SIST EN IEC 62453-71:2024
(Main)Field device tool (FDT) interface specification - Part 71: OPC UA Information Model for FDT (IEC 62453-71:2023)
Field device tool (FDT) interface specification - Part 71: OPC UA Information Model for FDT (IEC 62453-71:2023)
IEC 62453-71:2023 specifies an OPC UA Information Model to represent the device information based on FDT-defined device integration.
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 71: OPC UA Information Modell für FDT (IEC 62453-71:2023)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 71: Modèle d’information de l’OPC UA pour outils FDT
L’IEC 62453-71:2023 spécifie un modèle d’information de l’OPC UA pour représenter les informations des dispositifs, basé sur l’intégration du dispositif définie pour un outil FDT.
Specifikacija vmesnika orodja procesne naprave - 71. del: OPC UA informacijski model za orodje procesne naprave (IEC 62453-71:2023)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62453-71:2024
01-april-2024
Specifikacija vmesnika orodja procesne naprave - 71. del: OPC UA informacijski
model za orodje procesne naprave (IEC 62453-71:2023)
Field device tool (FDT) interface specification - Part 71: OPC UA Information Model for
FDT (IEC 62453-71:2023)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 71: OPC UA Information Modell
für FDT (IEC 62453-71:2023)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 71: Modèle
d’information de l’OPC UA pour outils FDT
Ta slovenski standard je istoveten z: EN IEC 62453-71:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN IEC 62453-71:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62453-71:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 62453-71:2024
EUROPEAN STANDARD EN IEC 62453-71
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 25.040
English Version
Field device tool (FDT) interface specification - Part 71: OPC UA
Information Model for FDT
(IEC 62453-71:2023)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 71:
terrain (FDT) - Partie 71: Modèle d'information de l'OPC UA OPC UA Information Modell für FDT
pour outils FDT (IEC 62453-71:2023)
(IEC 62453-71:2023)
This European Standard was approved by CENELEC on 2023-12-06. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62453-71:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62453-71:2024
EN IEC 62453-71:2023 (E)
European foreword
The text of document 65E/806/CDV, future edition 1 of IEC 62453-71, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62453-71:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-06
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-06
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62453-71:2023 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62453-71:2024
EN IEC 62453-71:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
appli
...
SLOVENSKI STANDARD
oSIST prEN IEC 62453-71:2022
01-januar-2022
Specifikacija vmesnika orodja procesne naprave - 71. del: OPC UA informacijski
model za orodje procesne naprave
Field device tool (FDT) interface specification - Part 71: OPC UA Information Model for
FDT
Ta slovenski standard je istoveten z: prEN IEC 62453-71:2021
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
oSIST prEN IEC 62453-71:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62453-71:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62453-71:2022
65E/806/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62453-71 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-11-19 2022-02-11
SUPERSEDES DOCUMENTS:
65E/766/CD, 65E/782/CC
IEC SC 65E : DEVICES AND INTEGRATION IN ENTERPRISE SYSTEMS
SECRETARIAT: SECRETARY:
United States of America Mr Donald (Bob) Lattimer
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 65C
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Field device tool (FDT) interface specification – Part 71: OPC UA Information Model for FDT
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
Public
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62453-71:2022
2 IEC CDV 62453-71 © IEC:2021
1 CONTENTS
2
3 FOREWORD . 7
4 INTRODUCTION . 9
5 0.1 General . 9
6 0.2 Introduction to FDT . 9
7 0.3 Introduction to OPC Unified Architecture . 9
8 0.4 Introduction to OPC UA Device Integration . 10
9 1 Scope . 12
10 2 Normative references . 12
11 3 Terms, definitions, and abbreviations . 12
12 3.1 Terms and definitions. 12
13 3.2 Abbreviations and symbols . 12
14 4 Conventions used in this document . 13
15 4.1.1 Document conventions . 13
16 4.1.2 Conventions for FDT methods . 13
17 4.1.3 Conventions for Node descriptions . 13
18 4.1.4 NodeIds and BrowseNames . 17
19 4.1.5 Common Attributes . 17
20 4.1.6 Graphical Notation .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.