   lighting built into machinery or medical equipment;
-   temporary lighting installations.
This technical statement is not applicable to the design of the relevant electrical system and structures.

Licht und Beleuchtung - Planungsprozess für Beleuchtungssysteme

Dieses Dokument legt die beim Planungsprozess für Beleuchtungssysteme auszuführenden Schritte fest und führt alle Verantwortlichkeiten für die Einrichtung und den Betrieb der Beleuchtungslösung auf. Das Ziel dieses Prozesses besteht darin:
1)   Beleuchtungssystemlösungen für nachhaltige Lichtqualität auf der Grundlage von Empfehlungen in den relevanten Normen zur angewandten Lichttechnik, zum Wohlbefinden der Anwender und für ansprechend gebaute Umgebungen zu planen und
2)   mit Daten, die bei den Energieberechnungen verwendet werden können, sicherzustellen, dass die Lichtanforderungen mit energieeffizienten Lösungen (Leuchten und Steuerungssystem) eingehalten werden, und
3)   die Ausrüstungsinformationen aufzuführen, die bei Installation, Inbetriebnahme, Betrieb, Wartung des Beleuchtungssystems im Laufe der Jahre und beim Außerbetriebnahmeprozess zu verwenden sind; und
4)   die Dokumente zusammenzustellen, die die geplante Beleuchtungssystemlösung festlegen.
Der beschriebene Planungsprozess für Beleuchtungssysteme gilt für alle Projekte mit Gebäuden und Anlagen im Beleuchtungssektor, unabhängig davon, ob sie neu gebaut oder saniert werden. Das umfasst unter anderem die folgenden Anwendungen:
-   Bürogebäude - Wirtschaft, Kommunikation, Design;
-   Industriegebäude - Fertigung, Lagergebäude;
-   Arbeitsstätten im Freien - Werften, Rangierbahnhöfe, Holzbauten;
-   Gebäude im Gesundheitswesen - Krankenhäuser, Hospize, stationäre Pflegeeinrichtungen und Altenheime;
-   Geschäftsgebäude - Läden, Supermärkte, Großhandel;
-   Gastgewerbegebäude - Bettenbereiche, Besprechungsräume, Restaurant, Café;
-   Sporteinrichtungen - Sporthallen und Außensportanlagen;
-   Bildungsgebäude - Schulen, berufsbildende Schulen, Hochschulen;
-   Straßen - Verkehrswege und Konfliktzonen;
-   Freizeitgebiete - Radwege, Wohnstraßen, Fußgängerzonen;
-   Parkbereiche - Innen und Außen.
Der Prozess gilt nicht für
-   spezifische Beleuchtungssysteme (historische Gebäude, Bühne, Studio, Zahnarzt, Operationstisch usw.);
-   in Maschinen oder medizinischen Geräten eingebaute Beleuchtung;
-   temporäre Beleuchtungsinstallationen.
Diese technische Spezifikation gilt nicht für die Planung der relevanten elektrischen Systeme und Strukturen.

Lumière et éclairage - Méthode de conception d’un système d’éclairage

Svetloba in razsvetljava - Postopek načrtovanja sistemov za razsvetljavo

Dokument določa korake, ki jih je treba sprejeti v postopku načrtovanja sistemov za razsvetljavo, in navaja odgovornosti za izvedbo in delovanje rešitve razsvetljave. Cilj procesa je:
1) načrtovati rešitve sistemov za trajnostno kakovost razsvetljave, ki temeljijo na priporočilih ustreznih standardov za razsvetljavo, namenjenih za dobro počutje uporabnikov in za prijetno oblikovano okolje,
2) zagotoviti izpolnjevanje zahtev glede svetlobe z energijsko učinkovitimi rešitvami (svetilke in nadzorni sistem) ter s podatki, ki jih je mogoče uporabiti pri izračunih porabe energije,
3) navesti informacije o opremi, ki se bo uporabljala pri namestitvi, zagonu, delovanju, vzdrževanju sistema razsvetljave v prihodnjih letih, in o postopku njegove razgradnje,
4) izdelati dokumente, ki opredeljujejo načrtovani sistem za razsvetljavo.
Opisani postopek načrtovanja sistemov za razsvetljavo velja za vse projekte stavb in objektov, bodisi novih ali obnovljenih, pri čemer gre za sektor razsvetljave za naslednje vrste uporabe:
– poslovne stavbe – poslovanje, komunikacija, projektiranje;
– industrijske stavbe – proizvodnja, skladišče;
– delovna območja na prostem – ladjedelnice, ranžirne postaje, lesne delavnice;
– zdravstvene stavbe – bolnišnice, hospici, stanovanjske stavbe in ustanove za oskrbo starejših;
– maloprodajne stavbe – trgovine, supermarketi, grosistične ustanove;
– gostinske stavbe – prenočišča, sejne sobe, restavracija, kavarna;
– šport – dvoranski športni objekti in športna igrišča na prostem;
– izobraževalne stavbe – šole, akademija, univerza;
– ceste – prometne poti in nevarna območja;
– prometne poti – kolesarske steze, ceste v naseljih, območja za pešce;
– parkirišča – notranja in zunanja.
Ta proces se ne uporablja za:
– specializirane sisteme razsvetljave (zgodovinske stavbe, odre, studie, zobozdravstvene ordinacije, operacijske mize itd.);
– razsvetljavo, vgrajeno v stroje ali medicinsko opremo;
– začasne svetlobne inštalacije.
Ta tehnična izjava se ne uporablja za načrtovanje ustreznega električnega sistema in struktur.

General Information

Status
Published
Publication Date
06-Feb-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Dec-2018
Due Date
03-Mar-2019
Completion Date
07-Feb-2019

Buy Standard

Technical specification
TS CEN/TS 17165:2019 - BARVE
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 17165:2019
01-marec-2019
6YHWOREDLQUD]VYHWOMDYD3RVWRSHNQDþUWRYDQMDVLVWHPRY]DUD]VYHWOMDYR
Light and Lighting - Lighting system design process
Licht und Beleuchtung - Planungsprozess für Beleuchtungssysteme
Lumière et éclairage - Méthode de conception d’un système d’éclairage
Ta slovenski standard je istoveten z: CEN/TS 17165:2018
ICS:
91.160.01 Razsvetljava na splošno Lighting in general
SIST-TS CEN/TS 17165:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 17165:2019

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 17165:2019


CEN/TS 17165
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

December 2018
TECHNISCHE SPEZIFIKATION
ICS 91.160.01
English Version

Light and lighting - Lighting system design process
Lumière et éclairage - Méthode de conception d'un Licht und Beleuchtung - Planungsprozess für
système d'éclairage Beleuchtungssysteme
This Technical Specification (CEN/TS) was approved by CEN on 17 September 2018 for provisional application.

This Technical Specification was corrected and reissued by the CEN-CENELEC Management Centre on 9 January 2019.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17165:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 6
4 Design approach . 10
5 Requirements for design . 11
6 Design process . 12
7 Installation, commissioning and verification . 14
8 Responsibilities . 15
9 Documentation . 16
Annex A (informative) Example listing of lighting design documentation . 17
Annex B (informative) Legislative references (EU) . 23
Annex C (normative) Lighting application standards. 24
Annex D (normative) Lighting product standards . 25
Bibliography . 27

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
European foreword
This document (CEN/TS 17165:2018) has been prepared by Technical Committee CEN/TC 169 “Light
and lighting”, the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
Introduction
Light allows us to see visual tasks and their surrounding area effectively and efficiently in comfort,
safety and security, in all conditions. Furthermore light affects our circadian rhythms, mood, improves
our performance and well-being. A good lighting design will deliver light where and when it is required
at the right level, direction and quality over the required time.
Illumination can be provided by daylight, electric light or by a combination of these two sources
through a well-designed, installed and operated lighting system.
The lighting system design process is an iterative process and this technical specification describes the
key design considerations in the process for a good quality, energy efficient and effective lighting
system for major projects in the tertiary lighting sectors listed in the scope. The final designed lighting
system should provide efficient and effective good quality lighting for the user needs. Good lighting
quality improves quality of life, human health, productivity, comfort and function. The design should
include safety/emergency lighting based on risk assessment or legislation identified during
consultation. Elements of this design process can also be used for smaller lighting schemes.
The full lighting system design process will support implementation of regulatory measures and the
development of verification requirements. In this way it will ensure that the anticipated energy savings
will be met without jeopardising the required lighting conditions.
The lighting system design process is a tool that can be regulated by legislation.
Lighting systems are often subject to input from other design disciplines and shall respect and take into
account the intrinsic requirements and tolerances of other components.
The complete design of a lighting system typically consists of:
— the lighting system design;
— design of the electrical system and structures of the system, as regulated by the legislation in force
and by the applicable International, European and National standards.
This document sets out the general frame of a lighting system design process that can be applied to
lighting of any projects including smart buildings.
4

---------------------- Page: 6 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
1 Scope
This document specifies steps to be taken in the lighting system design process and lists responsibilities
for the implementation and operation of the lighting solution. The aim of the process is:
1) to design lighting system solutions for sustainable lighting quality based on recommendations in
the relevant lighting application standards, for the wellbeing of users and for a pleasant built
environment, and
2) to ensure that the light requirements are fulfilled with energy efficient solutions (luminaire and
control system) with data that can be used in the energy calculations, and
3) to list the equipment information to be used in the installation, commissioning, operation,
maintenance of the lighting system over the years and the decommissioning process, and
4) to compile the documents defining the designed lighting system solution.
The described lighting system design process applies to all projects of buildings and facilities whether,
new or a refurbishment in the lighting sector. This includes amongst others the following applications:
— office buildings – business, communication, design;
— industry buildings – manufacture, warehouse;
— outdoor work place areas – shipyards, marshalling yards, timber works;
— healthcare buildings – hospitals, hospice, residential and elderly care facilities;
— retail buildings – shops, supermarkets, wholesale establishments;
— hospitality buildings – bedded areas, meeting rooms, restaurant, café;
— sports – indoor sports facilities and outdoor sports fields;
— education buildings – schools, colleges, universities;
— roads – traffic routes and conflict areas;
— amenity areas – cycle paths, residential roads, pedestrian areas;
— parking areas – indoor and outdoor.
The process does not apply to:
— specialized lighting systems, (historic buildings, stage, studio, dentist, operating table, etc.);
— lighting built into machinery or medical equipment;
— temporary lighting installations.
This document is not applicable to the design of the relevant electrical system and structures.
5

---------------------- Page: 7 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12665, Light and lighting — Basic terms and criteria for specifying lighting requirements
EN 13201-5, Road lighting — Part 5: Energy performance indicators
EN 15193-1, Energy performance of buildings — Energy requirements for lighting — Part 1:
Specifications, Module M9
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 12665 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1
AECI
D
E
annual energy consumption indicator (of a lighting installation in a specific year)
2
Note 1 to entry: AECI is expressed in kWh/(m ·y).
3.2
client
person who requires and procures the project
3.3
client brief
set of instructions/order by or on behalf of the client for the project
3.4
commissioning engineer
competent person with suitable educational and professional qualifications and relevant experience in
the commissioning of lighting systems
3.5
competent person
person having suitable knowledge, qualification and experience to undertake the required role
3.6
concept philosophy
statement of the design approach
3.7
constraint
fixed item that has to be met during the design process
6

---------------------- Page: 8 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
3.8
design concept
set of fundamental thoughts (including visual and non-visual aspects) at the start of the project and
noting the constraints
Note 1 to entry: Concept design generally takes place after feasibility studies and options appraisals have been
carried out and a project brief has been prepared. The concept design represents the design team's initial
response to the project brief.
3.9
definitive design
based on the indications of the approved design concept and according to the approval of any
competent statutory authority
Note 1 to entry: It contains all the elements required for obtaining the necessary construction permits, and for
verifying the compliance with the city planning laws or other equivalent deeds; it also develops the graphic and
descriptive design documents and the calculations achieving a level of definition which ensures that there are no
significant technical differences or differences in terms of costs in the subsequent working drawing design phase.
3.10
detailed design
detailed implementation of processes scheduled by the design so that every architecture, structure and
plant detail can be clearly defined and make it possible to do
Note 1 to entry: It does not include site operational plans, procurement plans and the calculations and graphics
for any temporary installations and/or structures. The detailed design is fully in compliance with the definitive
design, and with any applicable prescriptions of building regulation or competent statutory authority, if any.
3.11
design criteria
set of requirements to be achieved by the lighting system
3.12
document
drawing or written description of the essential factors created during the design process to be retained
as records
3.13
emergency lighting
lighting provided for use when the supply to the normal lighting fails
3.14
energy efficiency
measure to ensure that the lighting design criteria are met by the efficient use of energy
3.15
feasibility study
set of all elements which are necessary for the design process to be completed
Note 1 to entry: The purpose of design concept is to present an overview of necessary information for making
decisions about the technical and organizational feasibility of the design, the benefits, costs, risks and deadlines, so
implementing the design concept and outlining the process from the initial phase to the final one.
7

---------------------- Page: 9 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
3.16
identifier
code or description that uniquely identifies a place, product (or a component of a) service
3.17
illumination
process of lighting
3.18
installation
process of installing the lighting system
3.19
installation engineer
competent person with suitable educational and professional qualifications and relevant experience in
the mechanical and electrical installation of lighting systems
3.20
Lighting Energy Numeric Indicator
LENI
numeric indicator of the annual energy requirement for the lighting system in the project normalised to
the useable area of the project
2
Note 1 to entry: LENI is expressed in kWh/(m ·y).
3.21
lighting control system
system consisting of devices that control the lighting installation, luminaire or light source to adjust the
Iight output
Note 1 to entry: The devices can be operated manually or automatically and can include relevant detection
devices.
Note 2 to entry: The lighting control system can dim to an appropriate level, be daylight linked to harvest free
daylight, utilise occupancy detection to respond to presence, adjust for specific activities using scene setting,
algorithmic control, etc.
3.22
lighting installation
lighting solution installed in the project
3.23
lighting scheme drawing
annotated plan, section, detail or layout diagram describing the lighting solution
3.24
lighting system solution
lighting equipment or lighting solution (lamps, ballast, luminaire and controls) required for the lighting
scheme, its installation and operation during the life of the scheme
3.25
lighting system
lighting solution including products, scheme and operation instructions
8

---------------------- Page: 10 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
3.26
lighting system design
taken to be a product consisting of a set of documentation approved by the lighting system designer
detailing the information used and the solution proposed for the project
3.27
lighting system designer
competent person with suitable educational and professional qualifications and relevant experience in
lighting system design able to manage both the technical and aesthetic issues of a project
Note 1 to entry: Where a team of designers is used the lighting system designer is the person with overall lighting
design responsibility.
3.28
maintenance
routine process to keep the lighting system operating through life according to design intent
3.29
operation
functioning of the lighting system
3.30
operating regime
way the lighting system should be operated
3.31
project
building or place or activity area requiring the lighting system
3.32
project information
sum of all information required to produce the lighting system design
Note 1 to entry: The information can come from discussion and input from project manager, architect, etc. and
agreed with the client.
3.33
project brief
project detail as agreed and specified in the client brief for fulfilment by the lighting system designer
3.34
product equivalent

product with identical characteristics in terms of type (aesthetics), style (colour of the light and
embodied lighting technology) and performance (quantities and energy)
3.35
power demand
sum of the power required for all the installed lighting products normalised to the useable area of the
project
2
Note 1 to entry: The power demand is expressed in W/m .
9

---------------------- Page: 11 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
3.36
useful area
total floor area (in buildings) or ground area (outdoor) of the project that requires illumination
Note 1 to entry: It can consist of all the areas (summed up) for the project to which lighting has to be provided.
2
Note 2 to entry: The useful area is expressed in m .
3.37
verification engineer
competent person with suitable educational and professional qualifications and relevant experience in
the verification of lighting systems
4 Design approach
A well-designed lighting system brings together:
— the requirements of the visual task(s), carried out by the users of the space;
— the requirements of people, moving through the space;
— the requirements for escape lighting where needed;
— the acceptance of constraints imposed by the client or physical nature of the space;
— the requirements for the environment and sustainability;
— the opportunities provided by the space, for example:
— possibilities to ease and simplify installation and maintenance;
— availability of daylight;
— occupancy patterns;
— surface finishes;
— issues of form, composition and style;
— consideration of different options for the space;
— the requirements of the human concerning non-visual, emotional and biological aspects of light.
By combining the best choice of luminaires and available daylight with the best control strategy to
match the space and tasks, and by providing flexibility in the lighting scheme to allow the lighting to be
varied according to user requirements, energy savings may be made whilst providing a safe and
comfortable environment. In buildings the designer has to consider the options for daylight supply
through suitably located windows and/or rooflights and appropriate shading to avoid glare and
overheating.
A well-designed lighting system should be simple to use and maintain. If the users of the space are well
trained in its operation and use and simple maintenance routines set out then the potential energy
savings through the life of the installation will be realized.
10

---------------------- Page: 12 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
For this to happen it is necessary to determine energy efficiency based upon energy usage throughout a
year (LENI according to EN 15193-1 and AECI according to EN 13201-5) as opposed to installed load or
equivalent, as installed load does not correctly account for dimming and switching in response to
available daylight, occupant needs and occupancy patterns.
A well-designed lighting system should include:
— lighting of the task and surroundings to ensure efficient and effective performance;
— lighting of the space to ensure a comfortable and pleasant environment to work, stay and live in;
— lighting of the space to ensure safety, health and well-being at all material times i.e. during normal
occupancy or emergency conditions;
— minimizing lighting energy requirements through life. The energy requirements should be
minimized through prudent design, installation, operation and maintenance;
— control of the life-cycle-costs of the lighting system. Minimizing capital and operational costs
through cost effective design, equipment selection, installation, operation and maintenance
procedures.
In all cases European standards shall be used where they exist as a basis to allow verification of claims.
5 Requirements for design
The lighting system should be designed by the lighting system designer usually appointed by the client
and/or their representative. The designed lighting system will:
— fulfil the clients brief, unless this is varied with their agreement during design development;
— conform to the criteria set by the relevant lighting application standards;
— shall consider both the task(s) being performed and the age and ability profile(s) of expected
occupants and conform to the lighting criteria set for surrounding areas around tasks;
— meet all legal requirements including the selection of approved products fit for purpose;
— shall take into account the risks associated with health and safety during installation and
installation should be according to EU Directive 92/57/EEC;
— the designer shall cooperate with other designers to ensure coordination of harmonized design and
agree compromises of product selections and locations in the desired installed places;
— the designer shall include recommendation for a maintenance regime based on the criteria used to
select the maintenance factors used when designing the lighting systems;
— the designer should ensure that any necessary variation to the initial design do not adversely or
materially affect the quality of the lighting design and should agree to these changes or seek a
deviation document listing the changes.
In addition the designer shall consider how to fulfil these requirements in a manner that provides a
comfortable and appropriate visual environment.
The client brief can contain other instructions for the project completion such as deliverables,
verification processes and approval criteria. It is recommended, that in some cases the maintenance
11

---------------------- Page: 13 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
factor is defined in cooperation with persons responsible for maintenance and cleaning according to
their requirements.
The lighting system designer can also agree a brief with the client to set out the requirements of the
users of the space, time scales, etc. as needed.
The criteria for the required illumination for places in the tertiary lighting sector are well defined in the
various European lighting application standards. A list of relevant lighting standards is given in
Annex C. In lighting design the latest published versions shall be used.
The lighting system designer shall work to the standard of good practice. The designer should ensure
that the right lighting is provided by the lighting system that is energy efficient, economic and fit for
purpose. For energy efficient lighting system the luminaires should be combined with lighting controls
to form an integral solution. Such solutions will allow the delivered light output, particularly in
multipurpose rooms or areas, to be configured to the task or environment requirements.
The lighting design of a multi-disciplinary project should be carried out at the same time as the design
of the project as a whole.
6 Design process
The complete lighting system design is an iterative process in which inputs may change such as:
— the client’s brief;
— the feasibility study and concept options;
— design assumptions;
— data on the physical project location including any specific design constraints;
— the selection of the lighting criteria;
— lighting solution options including the provision of emergency lighting where required.
The project completion documentation and recorded working files should include:
— project documents;
— design assumptions (of the lighting system designer);
— the summary statement of the concept philosophy;
— lighting scheme drawings;
— all necessary information of the specified products of the lighting system (luminaires, lamps,
sensors, controls and performance data, etc.);
— lighting/energy/economic calculations in accordance with relevant standards;
— instructions for installation, commissioning, operation and maintenance.
An example of a comprehensive design process and accompanied listing of documentation for indoor
work place lighting is provided in Annex A. For other sectors a similar set of steps and documentation to
the model listing of lighting design documentation shown in Annex A can be produced.
12

---------------------- Page: 14 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
The design assumptions whilst treated as an input into the system design shall also be documented as
an output if they are defined by the lighting system designer. Some information can be provided by the
product supplier and the installing contractor.
The completion documents shall form the Product of the lighting system design.

Figure 1 — Lighting system design process and documentation
In general the client defines the project content and provides architectural drawings and the type of
working conditions of the site and facilities. The designer should identify the constraints such as local
regulations, health and occupational legislations and fixed items. For refurbishment projects the
information may be dated so the lighting system designer may also have to make site surveys and
prepare initial site drawings.
The project may consist of a single element such as an open plan office or may be a building complex
having many diverse activity areas such as found in a hospital. In the execution of the lighting system
design for the project the lighting designer can deal with each element separately and can sum up the
solutions and the energy requirements of the elements of the project and conclude the design with the
production of a comprehensive project information document as indicated in Figure 1.
1) The lighting system should be designed by a person competent in lighting system design.
2) The lighting system shall take account of all relevant legislation (see Annex B).
3) The lighting system shall conform to the requirements recommended in the relevant lighting
applications standards (see Annex C). These requirements shall be adjusted where necessary to
account for task difficulty and observer capability. They shall, as far as is possible, ensure safety
within the space at all material times.
4) The lighting system shall use lighting products conforming to the relevant product standards (see
Annex D). However, the designer may explore new techniques and innovative solutions not yet
standardized and shall give written justification.
5) The availability of daylight and occupancy patterns within the space shall be determined. Based
upon these the lighting system shall include suitable lighting control equipment.
13

---------------------- Page: 15 ----------------------

SIST-TS CEN/TS 17165:2019
CEN/TS 17165:2018 (E)
6) The designer should ensure that the concept philosophy and the lighting system design embraces
best practice. (Best practice is mostly defined in relevant standards.)
7) The designer should ensure that the energy requirements for the lighting system is minimized but
shall make adequate allowance to provide for flexibility in the use of the lighting for different task
or activity areas by the designed and installed lighting control functions.
8) The designer should list all assumptions and provide a list of identifiers and information on the
concept philosophy, product data and maintenance factor used in the lighting system design
process for the project.
9) The designer should provide lighting scheme drawings for installation of the lighting solution for
the different areas in the project. The designer if required should check that the installer supplies
and i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.