Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM) (ISO/IEEE 11073-10425:2019)

This standard establishes a normative definition of communication between personal health continuous
glucose monitor (CGM) devices (agents) and managers (e.g., cell phones, personal computers, personal
health appliances, set top boxes) in a manner that enables plug-and-play interoperability. It leverages work
done in other ISO/IEEE 11073 standards including existing terminology, information profiles, application
profile standards, and transport standards. It specifies the use of specific term codes, formats, and behaviors
in telehealth environments, restricting optionality in base frameworks in favor of interoperability. This
standard defines a common core of communication functionality of CGM devices. In this context, CGM
refers to the measurement of the level of glucose in the body on a regular (typically 5 minute) basis through
a sensor continuously attached to the person.

Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit - Teil 10425: Gerätespezifikation - Kontinuierlicher Glukose-Monitor (ISO/IEEE 11073-10425:2019)

Informatique de santé - Communication entre dispositifs de santé personnels - Partie 10425: Spécialisation du dispositif - Glucomètre continu (CGM) (ISO/IEEE 11073-10425:2019)

La présente norme établit une définition normative de la communication entre des dispositifs de santé personnels (agents) du type glucomètre continu (CGM) et des gestionnaires (par exemple, téléphones cellulaires, ordinateurs personnels, équipements de santé personnels et boîtiers décodeurs) d'une manière qui permet une interopérabilité du type prêt à l'emploi. Elle s'appuie sur le travail réalisé dans d'autres normes ISO/IEEE 11073, notamment la terminologie, les modèles d'informations, les normes de profils d'applications et les normes de transport. Elle spécifie l'utilisation de codes, de formats et de comportements liés à des termes spécifiques dans les environnements de télésanté, en limitant les choix à des cadres de travail de base favorisant l'interopérabilité. La présente norme définit un noyau commun de fonctionnalités de communication pour les dispositifs CGM. Dans ce contexte, CGM désigne la mesure régulière du niveau de glucose dans l'organisme (généralement toutes les 5 minutes) par le biais d'une sonde fixée en permanence sur la personne.

Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10425. del: Specialne naprave - Stalno spremljanje ravni glukoze (ISO/IEEE 11073-10425:2019)

Ta standard določa normativno opredelitev komunikacije med osebnimi medicinskimi pripomočki za stalno spremljanje ravni glukoze (agenti) in upravljalnimi napravami (npr. mobilnimi telefoni, osebnimi računalniki, osebnimi medicinskimi pripomočki, digitalnimi sprejemniki) na način, ki omogoča interoperabilnost s takojšnjim učinkom (»vstavi in poženi«). Standard temelji na delu, doseženem v drugih standardih ISO/IEEE 11073, vključno z obstoječo terminologijo, informacijskimi profili, standardi za profile aplikacije in standardi za prevoz. Določa uporabo posebnih kod izrazov, formatov in vedenj v telemedicinskih okoljih, kjer v korist interoperabilnosti omejuje izbirnost osnovnih okvirov. Ta standard določa skupno jedro komunikacijske funkcionalnosti za naprave za stalno spremljanje ravni glukoze. V tem kontekstu se stalno spremljanje ravni glukoze navezuje na redno merjenje ravni glukoze v telesu (običajno na 5 minut) s senzorjem, ki je stalno pritrjen na osebo.

General Information

Status
Published
Public Enquiry End Date
02-Dec-2018
Publication Date
14-May-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-Apr-2019
Due Date
04-Jul-2019
Completion Date
15-May-2019

Relations

Buy Standard

Standard
EN ISO 11073-10425:2019
English language
86 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 11073-10425:2018
English language
84 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11073-10425:2019
01-junij-2019
Nadomešča:
SIST EN ISO 11073-10425:2017
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10425. del:
Specialne naprave - Stalno spremljanje ravni glukoze (ISO/IEEE 11073-10425:2019)
Health informatics - Personal health device communication - Part 10425: Device
specialization - Continuous glucose monitor (CGM) (ISO/IEEE 11073-10425:2019)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 10425: Gerätespezifikation - Kontinuierlicher Glukose-Monitor (ISO/IEEE 11073-
10425:2019)
Informatique de santé - Communication entre dispositifs de santé personnels - Partie
10425: Spécialisation du dispositif - Glucomètre continu (CGM) (ISO/IEEE 11073-
10425:2019)
Ta slovenski standard je istoveten z: EN ISO 11073-10425:2019
ICS:
11.040.55 Diagnostična oprema Diagnostic equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST EN ISO 11073-10425:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11073-10425:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 11073-10425:2019


EN ISO 11073-10425
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2019
EUROPÄISCHE NORM
ICS 35.240.80 Supersedes EN ISO 11073-10425:2016
English Version

Health informatics - Personal health device
communication - Part 10425: Device specialization -
Continuous glucose monitor (CGM) (ISO/IEEE 11073-
10425:2019)
Informatique de santé - Communication entre Medizinische Informatik - Kommunikation von Geräten
dispositifs de santé personnels - Partie 10425: für die persönliche Gesundheit - Teil 10425:
Spécialisation du dispositif - Glucomètre continu Gerätespezifikation - Kontinuierlicher Glukose-Monitor
(CGM) (ISO/IEEE 11073-10425:2019) (ISO/IEEE 11073-10425:2019)
This European Standard was approved by CEN on 22 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-10425:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11073-10425:2019
EN ISO 11073-10425:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11073-10425:2019
EN ISO 11073-10425:2019 (E)
European foreword
This document (EN ISO 11073-10425:2019) has been prepared by Technical Committee ISO/TC 215
"Health informatics" in collaboration with Technical Committee CEN/TC 251 “Health informatics” the
secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11073-10425:2016.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-10425:2019 has been approved by CEN as EN ISO 11073-10425:2019
without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 11073-10425:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 11073-10425:2019
INTERNATIONAL ISO/IEEE
STANDARD 11073-10425
Second edition
2019-03
Health informatics — Personal health
device communication —
Part 10425:
Device specialization — Continuous
glucose monitor (CGM)
Informatique de santé — Communication entre dispositifs de santé
personnels —
Partie 10425: Spécialisation du dispositif — Glucomètre continu (CGM)
Reference number
ISO/IEEE 11073-10425:2019(E)
©
IEEE 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 11073-10425:2019
ISO/IEEE 11073-10425:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© IEEE 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Published in Switzerland
ii © IEEE 2018 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 11073-10425:2019
ISO/IEEE 11073-10425:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non‐governmental, in liaison with ISO, also take part
in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE‐SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve
the final product. Volunteers are not necessarily members of the Institute and serve without
compensation. While the IEEE administers the process and establishes rules to promote fairness in
the consensus development process, the IEEE does not independently evaluate, test, or verify the
accuracy of any of the information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction
and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does
not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html.
ISO/IEEE 11073‐10425 was prepared by the IEEE 11073 Standards Committee of the IEEE
Engineering in Medicine and Biology Society (as IEEE Std 11073‐10425‐2017) and drafted in
accordance with its editorial rules. It was adopted, under the “fast‐track procedure” defined in the
Partner Standards Development Organization cooperation agreement between ISO and IEEE, by
Technical Committee ISO/TC 215, Health informatics.
This second edition cancels and replaces the first edition (ISO/IEEE 11073‐10425:2016), which has
been technically revised.
A list of all parts in the ISO 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2018– All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 11073-10425:2019
ISO/IEEE 11073-10425:2019(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, a normative definition of the communication between continuous glucose monitor
(CGM) devices and managers (e.g., cell phones, personal computers, personal health appliances,
set top boxes), in a manner that enables plug-and-play interoperability, is established in this
standard. It leverages appropriate portions of existing standards including ISO/IEEE 11073
terminology and information models. It specifies the use of specific term codes, formats, and
behaviors in telehealth environments, restricting optionality in base frameworks in favor of
interoperability. This standard defines a common core of communication functionality of CGM
devices. In this context, CGM refers to the measurement of the level of glucose in the body on a
regular (typically 5 minute) basis through a sensor continuously attached to the person.
Keywords: continuous glucose monitor, IEEE 11073-10425™, medical device communication,
personal health devices
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2018 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 25 January 2018. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
PDF: ISBN 978-1-5044-4293-0 STD22759
Print: ISBN 978-1-5044-4294-7 STDPD22759
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
2
Copyright © 2018 IEEE. All rights reserved.

---------------------- Page: 10 ----------------------

SIST EN ISO 11073-10425:2019
ISO/IEEE 11073-10425:2019(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
3
Copyright © 2018 IEEE. All rights reserved.

---------------------- Page: 11 ----------------------

SIST EN ISO 11073-10425:2019
ISO/IEEE 11073-10425:2019(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
4
Copyright © 2018 IEEE. All rights reserved.

---------------------- Page: 12 ----------------------

SIST EN ISO 11073-10425:2019
ISO/IEEE 11073-10425:2019(E)
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten
years old and has not undergone a revision process, it is reasonable to conclude that its contents, although
still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to
determine that they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at
http://ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the
IEEE-SA or IEEE’s standards development process, visit the IEEE-SA Website at http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL:
http://standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE-SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.
5
Copyright © 2018 IEEE. All rights reserved.

---------------------- Page: 13 ----------------------

SIST EN ISO 11073-10425:2019
ISO/IEEE 11073-10425:2019(E)
Participants
At the time this standard was submitted to the IEEE-SA Standards Board for approval, the Personal Health
Device Working Group had the following membership:
Daidi Zhong, Chair
Michael J. Kirwan, Chair
Nathaniel M. Hamming, Vice Chair
Akib Uddin, Vice Chair
Karsten Aalders Seungchul Chae Ken Fuchs
Charles R. Abbruscato Rahul Chauhan Jing Gao
Nabil Abujbara James Cheng Xuemei Gao
Maher Abuzaid Peggy Chien Marcus Garbe
James Agnew David Chiu John Garguilo
Haidar Ahmad Jinyong Choi Rick Geimer
Manfred Aigner Chia-Chin Chong Igor Gejdos
Jorge Alberola Saeed A. Choudhary Ferenc Gerbovics
Murtaza Ali Jinhan Chung Nicolae Goga
Rolf Ambuehl Malcolm Clarke Julian Goldman
David Aparisi John A. Cogan Raul Gonzalez Gomez
Paolo Ariano John T. Collins Chris Gough
Lawrence Arne Cory Condek Channa Gowda
Diego B. Arquillo Todd H. Cooper Charles M. Gropper
Serafin Arroyo David Cornejo Amit Gupta
Muhammad Asim Douglas Coup Jeff Guttmacher
Merat Bagha Rasmus Haahr
Nigel Cox
Doug Baird Hans Crommenacker Christian Habermann
David Baker Tomio Crosley Michael Hagerty
Anindya Bakshi Allen Curtis Jerry Hahn
Ananth Balasubramanian Ndifor Cyril Fru Robert Hall
Sunlee Bang Jesús Daniel Trigo Rickey L. Hampton
M. Jonathan Barkley Eyal Dassau Sten Hanke
Gilberto Barrón David Davenport Aki Harma
David Bean Russell Davis Jordan Hartmann
John Bell Sushil K. Deka Kai Hassing
Rudy Belliardi Ciro de la Vega Marc Daniel Haunschild
Kathryn M. Bennett Pedro de-las-Heras-Quiros Wolfgang Heck
Daniel Bernstein Jim DelloStritto Nathaniel Heintzman
George A. Bertos Matthew d’Entremont Charles Henderson
Chris Biernacki Kent Dicks Jun-Ho Her
Ola Björsne Hyoungho Do Helen B. Hernandez
Thomas Blackadar Alistair Donaldson Takashi Hibino
Marc Blanchet Xiaolian Duan
Timothy L. Hirou
Thomas Bluethner Brian Dubreuil Allen Hobbs
Douglas P. Bogia Sourav Dutta Alex Holland
Xavier Boniface Jakob Ehrensvard Arto Holopainen
Shannon Boucousis Fredrik Einberg Kris Holtzclaw
Julius Broma Michihiro Enokida Robert Hoy
Lyle G. Bullock Javier Escayola Calvo Frank Hsu
Bernard Burg Mark Estes Anne Huang
Chris Burns Leonardo Estevez Sen-Der Huang
Anthony Butt Roger Feeley Zhiqiang Huang
Jeremy Byford-Rew Hailing Feng Ron Huby
Satya Calloji Bosco T. Fernandes David Hughes
Xiaoying Cao Christoph Fischer Robert D. Hughes
Carole C. Carey Morten Flintrup Jiyoung Huh
Craig Carlson Joseph W. Forler Hugh Hunter
Santiago Carot-Nemesio Russell Foster Hitoshi Ikeda
Randy W. Carroll Eric Freudenthal Yutaka Ikeda
Matthias Frohner
Simon Carter Philip O. Isaacson
6
Copyright © 2018 IEEE. All rights reserved.

---------------------- Page: 14 ----------------------

SIST EN ISO 11073-10425:2019
ISO/IEEE 11073-10425:2019(E)
Atsushi Ito Jinsei Miyazaki Mark G. Schnell
Michael Jaffe Erik Moll Richard A. Schrenker
Praduman Jain
Darr Moore Antonio Scorpiniti
Wei Jin Carsten Mueglitz Kwang Seok Seo
Danny Jochelson Piotr Murawski Riccardo Serafin
Phaneeth Junga Soundharya Nagasubramanian Sid Shaw
Akiyoshi Kabe Jae-Wook Nah Frank Shen
Steve Kahle Alex Neefus Bozhi Shi
Tomio Kamioka Trong-Nghia Nguyen-Dobinsky Min Shih
James Jin Kang Michael E. Nidd Mazen Shihabi
Kei Kariya Tetsu Nishimura Redmond Shouldice
Andy Kaschl Jim Niswander Sternly K. Simon
Junzo Kashihara Hiroaki Niwamoto Marjorie Skubic
Kohichi Kashiwagi Thomas Norgall Robert Smith
Ralph Kent Anand Noubade Ivan Soh
Laurie M. Kermes Yoshiteru Nozoe Motoki Sone
Ikuo Keshi Abraham Ofek Emily Sopensky
Junhyung Kim Brett Olive Rajagopalan Srinivasan
Minho Kim Begonya Otal Andreas Staubert
Min-Joon Kim Nicholas Steblay
Marco Paleari
Taekon Kim Charles Palmer Lars Steubesand
Tetsuya Kimura Bud Panjwani John (Ivo) Stivoric
Alfred Kloos Carl Pantiskas Raymond A. Strickland
Jeongmee Koh Harry P. Pappas Chandrasekaran Subramaniam
Jean-Marc Koller Hanna Park Hermanni Suominen
John Koon Jong-Tae Park Lee Surprenant
Patty Krantz Myungeun Park Ravi Swami
Raymond Krasinski Soojun Park Ray Sweidan
Alexander Kraus Phillip E. Pash Jin Tan
Ramesh Krishna TongBi Pei Yi Tang
Geoffrey Kruse Lucian Pestritu Haruyuyki Tatsumi
Falko Kuester Soren Petersen John W. Thomas
Rafael Lajara James Petisce Jonas Tirén
Pierre Landau Peter Piction Alexandra Todiruta
Jaechul Lee Michael Pliskin Janet Traub
JongMuk Lee Varshney Prabodh Gary Tschautscher
Masato Tsuchid
Kyong Ho Lee Jeff Price
Rami Lee Harald Prinzhorn Ken Tubman
Sungkee Lee Harry Qiu Yoshihiro Uchida
Woojae Lee Arif Rahman Sunil Unadkat
Yonghee Lee Tanzilur Rahman Fabio Urbani
Joe Lenart Steve Ray Philipp Urbauer
Kathryn A. Lesh Phillip Raymond Laura Vanzago
Catherine Li Tim Reilly Alpo Värri
Qiong Li Barry Reinhold Dalimar Velez
Patrick Lichter Brian Reinhold Rudi Voon
Jisoon Lim Melvin I. Reynolds Barry Vornbrock
Joon-Ho Lim John G. Rhoads Isobel Walker
John Lin Jeffrey S. Robbins David Wang
Wei-Jung Lo Chris Roberts Jerry P. Wang
Charles Lowe Moskowitz Robert Yao Wang
Don Ludolph Timothy Robertson Yi Wang
Christian Luszick David Rosales Steve Warren
Bob MacWilliams Fatemeh Saki Fujio Watanabe
Srikkanth Madhurbootheswaran Bill Saltzstein Toru Watsuji
Miriam L. Makhlouf Benedikt Salzbrunn Mike Weng
Romain Marmot Giovanna Sannino Kathleen Wible
Sandra Martinez Jose A. Santos-Cadenas Paul Williamson
Miguel Martínez de Espronceda Stefan Sauermann Jan Wittenber
Cámara John Sawyer Jia-Rong Wu
Peter Mayhew Guillaume Schatz Will Wykeham
Jim McCain Alois Schloegl Ariton Xhafa
László Meleg Paul S. Schluter Dan Xiao
Alexander Mense Lars Schmitt Yaxi Yan
7
Copyright © 2018 IEEE. All rights reserved.

---------------------- Page: 15 ----------------------

SIST EN ISO 11073-10425:2019
ISO/IEEE 11073-10425:2019(E)
Qifeng Yan Qiang Yin Zhiqiang Zhang
Junjie Yang Done-Sik Yoo Thomas Zhao
Ricky Yang Jianchao Zeng Miha Zoubek
Melanie S. Yeung Jason Zhang Szymon Zyskoter
The following members of the individual balloting committee voted on this standard. Balloters may have
voted for approval, disapproval, or abstention.
Charles Barest Nathaniel M. Hamming Paul Schluter
Lyle G. Bullock
Werner Hoelzl Steven Smith
Craig Carlson Noriyuki Ikeuchi Walter Struppler
Malcolm Clarke Atsushi Ito Karl Weber
David Fuschi Piotr Karocki Jan Wittenber
Randall Groves Joerg-Uwe Meyer Or
...

SLOVENSKI STANDARD
oSIST prEN ISO 11073-10425:2018
01-november-2018
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10425. del:
Specialne naprave - Stalno spremljanje ravni glukoze (ISO/IEEE/FDIS 11073-
10425:2018)
Health informatics - Personal health device communication - Part 10425: Device
specialization - Continuous glucose monitor (CGM) (ISO/IEEE/FDIS 11073-10425:2018)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 10425: Gerätespezifikation - Kontinuierlicher Glukose-Monitor (ISO/IEEE/FDIS
11073-10425:2018)
Informatique de santé - Communication entre dispositifs de santé personnels - Partie
10425: Spécialisation du dispositif - Glucomètre continu (CGM) (ISO/IEEE/FDIS 11073-
10425:2018)
Ta slovenski standard je istoveten z: prEN ISO 11073-10425
ICS:
11.040.55 'LDJQRVWLþQDRSUHPD Diagnostic equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
oSIST prEN ISO 11073-10425:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11073-10425:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11073-10425:2018
FFIINANALL
IINNTTEERRNNAATTIIOONNAAL L ISO/IEEE/
DDRRAAFFTT
SSTTAANNDDAARRDD FDIS
11073-10425
215
Health informatics — Personal health
SeSeccrretariatetariat: ANSI: ANSI
device communication —
VVoting begins on:oting begins on:
20201188--09-03
Part 10425:
VVotioting ng tteerrmmiinnaatteess oonn::
Device specialization — Continuous
20201199--0101--21
glucose monitor (CGM)
Informatique de santé — Communication entre dispositifs de santé
personnels —
Partie 10425: Spécialisation du dispositif — Glucomètre continu (CGM)
This document is circulated as received from the committee secretariat.
FAST TRACK PROCEDURE
ISO/CEN PARALLEL PROCESSING
RERECCIIPPIEIENTNTSS OOFF TTHHISIS DDRARAFTFT AREARE IINNVVIITTEEDD TTO O
PROOF/ÉPREUVE
SSUUBMIBMITT,, WIWITTHH THTHEIREIR CCOMMEOMMENTNTS,S, NNOOTTIIFFIICCAATTIOION N
OOFF AANNYY RERELLEEVVAANTNT PPAATTEENTNT RIRIGGHHTTSS OOFF WWHHIICCH H
TTHHEYEY AREARE AAWWAREARE AANDND TTOO PPROROVVIIDDEE SSUPPUPPOORR T TIINNG G
DDOOCCUUMEMENNTTAATTIOIONN.
IINN AADDDDIITTIOIONN TTOO TTHHEIREIR EEVVAALLUUAATTIOIONN AAS S
Reference number
BEIBEINGNG AACCCCEEPPTTABABLLEE FFOROR IINDUNDUSSTTRIARIALL,, TTEECCHHNNOO--
ISO/IEEE FDIS 11073-10425:2018(E)
LLOOGGIICCAALL,, CCOMMEOMMERCRCIAIALL AANDND UUSERSER PUPURRPPOSESOSES, ,
DDRARAFFTT IINTNTERERNANATTIOIONANALL SSTTAANNDDARARDDSS MMAAYY OON N
OOCCCCAASIOSIONN HHAAVVEE TTOO BEBE CCOONNSISIDDEREEREDD IINN TTHHE E
LLIIGGHHTT OOFF TTHHEIREIR PPOOTTEENTNTIAIALL TTOO BEBECCOMEOME SSTTAANN--
©
IEEE 2018
DDARARDDSS TTOO WHIWHICCHH REREFFEREERENCNCEE MMAAYY BEBE MAMADDEE IIN N
NANATTIOIONANALL RE REGULGULAATTIOIONNSS.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE FDIS 11073-10425:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© IEEE 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii © IEEE 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE FDIS 11073-10425:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non‐governmental, in liaison with ISO, also take part
in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE‐SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve
the final product. Volunteers are not necessarily members of the Institute and serve without
compensation. While the IEEE administers the process and establishes rules to promote fairness in
the consensus development process, the IEEE does not independently evaluate, test, or verify the
accuracy of any of the information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction
and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does
not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html.
ISO/IEEE 11073‐10425 was prepared by the IEEE 11073 Standards Committee of the IEEE
Engineering in Medicine and Biology Society (as IEEE Std 11073‐10425‐2017) and drafted in
accordance with its editorial rules. It was adopted, under the “fast‐track procedure” defined in the
Partner Standards Development Organization cooperation agreement between ISO and IEEE, by
Technical Committee ISO/TC 215, Health informatics.
This second edition cancels and replaces the first edition (ISO/IEEE 11073‐10425:2016), which has
been technically revised.
A list of all parts in the ISO 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2018 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 11073-10425:2018

---------------------- Page: 6 ----------------------
oSIST prEN ISO 11073-10425:2018
IEEE Std 11073-10425™-2017
(Revision of IEEE Std 11073-10425-2014)
Health informatics—Personal health device communication
Part 10425: Device Specialization—
Continuous Glucose Monitor (CGM)
Sponsor
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 28 September 2017
IEEE-SA Standards Board

---------------------- Page: 7 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE 11073-10425:2018(E)

Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, a normative definition of the communication between continuous glucose monitor
(CGM) devices and managers (e.g., cell phones, personal computers, personal health appliances,
set top boxes), in a manner that enables plug-and-play interoperability, is established in this
standard. It leverages appropriate portions of existing standards including ISO/IEEE 11073
terminology and information models. It specifies the use of specific term codes, formats, and
behaviors in telehealth environments, restricting optionality in base frameworks in favor of
interoperability. This standard defines a common core of communication functionality of CGM
devices. In this context, CGM refers to the measurement of the level of glucose in the body on a
regular (typically 5 minute) basis through a sensor continuously attached to the person.

Keywords: continuous glucose monitor, IEEE 11073-10425™, medical device communication,
personal health devices
































The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA

Copyright © 2018 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 25 January 2018. Printed in the United States of America.

IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.

PDF: ISBN 978-1-5044-4293-0 STD22759
Print: ISBN 978-1-5044-4294-7 STDPD22759

IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
2
Copyright © 2018 IEEE. All rights reserved.
© IEEE 2018 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE 11073-10425:2018(E)

Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
3
Copyright © 2018 IEEE. All rights reserved.
© IEEE 2018 – All rights reserved

---------------------- Page: 9 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE 11073-10425:2018(E)

Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
4
Copyright © 2018 IEEE. All rights reserved.
© IEEE 2018 – All rights reserved

---------------------- Page: 10 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE 11073-10425:2018(E)

Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten
years old and has not undergone a revision process, it is reasonable to conclude that its contents, although
still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to
determine that they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at
http://ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the
IEEE-SA or IEEE’s standards development process, visit the IEEE-SA Website at http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL:
http://standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE-SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.
5
Copyright © 2018 IEEE. All rights reserved.
© IEEE 2018 – All rights reserved

---------------------- Page: 11 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE 11073-10425:2018(E)

Participants
At the time this standard was submitted to the IEEE-SA Standards Board for approval, the Personal Health
Device Working Group had the following membership:
Daidi Zhong, Chair
Michael J. Kirwan, Chair
Nathaniel M. Hamming, Vice Chair
Akib Uddin, Vice Chair
Karsten Aalders Seungchul Chae Ken Fuchs
Charles R. Abbruscato Rahul Chauhan Jing Gao
Nabil Abujbara James Cheng Xuemei Gao
Maher Abuzaid Peggy Chien Marcus Garbe
James Agnew David Chiu John Garguilo
Haidar Ahmad Jinyong Choi Rick Geimer
Manfred Aigner Chia-Chin Chong Igor Gejdos
Jorge Alberola Saeed A. Choudhary Ferenc Gerbovics
Murtaza Ali Jinhan Chung Nicolae Goga
Rolf Ambuehl Malcolm Clarke Julian Goldman
David Aparisi John A. Cogan Raul Gonzalez Gomez
Paolo Ariano John T. Collins Chris Gough
Lawrence Arne Cory Condek Channa Gowda
Diego B. Arquillo Todd H. Cooper Charles M. Gropper
Serafin Arroyo David Cornejo Amit Gupta
Muhammad Asim Douglas Coup Jeff Guttmacher
Merat Bagha Rasmus Haahr
Nigel Cox
Doug Baird Hans Crommenacker Christian Habermann
David Baker Tomio Crosley Michael Hagerty
Anindya Bakshi Allen Curtis Jerry Hahn
Ananth Balasubramanian Ndifor Cyril Fru Robert Hall
Sunlee Bang Jesús Daniel Trigo Rickey L. Hampton
M. Jonathan Barkley Eyal Dassau Sten Hanke
Gilberto Barrón David Davenport Aki Harma
David Bean Russell Davis Jordan Hartmann
John Bell Sushil K. Deka Kai Hassing
Rudy Belliardi Ciro de la Vega Marc Daniel Haunschild
Kathryn M. Bennett Pedro de-las-Heras-Quiros Wolfgang Heck
Daniel Bernstein Jim DelloStritto Nathaniel Heintzman
George A. Bertos Matthew d’Entremont Charles Henderson
Chris Biernacki Kent Dicks Jun-Ho Her
Ola Björsne Hyoungho Do Helen B. Hernandez
Thomas Blackadar Alistair Donaldson Takashi Hibino
Marc Blanchet Xiaolian Duan
Timothy L. Hirou
Thomas Bluethner Brian Dubreuil Allen Hobbs
Douglas P. Bogia Sourav Dutta Alex Holland
Xavier Boniface Jakob Ehrensvard Arto Holopainen
Shannon Boucousis Fredrik Einberg Kris Holtzclaw
Julius Broma Michihiro Enokida Robert Hoy
Lyle G. Bullock Javier Escayola Calvo Frank Hsu
Bernard Burg Mark Estes Anne Huang
Chris Burns Leonardo Estevez Sen-Der Huang
Anthony Butt Roger Feeley Zhiqiang Huang
Jeremy Byford-Rew Hailing Feng Ron Huby
Satya Calloji Bosco T. Fernandes David Hughes
Xiaoying Cao Christoph Fischer Robert D. Hughes
Carole C. Carey Morten Flintrup Jiyoung Huh
Craig Carlson Joseph W. Forler Hugh Hunter
Santiago Carot-Nemesio Russell Foster Hitoshi Ikeda
Randy W. Carroll Eric Freudenthal Yutaka Ikeda
Matthias Frohner
Simon Carter Philip O. Isaacson
6
Copyright © 2018 IEEE. All rights reserved.
© IEEE 2018 – All rights reserved

---------------------- Page: 12 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE 11073-10425:2018(E)

Atsushi Ito Jinsei Miyazaki Mark G. Schnell
Michael Jaffe Erik Moll Richard A. Schrenker
Praduman Jain
Darr Moore Antonio Scorpiniti
Wei Jin Carsten Mueglitz Kwang Seok Seo
Danny Jochelson Piotr Murawski Riccardo Serafin
Phaneeth Junga Soundharya Nagasubramanian Sid Shaw
Akiyoshi Kabe Jae-Wook Nah Frank Shen
Steve Kahle Alex Neefus Bozhi Shi
Tomio Kamioka Trong-Nghia Nguyen-Dobinsky Min Shih
James Jin Kang Michael E. Nidd Mazen Shihabi
Kei Kariya Tetsu Nishimura Redmond Shouldice
Andy Kaschl Jim Niswander Sternly K. Simon
Junzo Kashihara Hiroaki Niwamoto Marjorie Skubic
Kohichi Kashiwagi Thomas Norgall Robert Smith
Ralph Kent Anand Noubade Ivan Soh
Laurie M. Kermes Yoshiteru Nozoe Motoki Sone
Ikuo Keshi Abraham Ofek Emily Sopensky
Junhyung Kim Brett Olive Rajagopalan Srinivasan
Minho Kim Begonya Otal Andreas Staubert
Min-Joon Kim Nicholas Steblay
Marco Paleari
Taekon Kim Charles Palmer Lars Steubesand
Tetsuya Kimura Bud Panjwani John (Ivo) Stivoric
Alfred Kloos Carl Pantiskas Raymond A. Strickland
Jeongmee Koh Harry P. Pappas Chandrasekaran Subramaniam
Jean-Marc Koller Hanna Park Hermanni Suominen
John Koon Jong-Tae Park Lee Surprenant
Patty Krantz Myungeun Park Ravi Swami
Raymond Krasinski Soojun Park Ray Sweidan
Alexander Kraus Phillip E. Pash Jin Tan
Ramesh Krishna TongBi Pei Yi Tang
Geoffrey Kruse Lucian Pestritu Haruyuyki Tatsumi
Falko Kuester Soren Petersen John W. Thomas
Rafael Lajara James Petisce Jonas Tirén
Pierre Landau Peter Piction Alexandra Todiruta
Jaechul Lee Michael Pliskin Janet Traub
JongMuk Lee Varshney Prabodh Gary Tschautscher
Masato Tsuchid
Kyong Ho Lee Jeff Price
Rami Lee Harald Prinzhorn Ken Tubman
Sungkee Lee Harry Qiu Yoshihiro Uchida
Woojae Lee Arif Rahman Sunil Unadkat
Yonghee Lee Tanzilur Rahman Fabio Urbani
Joe Lenart Steve Ray Philipp Urbauer
Kathryn A. Lesh Phillip Raymond Laura Vanzago
Catherine Li Tim Reilly Alpo Värri
Qiong Li Barry Reinhold Dalimar Velez
Patrick Lichter Brian Reinhold Rudi Voon
Jisoon Lim Melvin I. Reynolds Barry Vornbrock
Joon-Ho Lim John G. Rhoads Isobel Walker
John Lin Jeffrey S. Robbins David Wang
Wei-Jung Lo Chris Roberts Jerry P. Wang
Charles Lowe Moskowitz Robert Yao Wang
Don Ludolph Timothy Robertson Yi Wang
Christian Luszick David Rosales Steve Warren
Bob MacWilliams Fatemeh Saki Fujio Watanabe
Srikkanth Madhurbootheswaran Bill Saltzstein Toru Watsuji
Miriam L. Makhlouf Benedikt Salzbrunn Mike Weng
Romain Marmot Giovanna Sannino Kathleen Wible
Sandra Martinez Jose A. Santos-Cadenas Paul Williamson
Miguel Martínez de Espronceda Stefan Sauermann Jan Wittenber
Cámara John Sawyer Jia-Rong Wu
Peter Mayhew Guillaume Schatz Will Wykeham
Jim McCain Alois Schloegl Ariton Xhafa
László Meleg Paul S. Schluter Dan Xiao
Alexander Mense Lars Schmitt Yaxi Yan
7
Copyright © 2018 IEEE. All rights reserved.
© IEEE 2018 – All rights reserved

---------------------- Page: 13 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE 11073-10425:2018(E)

Qifeng Yan Qiang Yin Zhiqiang Zhang
Junjie Yang Done-Sik Yoo Thomas Zhao
Ricky Yang Jianchao Zeng Miha Zoubek
Melanie S. Yeung Jason Zhang Szymon Zyskoter

The following members of the individual balloting committee voted on this standard. Balloters may have
voted for approval, disapproval, or abstention.
Charles Barest Nathaniel M. Hamming Paul Schluter
Lyle G. Bullock
Werner Hoelzl Steven Smith
Craig Carlson Noriyuki Ikeuchi Walter Struppler
Malcolm Clarke Atsushi Ito Karl Weber
David Fuschi Piotr Karocki Jan Wittenber
Randall Groves Joerg-Uwe Meyer Oren Yuen
Bartien Sayogo

When the IEEE-SA Standards Board approved this standard on 28 September 2017, it had the following
membership:
Jean-Philippe Faure, Chair
Gary Hoffman, Vice Chair
John D. Kulick, Past Chair
Konstantinos Karachalios, Secretary
Chuck Adams Thomas Kochy Robby Robson
Masayuki Ariyoshi Joseph L. Koepfinger* Dorothy Stanley
Ted Burse Kevin Lu Adrian Stephens
Stephen Dukes Daleep Mohla Mehmet Ulema
Doug Edwards Damir Novosel Phil Wennblom
J. Travis Griffith Ronald C. Petersen Howard Wolfman
Michael Janezic Annette D. Reilly Yu Yuan
*Member Emeritus

8
Copyright © 2018 IEEE. All rights reserved.
© IEEE 2018 – All rights reserved

---------------------- Page: 14 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE 11073-10425:2018(E)

Introduction
This introduction is not part of IEEE Std 11073-10425-2017, Health informatics—Personal health device
communication—Part 10425: Device Specialization—Continuous Glucose Monitor (CGM).
ISO/IEEE 11073 standards enable communication between medical devices and external computer
systems. This document uses the optimized framework created in ISO/IEEE 11073-20601:2016 and
1
describes a specific, interoperable communication approach for continuous glucose monitors (CGMs).
These standards align with, and draw on, the existing clinically focused standards to provide support for
communication of data from clinical or personal health devices (PHDs).


1
Information on references can be found in Clause 2.
9
Copyright © 2018 IEEE. All rights reserved.
© IEEE 2018 – All rights reserved

---------------------- Page: 15 ----------------------
oSIST prEN ISO 11073-10425:2018
ISO/IEEE 11073-10425:2018(E)

Contents
1. Overview . 12
1.1 Scope .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.