iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 13165-1:2020

(Main)

Water quality - Radium-226 - Part 1: Test method using liquid scintillation counting (ISO 13165-1:2013)

Water quality - Radium-226 - Part 1: Test method using liquid scintillation counting (ISO 13165-1:2013)

ISO 13165-1:2013 specifies the determination of radium-226 (226Ra) activity concentration in non-saline water samples by extraction of its daughter radon-222 (222Rn) and its measurement using liquid scintillation counting.
Radium-226 activity concentrations which can be measured by this test method utilizing currently available liquid scintillation counters goes down to 50 mBq l−1. This method is not applicable to the measurement of other radium isotopes.

Wasserbeschaffenheit - Radium-226 - Teil-1: Verfahren mit dem Flüssigszintillationszhler (ISO 13165-1:2013)

Dieser Teil von ISO 13165 legt ein Verfahren für die Bestimmung der Aktivitätskonzentration von Radium 226 (226Ra) in nicht salzhaltigem Wasser durch Extraktion des Tochterisotops Radon 222 (222Rn) und dessen Messung mithilfe eines Flüssigszintillationszählers fest.
Bei Verwendung derzeit erhältlicher Flüssigszintillationszähler ist Radium 226 mit diesem Verfahren in Aktivitätskonzentrationen ab 50 mBq l−1 messbar. Dieses Verfahren eignet sich nicht für die Messung anderer Radiumisotope.

Qualité de l'eau - Radium 226 - Partie 1: Méthode d'essai par comptage des scintillations en milieu liquide (ISO 13165-1:2013)

L'ISO 13165-1:2013 spécifie la détermination de l'activité volumique du radium 226 (226Ra) dans des échantillons d'eau non saline par extraction de son produit, le radon 222 (222Rn), et son mesurage par comptage des scintillations en milieu liquide.
Les activités volumiques du radium 226 qui peuvent être mesurées au moyen de cette méthode d'essai par comptage des scintillations en milieu liquide vont jusqu'à 50 mBq l-1. Cette méthode n'est pas applicable au mesurage d'autres isotopes du radium.

Kakovost vode - Radij Ra-226 - 1. del: Preskusna metoda s štetjem s tekočinskim scintilatorjem (ISO 13165-1:2013)

General Information

Status
Published
Public Enquiry End Date
01-Aug-2019
Publication Date
07-Apr-2020
ICS
13.060.60 - Examination of physical properties of water
17.240 - Radiation measurements
Technical Committee
KAV - Water quality
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-Apr-2024
Due Date
16-May-2024
Ref Project
EN ISO 13165-1:2020 - Water quality - Radium-226 - Part 1: Test method using liquid scintillation counting (ISO 13165-1:2013)

Relations

Replaced By
SIST EN ISO 13165-1:2024 - Water quality - Radium-226 - Part 1: Test method using liquid scintillation counting (ISO 13165-1:2022)
Effective Date
01-Jun-2024

Buy Standard

EN ISO 13165-1:2020EN ISO 13165-1:2020
PreviousNext
Standard
EN ISO 13165-1:2020
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13165-1:2020
01-maj-2020
Kakovost vode - Radij Ra-226 - 1. del: Preskusna metoda s štetjem s tekočinskim
scintilatorjem (ISO 13165-1:2013)
Water quality - Radium-226 - Part 1: Test method using liquid scintillation counting (ISO
13165-1:2013)
Wasserbeschaffenheit - Radium-226 - Teil-1: Verfahren mit dem
Flüssigszintillationszhler (ISO 13165-1:2013)
Qualité de l'eau - Radium 226 - Partie 1: Méthode d'essai par comptage des scintillations
en milieu liquide (ISO 13165-1:2013)
Ta slovenski standard je istoveten z: EN ISO 13165-1:2020
ICS:
13.060.60 Preiskava fizikalnih lastnosti Examination of physical
vode properties of water
17.240 Merjenje sevanja Radiation measurements
SIST EN ISO 13165-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13165-1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 13165-1:2020


EN ISO 13165-1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 13.060.60; 17.240
English Version

Water quality - Radium-226 - Part 1: Test method using
liquid scintillation counting (ISO 13165-1:2013)
Qualité de l'eau - Radium 226 - Partie 1: Méthode Wasserbeschaffenheit - Radium-226 - Teil-1: Verfahren
d'essai par comptage des scintillations en milieu mit dem Flüssigszintillationszhler (ISO 13165-1:2013)
liquide (ISO 13165-1:2013)
This European Standard was approved by CEN on 6 October 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13165-1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 13165-1:2020
EN ISO 13165-1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 13165-1:2020
EN ISO 13165-1:2020 (E)
European foreword
The text of ISO 13165-1:2013 has been prepared by Technical Committee ISO/TC 147 "Water quality”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO 13165-
1:2020 by Technical Committee CEN/TC 230 “Water analysis” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13165-1:2013 has been approved by CEN as EN ISO 13165-1:2020 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 13165-1:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 13165-1:2020
INTERNATIONAL ISO
STA
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 13165-1:2024(Main)
Water quality - Radium-226 - Part 1: Test method using liquid scintillation counting (ISO 13165-1:2022)
EN ISO 13165-1:2024
  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13164-4:2023(Main)
Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation counting (ISO 13164-4:2023)
EN ISO 13164-4:2023

ISO 13164-4:2015 describes a test method for the determination of radon-222 (222Rn) activity concentration in non-saline waters by extraction and liquid scintillation counting.
The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, are at least above 0,5 Bq l−1 for a 10 ml test sample and a measuring time of 1 h.
This test method can be used successfully with drinking water samples and it is the responsibility of the laboratory to ensure the validity of this test method for water samples of untested matrices.
Annex A gives indication on the necessary counting conditions to meet the required detection limits for drinking water monitoring.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13165-2:2023(Main)
Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2022)
EN ISO 13165-2:2022

This document specifies a test method to determine radium-226 (226Ra) activity concentration in all types of water by emanometry.
The test method specified is suitable for the determination of the soluble, suspended and total 226Ra activity concentration in all types of water with soluble 226Ra activity concentrations greater than 0,02 Bq l−1.
The decay chains of 238U and 232Th are given in Annex A. Figure A.1 shows the 238U and its decay chain.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13163:2022(Main)
Water quality - Lead-210 - Test method using liquid scintillation counting (ISO 13163:2021)
EN ISO 13163:2022

This document specifies a method for the measurement of 210Pb in all types of waters by liquid
scintillation counting (LSC).
The method is applicable to test samples of supply/drinking water, rainwater, surface and ground water,
as well as cooling water, industrial water, domestic, and industrial wastewater after proper sampling
and handling, and test sample preparation. Filtration of the test sample is necessary. Lead‑210 activity
concentration in the environment can vary and usually ranges from 2 mBq l
-1 to 300 mBq l
-1 [27][28].
Using currently available liquid scintillation counters, the limit of detection of this method for 210Pb
is generally of the order of 20 mBq l
-1 to 50 mBq l
-1, which is lower than the WHO criteria for safe
consumption of drinking water (100 mBq l−1).[4][6]
These values can be achieved with a counting time
between 180 min and 720 min for a sample volume from 0,5 l to 1,5 l. Higher activity concentrations
can be measured by either diluting the sample or using smaller sample aliquots or both. The method
presented in this document is not intended for the determination of an ultra-trace amount of 210Pb.
The range of application depends on the amount of dissolved material in the water and on the
performance characteristics of the measurement equipment (background count rate and counting
efficiency).
The method described in this document is applicable to an emergency situation.
The analysis of Pb adsorbed to suspended matter is not covered by this method.
It is the user’s responsibility to ensure the validity of this test method for the water samples tested.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13160:2021(Main)
Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2021)
EN ISO 13160:2021

This document specifies conditions for the determination of 90Sr and 89Sr activity concentration in
samples of environmental water using liquid scintillation counting (LSC) or proportional counting (PC).
The method is applicable to test samples of drinking water, rainwater, surface and ground water,
marine water, as well as cooling water, industrial water, domestic, and industrial wastewater after
proper sampling and handling, and test sample preparation. Filtration of the test sample and a chemical
separation are required to separate and purify strontium from a test portion of the sample.
The detection limit depends on the sample volume, the instrument used, the sample count time, the
background count rate, the detection efficiency and the chemical yield. The method described in this
document, using currently available LSC counters, has a detection limit of approximately 10 mBq l−1
and 2 mBq l−1 for 89Sr and 90Sr, respectively, which is lower than the WHO criteria for safe consumption
of drinking water (100 Bq·l−1 for 89Sr and 10 Bq·l−1 for 90Sr)[3]. These values can be achieved with a
counting time of 1 000 min for a sample volume of 2 l.
The methods described in this document are applicable in the event of an emergency situation.
When fallout occurs following a nuclear accident, the contribution of 89Sr to the total amount of
radioactive strontium is not negligible. This document provides test methods to determine the activity
concentration of 90Sr in presence of 89Sr.
The analysis of 90Sr and 89Sr adsorbed to suspended matter is not covered by this method.
It is the user’s responsibility to ensure the validity of this test method selected for the water samples
tested.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10703:2021(Main)
Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry (ISO 10703:2021)
EN ISO 10703:2021

This document specifies a method for the physical pre-treatment and conditioning of water samples
and the determination of the activity concentration of various radionuclides emitting gamma-rays with
energies between 40 keV and 2 MeV, by gamma‑ray spectrometry according to the generic test method
described in ISO 20042.
The method is applicable to test samples of drinking water, rainwater, surface and ground water as well
as cooling water, industrial water, domestic and industrial wastewater after proper sampling, sample
handling, and test sample preparation (filtration when necessary and taking into account the amount
of dissolved material in the water). This method is only applicable to homogeneous samples or samples
which are homogeneous via timely filtration.
The lowest limit that can be measured without concentration of the sample or by using only passive
shield of the detection system is about 5·10-2 Bq/l for e.g. 137Cs1). The upper limit of the activity
corresponds to a dead time of 10 %. Higher dead times may be used but evidence of the accuracy of the
dead-time correction is required.
Depending on different factors, such as the energy of the gamma-rays, the emission probability per
nuclear disintegration, the size and geometry of the sample and the detector, the shielding, the counting
time and other experimental parameters, the sample may require to be concentrated by evaporation
if activities below 5·10-2 Bq/l need to be measured. However, volatile radionuclides (e.g. radon and
radioiodine) can be lost during the source preparation.
This method is suitable for application in emergency situations.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13162:2021(Main)
Water quality - Carbon 14 - Test method using liquid scintillation counting (ISO 13162:2021)
EN ISO 13162:2021

This document specifies a method for the measurement of 14C activity concentration in all types of
water samples by liquid scintillation counting (LSC) either directly on the test sample or following a
chemical separation.
The method is applicable to test samples of supply/drinking water, rainwater, surface and ground water,
marine water, as well as cooling water, industrial water, domestic, and industrial wastewater.
The detection limit depends on the sample volume, the instrument used, the sample counting time, the
background count rate, the detection efficiency and the chemical recovery. The method described in
this document, using currently available liquid scintillation counters and suitable technical conditions,
has a detection limit as low as 1 Bq∙l−1, which is lower than the WHO criteria for safe consumption of
drinking water (100 Bq·l-1). 14C activity concentrations can be measured up to 106 Bq∙l-1 without any
sample dilution.
It is the user’s responsibility to ensure the validity of this test method for the water samples tested.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22515:2021(Main)
Water quality - Iron-55 - Test method using liquid scintillation counting (ISO 22515:2021)
EN ISO 22515:2021

This standard specifies a method for the measurement of iron-55 and nickel-63 (55Fe and 63Ni)in all types of waters by liquid scintillation counting (LSC).
The detection limit depends on the sample volume and the instrument used. The test method described in this standard is based on currently available LSC counters.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13161:2021(Main)
Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
EN ISO 13161:2020

This document specifies a method for the measurement of 210Po in all types of waters by alpha
spectrometry.
The method is applicable to test samples of supply/drinking water, rainwater, surface and ground
water, marine water, as well as cooling water, industrial water, domestic, and industrial wastewater
after proper sampling and handling, and test sample preparation. Filtration of the test sample may be
required.
The detection limit depends on the sample volume, the instrument used, the counting time, the
background count rate, the detection efficiency and the chemical yield. The method described in
this document, using currently available alpha spectrometry apparatus, has a detection limit of
approximately 5 mBq l−1, which is lower than the WHO criteria for safe consumption of drinking water
(100 mBq l−1). This value can be achieved with a counting time of 24 h for a sample volume of 500 ml.
The method described in this document is also applicable in an emergency situation.
The analysis of 210Po adsorbed to suspended matter in the sample is not covered by this method.
If suspended material has to be removed or analysed, filtration using a 0,45 μm filter is recommended.
The analysis of the insoluble fraction requires a mineralization step that is not covered by this document
[13]. In this case, the measurement is made on the different phases obtained. The final activity is the
sum of all the measured activity concentrations.
It is the user’s responsibility to ensure the validity of this test method for the water samples tested.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22017:2021(Main)
Water quality - Guidance for rapid radioactivity measurements in nuclear or radiological emergency situation (ISO 22017:2020)
EN ISO 22017:2020

This standard describes the requirements for rapid testing of water samples under emergency situations in laboratories:
- taking into account a special context for analyses, e.g. an unknown and unusual contamination;
- using or adapting if possible radioactivity measurements methods used in routine to get a result
rapidly or applying specific rapid methods previously tested by the laboratory, e.g. for 89Sr determination ;
- preparing the laboratory to analyse a large number of potentially contaminated samples.
The focus thereby is on cases where rapid radioactivity test methods are applied for all kind of waters. The first steps of the analytical strategy is often based on gross alpha and gross beta as screening methods (adaptation of ISO 10704 and ISO 11704) and gamma spectrometry (adaptation of ISO 10703). Then if necessary, specific radionuclides standards are adapted and applied (for example, Strontium 90 measurement following ISO 13160).
This guideline refers to a number of ISO standards. If appropriate, it will also refer to national or other
publically available standards.
Screening techniques that can be carried out on site are not part of this guide.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day