SIST EN IEC 62386-333:2018
(Main)Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual Configuration (feature type 33) (IEC 62386-333:2018)
Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual Configuration (feature type 33) (IEC 62386-333:2018)
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts).
This document is applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—
control devices supporting manual configuration.
NOTE Requirements for testing individual products during production are not included.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 333: Besondere Anforderungen für Eingabegeräte – Manuelle Konfiguration (Gerätetyp 33)
Interface d'éclairage adressable numérique - Partie 333 : Exigences particulières pour les dispositifs de commande - Configuration manuelle (type caractéristique 33) (IEC 62386-333:2018)
L'IEC 62386-333:2018 spécifie un système à bus pour la commande par signaux numériques des appareils d’éclairage électroniques conformes aux exigences de l'IEC 61347 (toutes les parties). La présente version bilingue (2019-02) correspond à la version anglaise monolingue publiée en 2018-04.
La version française de cette norme n'a pas été soumise au vote.
Digitalni naslovljivi vmesnik za razsvetljavo - 333. del: Posebne zahteve za nadzorne naprave - Ročna konfiguracija (funkcija tipa 33) (IEC 62386-333:2018)
Ta del standarda IEC 62386 določa sistem vodil za krmiljenje elektronske opreme za razsvetljavo z digitalnimi signali, ki je v skladu z zahtevami standarda IEC 61347 (vsemi deli). Ta dokument se uporablja s standardoma IEC 62386-103:2014 in IEC 62386-103:2014/AMD1: – krmilja, ki podpirajo ročno konfiguracijo.
OPOMBA: Zahteve za preskušanje posameznih proizvodov med proizvodnjo niso vključene.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Interface d'éclairage adressable numérique - Partie 333 : Exigences particulières pour les dispositifs de commande - Configuration manuelle (type caractéristique 33) (IEC 62386-333:2018)Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual Configuration (feature type 33) (IEC 62386-333:2018)35.200Vmesniška in povezovalna opremaInterface and interconnection equipment29.140.50Instalacijski sistemi za razsvetljavoLighting installation systemsICS:Ta slovenski standard je istoveten z:EN IEC 62386-333:2018SIST EN IEC 62386-333:2018en01-september-2018SIST EN IEC 62386-333:2018SLOVENSKI
STANDARD
SIST EN IEC 62386-333:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 62386-333
June 2018 ICS 29.140.50; 29.140.99
English Version
Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual configuration (feature type 33) (IEC 62386-333:2018)
Interface d'éclairage adressable numérique - Partie 333 : Exigences particulières pour les dispositifs de commande - Configuration manuelle (type caractéristique 33) (IEC 62386-333:2018)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 333: Besondere Anforderungen für Eingabegeräte -
Manuelle Konfiguration (Gerätetyp 33) (IEC 62386-333:2018) This European Standard was approved by CENELEC on 2018-05-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-333:2018 E SIST EN IEC 62386-333:2018
EN IEC 62386-333:2018 (E) 2 European foreword The text of document 34C/1267/CDV, future edition 1 of IEC 62386-333, prepared by IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62386-333:2018.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-02-15 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-05-15
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 62386-333:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61347 (series) NOTE Harmonized as EN 61347 (series). IEC 61347-1 NOTE Harmonized as EN 61347-1. SIST EN IEC 62386-333:2018
EN IEC 62386-333:2018 (E) 3 Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 62386-101 2014
Digital addressable lighting interface -
Part 101: General requirements - System components EN 62386-101 2014
+ A11 -
+ A12 -
IEC 62386-103 2014
Digital addressable lighting interface - Part 103: General requirements - Control devices EN 62386-103 2014
+ A13 -
+ A14 -
1 Under preparation. Stage at the time of publication: IEC CCDV 62386-101/AMD1:2018. 2 Under preparation. Stage at the time of publication: EN 62386-101:2014/prA1:2017. 3 Under preparation. Stage at the time of publication: IEC RFDIS 62386-103/AMD1:2018. 4 Under preparation. Stage at the time of publication: EN 62386-103:2014/prA1:2017. SIST EN IEC 62386-333:2018
SIST EN IEC 62386-333:2018
IEC 62386-333 Edition 1.0 2018-04 INTERNATIONAL STANDARD
Digital addressable lighting interface –
Part 333: Particular requirements for control devices – Manual configuration (feature type 33)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ICS 29.140.50; 29.140.99
ISBN 978-2-8322-5520-9
® Registered trademark of the International Electrotechnical Commission ®
Warning! Make sure that you obtained this publication from an authorized distributor. SIST EN IEC 62386-333:2018 colourinside
– 2 – IEC 62386-333:2018 © IEC 2018 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 8 2 Normative references . 8 3 Terms and definitions . 8 4 General . 9 4.1 General . 9 4.2 Version number . 9 4.3 Insulation . 9 5 Electrical specification . 9 6 Interface power supply . 9 7 Transmission protocol structure . 9 7.1 General . 9 7.2 Frame format for event messages . 9 8 Timing . 10 9 Method of operation . 10 9.1 General . 10 9.2 Feature type . 10 9.3 Events . 10 9.3.1 General . 10 9.3.2 Priority use . 10 9.3.3 Bus usage . 10 9.3.4 Encoding . 11 9.3.5 Event generation . 11 9.3.6 Power interruption . 12 9.3.7 Manual configuration affecting multiple variables . 12 9.4 Configuring the feature . 12 9.4.1 General . 12 9.4.2 Manual capability . 12 9.4.3 Enable/disable manual configuration . 14 9.4.4 Querying any manual configuration enabled . 16 9.4.5 Manual configuration behaviour . 16 10 Declaration of variables . 17 11 Definition of commands . 18 11.1 General . 18 11.2 Overview sheets . 18 11.2.1 General . 18 11.2.2 Standard commands . 18 11.3 Event messages . 20 11.3.1 General . 20 11.3.2 Manual configuration event . 20 11.4 Device control instructions . 20 11.5 Device configuration instructions . 20 11.5.1 General . 20 11.5.2 RESET . 20 11.6 Device queries . 20 SIST EN IEC 62386-333:2018
IEC 62386-333:2018 © IEC 2018 – 3 –
11.7 Instance control instructions . 20 11.8 Instance configuration instructions . 20 11.9 Instance queries . 20 11.10 Special commands . 20 11.11 Feature configuration instructions . 20 11.11.1 General . 20 11.11.2 SET MANUAL CONFIGURATION 103 (DTR0) . 21 11.11.3 SET MANUAL CONFIGURATION 3xx (DTR0) . 21 11.11.4 SET MANUAL CONFIGURATION FEATURE 3xx (DTR0) . 21 11.12 Feature queries. 21 11.12.1 General . 21 11.12.2 QUERY MANUAL CONFIGURATION CAPABILITY 103 . 22 11.12.3 QUERY MANUAL CONFIGURATION CAPABILITY 3xx . 22 11.12.4 QUERY MANUAL CONFIGURATION CAPABILITY FEATURE 3xx . 22 11.12.5 QUERY MANUAL CONFIGURATION 103 . 22 11.12.6 QUERY MANUAL CONFIGURATION 3xx . 22 11.12.7 QUERY MANUAL CONFIGURATION FEATURE 3xx . 23 11.12.8 QUERY ANY MANUAL CONFIGURATION ENABLED . 23 Bibliography . 24
Figure 1 – IEC 62386 graphical overview . 6
Table 1 – 24-bit event message frame encoding ‘manual configuration’ . 10 Table 2 – Event source information ‘manual configuration’ . 11 Table 3 – “manualCapabilityDevice” encoding . 13 Table 4 – “manualCapabilityInstance103” encoding . 13 Table 5 – “manualConfigDevice” encoding . 14 Table 6 – “manualConfigInstance103” encoding . 15 Table 7 – Declaration of additions and restrictions to existing device variables . 17 Table 8 – Declaration of additions and restrictions to existing instance variables . 18 Table 9 – Additional feature commands . 19
SIST EN IEC 62386-333:2018
– 4 – IEC 62386-333:2018 © IEC 2018 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 333: Particular requirements for control devices –
Manual configuration (feature type 33)
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-333 has been prepared by IEC technical committee 34: Lamps and related equipment. The text of this International Standard is based on the following documents: CDV Report on voting 34C/1267/CDV 34C/1350/RVC
Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. SIST EN IEC 62386-333:2018
IEC 62386-333:2018 © IEC 2018 – 5 –
A list of all parts in the IEC 62386 series, published under the general title Digital addressable lighting interface, can be found on the IEC website. This Part 333 of IEC 62386 is intended to be used in conjunction with: • Part 101, which contains general requirements for system components; • Part 103, which contains general requirements for control devices. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the specific document. At this date, the document will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended. A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. SIST EN IEC 62386-333:2018
– 6 – IEC 62386-333:2018 © IEC 2018 INTRODUCTION IEC 62386 contains several parts, referred to as series. The 1xx series includes the basic specifications. Part 101 contains general requirements for system components, Part 102 extends this information with general requirements for control gear and Part 103 extends it further with general requirements for control devices. The 2xx parts extend the general requirements for control gear with lamp specific extensions (mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear specific features. The 3xx parts extend the general requirements for control devices with input device specific extensions describing the instance types as well as some common features that can be combined with multiple instance types. This first edition of IEC 62386-333 is intended to be used in conjunction with IEC 62386-101:2014, IEC 62386-101:2014/AMD1:—, IEC 62386-103:2014, IEC 62386-103:2014/AMD1:— and the parts for control devices IEC 62386-3XX. The division of IEC 62386 into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized. This document, and the other parts that make up IEC 62386, in referring to any of the clauses of IEC 62386-1XX, specifies the extent to which such a clause is applicable and the order in which the tests are to be performed; the parts also include additional requirements, as necessary. The setup of the standards is graphically represented in Figure 1 below.
Figure 1 – IEC 62386 graphical overview Where the requirements of any of the clauses of IEC 62386-1XX are referred to in this document by the sentence "The requirements of IEC 62386-1XX, Clause “n” apply”, this sentence is to be interpreted as meaning that all requirements of the clause in question of part 1XX apply, except any which are clearly inapplicable. The standardization of the control interface for control devices is intended to achieve compatible co-existence and multi-master operation between electronic control gear and lighting control devices, below the level of building management systems. This document describes a method of implementing manual configuration for control devices. IEC 101 General requirements - System components 103 General requirements - Control devices 102 General requirements - Control gear 2xx 2xx 2xx 2xx 2xx 3xx 3xx 3xx 3xx 3xx 104 General requirements - Wireless system components SIST EN IEC 62386-333:2018
IEC 62386-333:2018 © IEC 2018 – 7 –
All numbers used in this document are decimal numbers unless otherwise noted. Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; "x" in binary numbers means "don't care". The following typographic expressions are used: Variables: “variableName” or “variableName[3:0]”, giving only bits 3 to 0 of “variableName”. Range of values: [lowest, highest] Command: “COMMAND NAME”.
SIST EN IEC 62386-333:2018
– 8 – IEC 62386-333:2018 © IEC 2018 DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 333: Particular requirements for control devices – Manual configuration (feature type 33)
1 Scope This part of IEC 62386 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts). This document is applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:— control devices supporting manual configuration. NOTE Requirements for testing individual products during production are not included. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62386-101:2014, Digital addressable lighting interface – Part 101: General requirements – System components IEC 62386-101:2014/AMD1:—1 IEC 62386-103:2014, Digital addressable lighting interface – Part 103: General requirements – Control devices IEC 62386-103:2014/AMD1:—2 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 62386-103 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: • IEC Electropedia: available at http://www.electropedia.org/ • ISO Online browsing platform: available at http://www.iso.org/obp 3.1
manual configuration configuration of instance variables and/or control device variables and/or feature variables using other means than the bus EXAMPLE Potentiometer for configuration of the hold time of a movement sensor. _________ 1 Under preparation. Stage at the time of publication: IEC TPUB 62386-101/AMD1:2018. 2 Under preparation. Stage at the time of publication: IEC RFDIS 62386-103/AMD1:2018. SIST EN IEC 62386-333:2018
IEC 62386-333:2018 © IEC 2018 – 9 –
Note 1 to entry: This definition does only cover manual configuration of variables defined within IEC 62386-103 and IEC 62386-3xx. Other manually configurable parameters of a control device are not affected by this document. 4 General 4.1 General The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 4 apply, with the restrictions, changes and additions identified below. 4.2 Version number In 4.2 of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, "103" shall be replaced by "333", “version number” shall be replaced by “extended version number” and “versionNumber” shall be replaced by "extendedVersionNumber". 4.3 Insulation According to IEC 61347-1 it might be required that the control device has at least supplementary insulation. However, this also depends on the connected components (means) for manual configuration. In case internal components are used, the control device shall have at least supplementary insulation. In case of external connected components, it depends on the requirements imposed on these components. NOTE IEC-62386-103:2014 and IEC 62386-103:2014/AMD1 requires system components to have at least basic insulation. Manual configuration means are intended to be safely operable by end users. 5 Electrical specification The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 5, apply. 6 Interface power supply The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 6, apply. 7 Transmission protocol structure 7.1 General The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 7 apply, with the restrictions, changes and additions identified below. 7.2 Frame format for event messages The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, 7.2.2.1 apply, with the following additions and changes (see Table 1). SIST EN IEC 62386-333:2018
– 10 – IEC 62386-333:2018 © IEC 2018 Table 1 – 24-bit event message frame encoding ‘manual configuration’ Bits Event source Event source information Event info 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09…00 1 1 1 0 bit number of variable / instance type / feature type /
short address. Refer to 9.3.4 for further information. Manual configuration
8 Timing The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 8 apply. 9 Method of operation 9.1 General The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 9 apply, with the following additions: 9.2 Feature type The feature type (“featureType”) shall be equal to 33. 9.3 Events 9.3.1 General The requirements of IEC 62386-103:2014, and IEC 62386-103:2014/AMD1:—, 9.6 apply, with the additions identified below. A manual configuration event message shall indicate a change of one or more device variable(s) or instance variable(s) triggered by a manual configuration. NOTE 1 Depending on the variables affected by the change, several separate events can be generated.
NOTE 2 A single event can indicate a simultaneous change of one or more instance/device/feature variables as long as the event source is the same. For example, changing one or more variables within "manualConfigInstance103" will lead to a single event. See 9.3.4. 9.3.2 Priority use The default “eventPriority” of a manual configuration event shall be priority 5.
NOTE Depending on implemented feature functionality “eventPriority” can be set individually on instance and/or on device level.
9.3.3 Bus usage 9.3.3.1 Instance level
Multiple manual configuration events from a single instance may be sent in a transaction. 9.3.3.2 Device level
Multiple manual configuration events from different instances may be sent in a transaction. SIST EN IEC 62386-333:2018
IEC 62386-333:2018 © IEC 2018 – 11 –
9.3.4 Encoding The content of a manual configuration event differs according to the affected variables within “manualConfigDevice”, “manualConfigInstance103”, “manualConfigInstance3xx”, “manualConfigDevFeature3xx” or “manualConfigInstFeature3xx”. The manual configuration event message shall be encoded as described below (see Table 2). Table 2 – Event source information ‘manual configuration’
Bits
Event source
19 18 17 16 15 14 13 12 11…07 06
05…00 Manual configuration leading to a change of a variable within 0 0 0 0 1 c “instanceType” 1 a (current) “shortAddress” a
“manualConfigInstance103”
1
“manualConfigInstance3xx”
1 0
00000b
“manualConfigDevice” (except change of “shortAddress”)
1
0 1 b
(previous) “shortAddress” b
“manualConfigDevice “ (change of “shortAddress”) 1 0 c
c “featureType”
“manualConfigInstFeature3xx”
1 1
“manualConfigDevFeature3xx” a In case current “shortAddress” equals MASK, bits [6:0] shall be 0000000b. b
Bits [12:7] shall contain the value of “shortAddress” before the change has been applied. In case previous short address has been MASK, bits [13:7] shall be 0000000b. c
“
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.