Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements

This European Standard specifies the general safety requirements for outdoor seating and tables for adults for camping, domestic and contract use.
It does not apply to removable upholstery, coverings, seating for spectator facilities, seating and tables for children.
Mechanical safety requirements are covered by prEN 581-2 for seating and prEN 581-3 for tables.
Annex A (informative) is a schematic presentation of requirements and conditions concerning shear and squeeze points.
Annex B (informative) is a rational concerning fingers entrapment.

Außenmöbel - Sitzmöbel und Tische für den Camping-, Wohn- und Objektbereich - Teil 1: Allgemeine sicherheitstechnische Anforderungen

Diese Europäische Norm legt allgemeine sicherheitstechnische Anforderungen für Außensitzmöbel und Außentische für Erwachsene für den Camping , Wohn  und Objektbereich fest.
Sie gilt nicht für abnehmbare Polster, Abdeckungen, Sitzmöbel für Zuschauertribünen sowie Sitzmöbel und Tische für Kinder.
Mechanische sicherheitstechnische Anforderungen sind für Sitzmöbel in FprEN 581 2 und für Tische in prEN 581 3 festgelegt.
Anhang A (informativ) enthält eine schematische Darstellung der Anforderungen und Bedingungen bezüglich Scher  und Quetschstellen.
Anhang B (informativ) besteht aus einer Begründung zu Fingerfangstellen.

Mobilier d'extérieur - Sièges et tables à usage domestique, collectif et de camping - Partie 1 : Exigences générales de sécurité

La présente Norme européenne spécifie les exigences générales de sécurité des sièges et tables pour adultes à usage domestique, collectif et de camping.
Elle ne s’applique pas aux rembourrages, revêtements amovibles, aux installations pour spectateurs, aux sièges et tables pour enfants.
Les exigences mécaniques sont couvertes par les normes NF EN 581-2 pour les sièges et NF EN 581-3 pour les tables.
L’annexe A (informative) contient une représentation schématique des exigences et conditions relatives aux points de cisaillement et de pincement.
L’annexe B (informative) est un rational relatif au coincement des doigts.

Zunanje pohištvo - Sedežno pohištvo in mize za domačo in javno uporabo ter taborjenje - 1. del: Splošne varnostne zahteve

Ta evropski standard določa splošne varnostne zahteve za zunanje sedežno pohištvo in mize za odrasle za domačo in javno uporabo ter taborjenje.
Ne uporablja se za snemljivo oblazinjenje, prevleke, sedeže v prostorih za gledalce ter sedeže in mize za otroke.
Mehanske varnostne zahteve so vključene v standardu prEN 581-2 za sedenje in standardu prEN 581-3 za mize.
Dodatek A (informativni) je shematski prikaz zahtev in pogojev v zvezi s točkami striženja in stiskanja.
Dodatek B (informativni) je utemeljitev prilagoditev za preprečevanje ukleščenja prstov.

General Information

Status
Published
Public Enquiry End Date
29-Sep-2015
Publication Date
08-Oct-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Sep-2017
Due Date
20-Nov-2017
Completion Date
09-Oct-2017

Relations

Buy Standard

Standard
EN 581-1:2017
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 581-1:2017
01-november-2017
1DGRPHãþD
SIST EN 581-1:2006
=XQDQMHSRKLãWYR6HGHåQRSRKLãWYRLQPL]H]DGRPDþRLQMDYQRXSRUDERWHU
WDERUMHQMHGHO6SORãQHYDUQRVWQH]DKWHYH
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1:
General safety requirements
Außenmöbel - Sitzmöbel und Tische für den Camping-, Wohn- und Objektbereich - Teil
1: Allgemeine sicherheitstechnische Anforderungen
Mobilier d'extérieur - Sièges et tables à usage domestique, collectif et de camping -
Partie 1 : Exigences générales de sécurité
Ta slovenski standard je istoveten z: EN 581-1:2017
ICS:
97.140 Pohištvo Furniture
97.200.30 Oprema za taborjenje in Camping equipment and
tabori camp-sites
SIST EN 581-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 581-1:2017

---------------------- Page: 2 ----------------------

SIST EN 581-1:2017


EN 581-1
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2017
EUROPÄISCHE NORM
ICS 97.140; 97.200.30 Supersedes EN 581-1:2006
English Version

Outdoor furniture - Seating and tables for camping,
domestic and contract use - Part 1: General safety
requirements
Mobilier d'extérieur - Sièges et tables à usage Außenmöbel - Sitzmöbel und Tische für den Camping-,
domestique, collectif et de camping - Partie 1 : Wohn- und Objektbereich - Teil 1: Allgemeine
Exigences générales de sécurité sicherheitstechnische Anforderungen
This European Standard was approved by CEN on 9 January 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 581-1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 581-1:2017
EN 581-1:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Test probes . 5
Figure 1 — Measuring probes . 5
5 Safety requirements . 5
5.1 General . 5
5.2 Tubular components . 5
5.3 Shear and squeeze points . 5
5.3.1 Shear and squeeze points when erecting, adjusting and folding away . 5
5.3.2 Shear and squeeze points under the influence of powered mechanisms . 5
5.3.3 Shear and squeeze points during use . 6
6 Test report . 6
Annex A (informative) Schematic presentation of requirements and conditions concerning
shear and squeeze points . 7
Figure A.1 — Schematic presentation of requirements and conditions concerning shear and
squeeze points . 7
Annex B (informative) Rationale for injury of fingers . 8

2

---------------------- Page: 4 ----------------------

SIST EN 581-1:2017
EN 581-1:2017 (E)
European foreword
This document (EN 581-1:2017) has been prepared by Technical Committee CEN/TC 207 “Furniture”,
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2017, and conflicting national standards
shall be withdrawn at the latest by September 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 581-1:2006.
Compared to EN 581-1:2006, the main modifications are:
— clarification of the definitions (camping, domestic and contract use) taken from Annex B and put in
Clause 3 (so Annex B will be superseded),
— test method is deleted, edges and corners are modified to take into account accessible part during
use (accessible parts for seating and tables are defined),
— tubular components are defined, requirements for gaps and holes removed,
— addition of an Annex B (informative) as a rationale to explain the risks covered with requirements
in Clause 5.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.