Intelligent Transport Systems (ITS) - Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

The present document specifies technical characteristics and methods of measurement for radio transmitters and
receivers operating in the frequency range 5 855 MHz to 5 925 MHz. The spectrum usage conditions are set out in
ECC Decision (08)01 [i.1] for the frequency range 5 875 MHz to 5 925 MHz (with 5 905 MHz to 5 925 MHz
considered as a future ITS extension) and in ECC Recommendation (08)01 [i.2] for the frequency range 5 855 MHz
to 5 875 MHz. The Commission Decision 2008/671/EC [i.3] mandates a harmonised use of the frequency band
5 875 MHz to 5 905 MHz dedicated to safety-related applications of ITS throughout the member states of the European
Union. Table 1 outlines the 5 GHz ITS frequency band segmentation.

Inteligentni transportni sistemi (ITS) - Radiokomunikacijska oprema, ki deluje v frekvenčnem pasu od 5855 MHz do 5925 MHz - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU

Ta dokument določa tehnične karakteristike in merilne metode za radijske oddajnike in sprejemnike, ki delujejo v frekvenčnem območju od 5855 MHz do 5925 MHz. Pogoji uporabe spektra so določeni v odločbi ECC (08)01 [i.1] za frekvenčno območje od 5875 MHz do 5925 MHz (pri čemer se 5905 MHz do 5925 MHz obravnava kot prihodnja razširitev ITS) in priporočilu ECC (08)01 [i.2] za frekvenčno območje od 5855 MHz do 5875 MHz. Odločba Komisije 2008/671/ES [i.3] predpisuje usklajeno uporabo frekvenčnega pasu od 5875 MHz do 5905 MHz, namenjenega za z varnostjo povezane vrste uporabe ITS v državah članicah Evropske unije. V preglednici 1 je prikazana segmentacija frekvenčnega pasu 5 GHz ITS.

General Information

Status
Published
Public Enquiry End Date
22-Jun-2016
Publication Date
01-Mar-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
20-Feb-2017
Due Date
27-Apr-2017
Completion Date
02-Mar-2017
Mandate

Buy Standard

Standard
EN 302 571 V2.1.1:2017
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 302 571 V2.1.1 (2017-02) - Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
English language
49 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 302 571 V2.1.1 (2016-12) - Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
English language
49 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 302 571 V2.0.0 (2016-03) - Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
English language
45 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Intelligent Transport Systems (ITS) - Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU35.240.60Uporabniške rešitve IT v prometuIT applications in transport33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:ETSI EN 302 571 V2.1.1 (2017-02)SIST EN 302 571 V2.1.1:2017en01-april-2017SIST EN 302 571 V2.1.1:2017SLOVENSKI
STANDARD



SIST EN 302 571 V2.1.1:2017



ETSI EN 302 571 V2.1.1 (2017-02) Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
HARMONISED EUROPEAN STANDARD SIST EN 302 571 V2.1.1:2017



ETSI ETSI EN 302 571 V2.1.1 (2017-02) 2
Reference REN/ERM-TG37-024 Keywords harmonised standard, ITS, radio, regulation, transport ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 571 V2.1.1:2017



ETSI ETSI EN 302 571 V2.1.1 (2017-02) 3 Contents Intellectual Property Rights . 7 Foreword . 7 Modal verbs terminology . 7 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 10 3.1 Definitions . 10 3.2 Symbols . 10 3.3 Abbreviations . 11 4 Technical requirements specifications . 11 4.1 Environmental profile . 11 4.2 Conformance requirements . 12 4.2.1 Transmitter frequency stability . 12 4.2.1.1 Definition . 12 4.2.1.2 Limits . 12 4.2.1.3 Conformance . 12 4.2.2 RF output power . 13 4.2.2.1 Definition . 13 4.2.2.2 Limits . 13 4.2.2.3 Conformance . 13 4.2.3 Power spectral density . 13 4.2.3.1 Definition . 13 4.2.3.2 Limits . 13 4.2.3.3 Conformance . 13 4.2.4 Transmit power control . 13 4.2.4.1 Definition . 13 4.2.4.2 Limits . 13 4.2.4.3 Conformance . 13 4.2.5 Transmitter unwanted emissions . 13 4.2.5.1 Transmitter unwanted emissions outside the 5 GHz ITS frequency band . 13 4.2.5.1.1 Definition. 13 4.2.5.1.2 Limits . 14 4.2.5.1.3 Conformance . 14 4.2.5.2 Transmitter spectrum mask within the 5 GHz ITS frequency band for 10 MHz channels . 15 4.2.5.2.1 Definition. 15 4.2.5.2.2 Limits . 15 4.2.5.2.3 Conformance . 15 4.2.6 Receiver spurious emissions . 15 4.2.6.1 Definition . 15 4.2.6.2 Limits . 15 4.2.6.3 Conformance . 15 4.2.7 Receiver selectivity . 16 4.2.7.1 Definition . 16 4.2.7.2 Limits . 16 4.2.7.3 Conformance . 16 4.2.8 Receiver sensitivity . 16 4.2.8.1 Definition . 16 4.2.8.2 Limits . 17 4.2.8.3 Conformance . 17 4.2.9 Interference mitigation for CEN DSRC and HDR DSRC in the frequency band 5 795 MHz to 5 815 MHz . 17 4.2.9.1 Definition . 17 SIST EN 302 571 V2.1.1:2017



ETSI ETSI EN 302 571 V2.1.1 (2017-02) 4 4.2.9.2 Limits . 17 4.2.9.3 Conformance . 17 4.2.10 Decentralized congestion control . 18 4.2.10.1 Definition . 18 4.2.10.2 Limits . 18 4.2.10.3 Conformance . 18 5 Testing for compliance with technical requirements . 19 5.1 Environmental conditions for testing . 19 5.2 Interpretation of measurement results . 19 5.3 Radio test suites . 19 5.3.1 Product information . 19 5.3.2 Transmitter frequency stability . 20 5.3.2.1 Test purpose . 20 5.3.2.2 Test applicability . 20 5.3.2.3 Test description . 20 5.3.2.3.1 Initial conditions . 20 5.3.2.3.2 Conducted measurement. 20 5.3.2.3.3 Radiated measurement . 21 5.3.2.4 Test requirements . 21 5.3.3 RF output power, power spectral density and transmit power control . 21 5.3.3.1 Test purpose . 21 5.3.3.2 Test applicability . 21 5.3.3.3 Test description . 21 5.3.3.3.1 Initial conditions . 21 5.3.3.3.2 Conducted measurement. 21 5.3.3.3.3 Radiated measurement . 23 5.3.3.4 Test requirements . 23 5.3.4 Transmitter unwanted emissions outside the 5 GHz ITS frequency band . 24 5.3.4.1 Test purpose . 24 5.3.4.2 Test applicability . 24 5.3.4.3 Test description . 24 5.3.4.3.1 Initial conditions . 24 5.3.4.3.2 Conducted measurement. 24 5.3.4.3.3 Radiated measurement . 25 5.3.4.4 Test requirements . 25 5.3.5 Transmitter spectrum mask within the 5 GHz ITS frequency band for 10 MHz channel spacing . 25 5.3.5.1 Test Purpose . 25 5.3.5.2 Test applicability . 25 5.3.5.3 Test description . 26 5.3.5.3.1 Initial conditions . 26 5.3.5.3.2 Conducted measurement. 26 5.3.5.3.3 Radiated measurement . 26 5.3.5.4 Test requirements . 26 5.3.6 Receiver spurious emissions . 27 5.3.6.1 Test Purpose . 27 5.3.6.2 Test applicability . 27 5.3.6.3 Test description . 27 5.3.6.3.1 Initial conditions . 27 5.3.6.3.2 Conducted measurement. 27 5.3.6.3.3 Radiated measurement . 28 5.3.6.4 Test requirement . 28 5.3.7 Receiver selectivity . 28 5.3.7.1 Test purpose . 28 5.3.7.2 Test applicability . 28 5.3.7.3 Test description . 28 5.3.7.3.1 Initial conditions . 28 5.3.7.3.2 Conducted measurement. 29 5.3.7.3.3 Radiated measurement . 29 5.3.7.4 Test requirement . 30 5.3.8 Receiver sensitivity . 30 5.3.8.1 Test purpose . 30 SIST EN 302 571 V2.1.1:2017



ETSI ETSI EN 302 571 V2.1.1 (2017-02) 5 5.3.8.2 Test applicability . 30 5.3.8.3 Test description . 30 5.3.8.3.1 Initial conditions . 30 5.3.8.3.2 Conducted measurement. 30 5.3.8.3.3 Radiated measurement . 31 5.3.8.4 Test requirement . 31 5.3.9 CEN DSRC and HDR DSRC protection . 31 5.3.9.1 Test Purpose . 31 5.3.9.2 Test applicability . 31 5.3.9.3 Test description . 31 5.3.9.3.1 Initial conditions . 31 5.3.9.3.2 Measurement of RF output power, unwanted emissions, and transmit duty cycle in coexistence mode. 31 5.3.9.4 Test requirements . 32 5.3.10 CEN DSRC and HDR DSRC detection . 32 5.3.10.1 Test Purpose . 32 5.3.10.2 Initial conditions . 32 5.3.10.3 Test of detecting CEN DSRC and HDR DSRC transmissions . 32 5.3.10.3.1 Test purpose . 32 5.3.10.3.2 Test applicability . 32 5.3.10.3.3 Test description . 32 5.3.10.3.4 Test requirements . 34 5.3.11 Decentralized congestion control . 34 5.3.11.1 Test purpose . 34 5.3.11.2 Test applicability . 34 5.3.11.3 Test description . 34 5.3.11.3.1 Initial conditions . 34 5.3.11.3.2 Conducted measurement. 34 5.3.11.3.3 Radiated measurement . 35 5.3.11.4 Test requirement . 35 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 36 Annex B (normative): Test sites and arrangements for radiated measurements . 37 B.1 Test sites . 37 B.1.1 Open air test sites . 37 B.1.2 Anechoic chamber . 38 B.1.2.1 General . 38 B.1.2.2 Description . 38 B.1.2.3 Influence of parasitic reflections . 38 B.1.2.4 Calibration and mode of use . 38 B.2 Test antenna . 39 B.3 Substitution antenna . 40 Annex C (normative): General description of measurement . 41 C.1 Introduction . 41 C.2 Conducted measurements . 41 C.3 Radiated measurements . 41 C.4 Substitution measurement . 42 Annex D (informative): Guidance on declaring the environmental profile . 44 D.1 Recommended environmental profile . 44 D.2 Temperatures . 44 D.2.1 Introduction . 44 D.2.2 Normal environmental conditions . 44 SIST EN 302 571 V2.1.1:2017



ETSI ETSI EN 302 571 V2.1.1 (2017-02) 6 D.2.3 Extreme environmental conditions . 44 D.3 Test power source . 45 D.3.1 Introduction . 45 D.3.2 Normal test power source .
...

ETSI EN 302 571 V2.1.1 (2017-02)






HARMONISED EUROPEAN STANDARD
Intelligent Transport Systems (ITS);
Radiocommunications equipment operating
in the 5 855 MHz to 5 925 MHz frequency band;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 ETSI EN 302 571 V2.1.1 (2017-02)



Reference
REN/ERM-TG37-024
Keywords
harmonised standard, ITS, radio, regulation,
transport

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 302 571 V2.1.1 (2017-02)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 12
4.2.1 Transmitter frequency stability . 12
4.2.1.1 Definition . 12
4.2.1.2 Limits . 12
4.2.1.3 Conformance . 12
4.2.2 RF output power . 13
4.2.2.1 Definition . 13
4.2.2.2 Limits . 13
4.2.2.3 Conformance . 13
4.2.3 Power spectral density . 13
4.2.3.1 Definition . 13
4.2.3.2 Limits . 13
4.2.3.3 Conformance . 13
4.2.4 Transmit power control . 13
4.2.4.1 Definition . 13
4.2.4.2 Limits . 13
4.2.4.3 Conformance . 13
4.2.5 Transmitter unwanted emissions . 13
4.2.5.1 Transmitter unwanted emissions outside the 5 GHz ITS frequency band . 13
4.2.5.1.1 Definition. 13
4.2.5.1.2 Limits . 14
4.2.5.1.3 Conformance . 14
4.2.5.2 Transmitter spectrum mask within the 5 GHz ITS frequency band for 10 MHz channels . 15
4.2.5.2.1 Definition. 15
4.2.5.2.2 Limits . 15
4.2.5.2.3 Conformance . 15
4.2.6 Receiver spurious emissions . 15
4.2.6.1 Definition . 15
4.2.6.2 Limits . 15
4.2.6.3 Conformance . 15
4.2.7 Receiver selectivity . 16
4.2.7.1 Definition . 16
4.2.7.2 Limits . 16
4.2.7.3 Conformance . 16
4.2.8 Receiver sensitivity . 16
4.2.8.1 Definition . 16
4.2.8.2 Limits . 17
4.2.8.3 Conformance . 17
4.2.9 Interference mitigation for CEN DSRC and HDR DSRC in the frequency band 5 795 MHz to 5 815
MHz . 17
4.2.9.1 Definition . 17
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 302 571 V2.1.1 (2017-02)
4.2.9.2 Limits . 17
4.2.9.3 Conformance . 17
4.2.10 Decentralized congestion control . 18
4.2.10.1 Definition . 18
4.2.10.2 Limits . 18
4.2.10.3 Conformance . 18
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Interpretation of measurement results . 19
5.3 Radio test suites . 19
5.3.1 Product information . 19
5.3.2 Transmitter frequency stability . 20
5.3.2.1 Test purpose . 20
5.3.2.2 Test applicability . 20
5.3.2.3 Test description . 20
5.3.2.3.1 Initial conditions . 20
5.3.2.3.2 Conducted measurement. 20
5.3.2.3.3 Radiated measurement . 21
5.3.2.4 Test requirements . 21
5.3.3 RF output power, power spectral density and transmit power control . 21
5.3.3.1 Test purpose . 21
5.3.3.2 Test applicability . 21
5.3.3.3 Test description . 21
5.3.3.3.1 Initial conditions . 21
5.3.3.3.2 Conducted measurement. 21
5.3.3.3.3 Radiated measurement . 23
5.3.3.4 Test requirements . 23
5.3.4 Transmitter unwanted emissions outside the 5 GHz ITS frequency band . 24
5.3.4.1 Test purpose . 24
5.3.4.2 Test applicability . 24
5.3.4.3 Test description . 24
5.3.4.3.1 Initial conditions . 24
5.3.4.3.2 Conducted measurement. 24
5.3.4.3.3 Radiated measurement . 25
5.3.4.4 Test requirements . 25
5.3.5 Transmitter spectrum mask within the 5 GHz ITS frequency band for 10 MHz channel spacing . 25
5.3.5.1 Test Purpose . 25
5.3.5.2 Test applicability . 25
5.3.5.3 Test description . 26
5.3.5.3.1 Initial conditions . 26
5.3.5.3.2 Conducted measurement. 26
5.3.5.3.3 Radiated measurement . 26
5.3.5.4 Test requirements . 26
5.3.6 Receiver spurious emissions . 27
5.3.6.1 Test Purpose . 27
5.3.6.2 Test applicability . 27
5.3.6.3 Test description . 27
5.3.6.3.1 Initial conditions . 27
5.3.6.3.2 Conducted measurement. 27
5.3.6.3.3 Radiated measurement . 28
5.3.6.4 Test requirement . 28
5.3.7 Receiver selectivity . 28
5.3.7.1 Test purpose . 28
5.3.7.2 Test applicability . 28
5.3.7.3 Test description . 28
5.3.7.3.1 Initial conditions . 28
5.3.7.3.2 Conducted measurement. 29
5.3.7.3.3 Radiated measurement . 29
5.3.7.4 Test requirement . 30
5.3.8 Receiver sensitivity . 30
5.3.8.1 Test purpose . 30
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 302 571 V2.1.1 (2017-02)
5.3.8.2 Test applicability . 30
5.3.8.3 Test description . 30
5.3.8.3.1 Initial conditions . 30
5.3.8.3.2 Conducted measurement. 30
5.3.8.3.3 Radiated measurement . 31
5.3.8.4 Test requirement . 31
5.3.9 CEN DSRC and HDR DSRC protection . 31
5.3.9.1 Test Purpose . 31
5.3.9.2 Test applicability . 31
5.3.9.3 Test description . 31
5.3.9.3.1 Initial conditions . 31
5.3.9.3.2 Measurement of RF output power, unwanted emissions, and transmit duty cycle in
coexistence mode. 31
5.3.9.4 Test requirements . 32
5.3.10 CEN DSRC and HDR DSRC detection . 32
5.3.10.1 Test Purpose . 32
5.3.10.2 Initial conditions . 32
5.3.10.3 Test of detecting CEN DSRC and HDR DSRC transmissions . 32
5.3.10.3.1 Test purpose . 32
5.3.10.3.2 Test applicability . 32
5.3.10.3.3 Test description . 32
5.3.10.3.4 Test requirements . 34
5.3.11 Decentralized congestion control . 34
5.3.11.1 Test purpose . 34
5.3.11.2 Test applicability . 34
5.3.11.3 Test description . 34
5.3.11.3.1 Initial conditions . 34
5.3.11.3.2 Conducted measurement. 34
5.3.11.3.3 Radiated measurement . 35
5.3.11.4 Test requirement . 35
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 36
Annex B (normative): Test sites and arrangements for radiated measurements . 37
B.1 Test sites . 37
B.1.1 Open air test sites . 37
B.1.2 Anechoic chamber . 38
B.1.2.1 General . 38
B.1.2.2 Description . 38
B.1.2.3 Influence of parasitic reflections . 38
B.1.2.4 Calibration and mode of use . 38
B.2 Test antenna . 39
B.3 Substitution antenna . 40
Annex C (normative): General description of measurement . 41
C.1 Introduction . 41
C.2 Conducted measurements . 41
C.3 Radiated measurements . 41
C.4 Substitution measurement . 42
Annex D (informative): Guidance on declaring the environmental profile . 44
D.1 Recommended environmental profile . 44
D.2 Temperatures . 44
D.2.1 Introduction . 44
D.2.2 Normal environmental conditions . 44
ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 302 571 V2.1.1 (2017-02)
D.2.3 Extreme environmental conditions . 44
D.3 Test power source . 45
D.3.1 Introduction . 45
D.3.2 Normal test power source . 45
D.3.2.1 AC mains voltage .
...

Final draft ETSI EN 302 571 V2.1.1 (2016-12)






HARMONISED EUROPEAN STANDARD
Intelligent Transport Systems (ITS);
Radiocommunications equipment operating
in the 5 855 MHz to 5 925 MHz frequency band;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 571 V2.1.1 (2016-12)



Reference
REN/ERM-TG37-024
Keywords
harmonised standard, ITS, radio, regulation,
transport

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 571 V2.1.1 (2016-12)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 12
4.2.1 Transmitter frequency stability . 12
4.2.1.1 Definition . 12
4.2.1.2 Limits . 12
4.2.1.3 Conformance . 12
4.2.2 RF output power . 13
4.2.2.1 Definition . 13
4.2.2.2 Limits . 13
4.2.2.3 Conformance . 13
4.2.3 Power spectral density . 13
4.2.3.1 Definition . 13
4.2.3.2 Limits . 13
4.2.3.3 Conformance . 13
4.2.4 Transmit power control . 13
4.2.4.1 Definition . 13
4.2.4.2 Limits . 13
4.2.4.3 Conformance . 13
4.2.5 Transmitter unwanted emissions . 13
4.2.5.1 Transmitter unwanted emissions outside the 5 GHz ITS frequency band . 13
4.2.5.1.1 Definition. 13
4.2.5.1.2 Limits . 14
4.2.5.1.3 Conformance . 14
4.2.5.2 Transmitter spectrum mask within the 5 GHz ITS frequency band for 10 MHz channels . 15
4.2.5.2.1 Definition. 15
4.2.5.2.2 Limits . 15
4.2.5.2.3 Conformance . 15
4.2.6 Receiver spurious emissions . 15
4.2.6.1 Definition . 15
4.2.6.2 Limits . 15
4.2.6.3 Conformance . 15
4.2.7 Receiver selectivity . 16
4.2.7.1 Definition . 16
4.2.7.2 Limits . 16
4.2.7.3 Conformance . 16
4.2.8 Receiver sensitivity . 16
4.2.8.1 Definition . 16
4.2.8.2 Limits . 17
4.2.8.3 Conformance . 17
4.2.9 Interference mitigation for CEN DSRC and HDR DSRC in the frequency band 5 795 MHz to 5 815
MHz . 17
4.2.9.1 Definition . 17
ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 571 V2.1.1 (2016-12)
4.2.9.2 Limits . 17
4.2.9.3 Conformance . 17
4.2.10 Decentralized congestion control . 18
4.2.10.1 Definition . 18
4.2.10.2 Limits . 18
4.2.10.3 Conformance . 18
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Interpretation of measurement results . 19
5.3 Radio test suites . 19
5.3.1 Product information . 19
5.3.2 Transmitter frequency stability . 20
5.3.2.1 Test purpose . 20
5.3.2.2 Test applicability . 20
5.3.2.3 Test description . 20
5.3.2.3.1 Initial conditions . 20
5.3.2.3.2 Conducted measurement. 20
5.3.2.3.3 Radiated measurement . 21
5.3.2.4 Test requirements . 21
5.3.3 RF output power, power spectral density and transmit power control . 21
5.3.3.1 Test purpose . 21
5.3.3.2 Test applicability . 21
5.3.3.3 Test description . 21
5.3.3.3.1 Initial conditions . 21
5.3.3.3.2 Conducted measurement. 21
5.3.3.3.3 Radiated measurement . 23
5.3.3.4 Test requirements . 23
5.3.4 Transmitter unwanted emissions outside the 5 GHz ITS frequency band . 24
5.3.4.1 Test purpose . 24
5.3.4.2 Test applicability . 24
5.3.4.3 Test description . 24
5.3.4.3.1 Initial conditions . 24
5.3.4.3.2 Conducted measurement. 24
5.3.4.3.3 Radiated measurement . 25
5.3.4.4 Test requirements . 25
5.3.5 Transmitter spectrum mask within the 5 GHz ITS frequency band for 10 MHz channel spacing . 25
5.3.5.1 Test Purpose . 25
5.3.5.2 Test applicability . 25
5.3.5.3 Test description . 26
5.3.5.3.1 Initial conditions . 26
5.3.5.3.2 Conducted measurement. 26
5.3.5.3.3 Radiated measurement . 26
5.3.5.4 Test requirements . 26
5.3.6 Receiver spurious emissions . 27
5.3.6.1 Test Purpose . 27
5.3.6.2 Test applicability . 27
5.3.6.3 Test description . 27
5.3.6.3.1 Initial conditions . 27
5.3.6.3.2 Conducted measurement. 27
5.3.6.3.3 Radiated measurement . 28
5.3.6.4 Test requirement . 28
5.3.7 Receiver selectivity . 28
5.3.7.1 Test purpose . 28
5.3.7.2 Test applicability . 28
5.3.7.3 Test description . 28
5.3.7.3.1 Initial conditions . 28
5.3.7.3.2 Conducted measurement. 29
5.3.7.3.3 Radiated measurement . 29
5.3.7.4 Test requirement . 30
5.3.8 Receiver sensitivity . 30
5.3.8.1 Test purpose . 30
ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 571 V2.1.1 (2016-12)
5.3.8.2 Test applicability . 30
5.3.8.3 Test description . 30
5.3.8.3.1 Initial conditions . 30
5.3.8.3.2 Conducted measurement. 30
5.3.8.3.3 Radiated measurement . 31
5.3.8.4 Test requirement . 31
5.3.9 CEN DSRC and HDR DSRC protection . 31
5.3.9.1 Test Purpose . 31
5.3.9.2 Test applicability . 31
5.3.9.3 Test description . 31
5.3.9.3.1 Initial conditions . 31
5.3.9.3.2 Measurement of RF output power, unwanted emissions, and transmit duty cycle in
coexistence mode. 31
5.3.9.4 Test requirements . 32
5.3.10 CEN DSRC and HDR DSRC detection . 32
5.3.10.1 Test Purpose . 32
5.3.10.2 Initial conditions . 32
5.3.10.3 Test of detecting CEN DSRC and HDR DSRC transmissions . 32
5.3.10.3.1 Test purpose . 32
5.3.10.3.2 Test applicability . 32
5.3.10.3.3 Test description . 32
5.3.10.3.4 Test requirements . 34
5.3.11 Decentralized congestion control . 34
5.3.11.1 Test purpose . 34
5.3.11.2 Test applicability . 34
5.3.11.3 Test description . 34
5.3.11.3.1 Initial conditions . 34
5.3.11.3.2 Conducted measurement. 34
5.3.11.3.3 Radiated measurement . 35
5.3.11.4 Test requirement . 35
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 36
Annex B (normative): Test sites and arrangements for radiated measurements . 37
B.1 Test sites . 37
B.1.1 Open air test sites . 37
B.1.2 Anechoic chamber . 38
B.1.2.1 General . 38
B.1.2.2 Description . 38
B.1.2.3 Influence of parasitic reflections . 38
B.1.2.4 Calibration and mode of use . 38
B.2 Test antenna . 39
B.3 Substitution antenna . 40
Annex C (normative): General description of measurement . 41
C.1 Introduction . 41
C.2 Conducted measurements . 41
C.3 Radiated measurements . 41
C.4 Substitution measurement . 42
Annex D (informative): Guidance on declaring the environmental profile . 44
D.1 Recommended environmental profile . 44
D.2 Temperatures . 44
D.2.1 Introduction . 44
D.2.2 Normal environmental conditions . 44
ETSI

---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 302 571 V2.1.1 (2016-12)
D.2.3 Extreme environmental conditions . 44
D.3 Test power source . 45
D.3.1 Introduction . 45
D.3.2 Normal test power source . 45
D.3.2.1 AC mains voltage .
...

Draft ETSI EN 302 571 V2.0.0 (2016-03)






HARMONISED EUROPEAN STANDARD
Intelligent Transport Systems (ITS);
Radiocommunications equipment operating
in the 5 855 MHz to 5 925 MHz frequency band;
Harmonised Standard covering the essential requirements of
article 3.2 of Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 571 V2.0.0 (2016-03)



Reference
REN/ERM-TG37-024
Keywords
harmonised standard, ITS, radio, regulation,
transport

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 571 V2.0.0 (2016-03)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Transmitter frequency stability . 11
4.2.1.1 Definition . 11
4.2.1.2 Limits . 12
4.2.1.3 Conformance . 12
4.2.2 RF output power . 12
4.2.2.1 Definition . 12
4.2.2.2 Limits . 12
4.2.2.3 Conformance . 12
4.2.3 Power spectral density . 13
4.2.3.1 Definition . 13
4.2.3.2 Limits . 13
4.2.3.3 Conformance . 13
4.2.4 Transmit power control . 13
4.2.4.1 Definition . 13
4.2.4.2 Limits . 13
4.2.4.3 Conformance . 13
4.2.5 Transmitter unwanted emissions . 13
4.2.5.1 Transmitter unwanted emissions outside the 5 GHz ITS frequency band . 13
4.2.5.1.1 Definition. 13
4.2.5.1.2 Limits . 13
4.2.5.1.3 Conformance . 14
4.2.5.2 Transmitter spectrum mask within the 5 GHz ITS frequency band for 10 MHz channels . 14
4.2.5.2.1 Definition. 14
4.2.5.2.2 Limits . 14
4.2.5.2.3 Conformance . 14
4.2.6 Receiver spurious emissions . 14
4.2.6.1 Definition . 14
4.2.6.2 Limits . 15
4.2.6.3 Conformance . 15
4.2.7 Receiver selectivity . 15
4.2.7.1 Definition . 15
4.2.7.2 Limits . 15
4.2.7.3 Conformance . 16
4.2.8 Receiver sensitivity . 16
4.2.8.1 Definition . 16
4.2.8.2 Limits . 16
4.2.8.3 Conformance . 16
4.2.9 Interference mitigation for CEN DSRC and HDR DSRC in the frequency band 5 795 MHz to 5 815
MHz . 17
4.2.9.1 Definition . 17
4.2.9.2 Limits . 17
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 571 V2.0.0 (2016-03)
4.2.9.3 Conformance . 17
4.2.10 Decentralized congestion control . 17
4.2.10.1 Definition . 17
4.2.10.2 Limits . 17
4.2.10.3 Conformance . 18
5 Testing for compliance with technical requirements . 18
5.1 Environmental conditions for testing . 18
5.2 Interpretation of measurement results . 18
5.3 Essential radio test suites . 19
5.3.1 Product information . 19
5.3.2 Transmitter frequency stability . 19
5.3.2.1 Test purpose . 19
5.3.2.2 Test applicability . 19
5.3.2.3 Test description . 20
5.3.2.3.1 Initial conditions . 20
5.3.2.3.2 Conducted measurement. 20
5.3.2.3.3 Radiated measurement . 20
5.3.2.4 Test requirements . 20
5.3.3 RF output power, power spectral density and transmit power control . 20
5.3.3.1 Test purpose . 20
5.3.3.2 Test applicability . 21
5.3.3.3 Test description . 21
5.3.3.3.1 Initial conditions . 21
5.3.3.3.2 Conducted measurement. 21
5.3.3.3.3 Radiated measurement . 22
5.3.3.4 Test requirements . 23
5.3.4 Transmitter unwanted emissions outside the 5 GHz ITS frequency band . 23
5.3.4.1 Test purpose . 23
5.3.4.2 Test applicability . 23
5.3.4.3 Test description . 23
5.3.4.3.1 Initial conditions . 23
5.3.4.3.2 Conducted measurement. 23
5.3.4.3.3 Radiated measurement . 24
5.3.4.4 Test requirements . 24
5.3.5 Transmitter spectrum mask within the 5 GHz ITS frequency band for 10 MHz channel spacing . 24
5.3.5.1 Test Purpose . 24
5.3.5.2 Test applicability . 24
5.3.5.3 Test description . 25
5.3.5.3.1 Initial conditions . 25
5.3.5.3.2 Conducted measurement. 25
5.3.5.3.3 Radiated measurement . 25
5.3.5.4 Test requirements . 25
5.3.6 Receiver spurious emissions . 25
5.3.6.1 Test Purpose . 25
5.3.6.2 Test applicability . 25
5.3.6.3 Test description . 26
5.3.6.3.1 Initial conditions . 26
5.3.6.3.2 Conducted measurement. 26
5.3.6.3.3 Radiated measurement . 26
5.3.6.4 Test requirement . 26
5.3.7 Receiver selectivity . 27
5.3.7.1 Test purpose . 27
5.3.7.2 Test applicability . 27
5.3.7.3 Test description . 27
5.3.7.3.1 Initial conditions . 27
5.3.7.3.2 Conducted measurement. 27
5.3.7.3.3 Radiated measurement . 28
5.3.7.4 Test requirement . 28
5.3.8 Receiver sensitivity . 28
5.3.8.1 Test purpose . 28
5.3.8.2 Test applicability . 28
ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 571 V2.0.0 (2016-03)
5.3.8.3 Test description . 28
5.3.8.3.1 Initial conditions . 28
5.3.8.3.2 Conducted measurement. 29
5.3.8.3.3 Radiated measurement . 29
5.3.8.4 Test requirement . 29
5.3.9 CEN DSRC and HDR DSRC protection . 29
5.3.9.1 Test Purpose . 29
5.3.9.2 Test applicability . 29
5.3.9.3 Test description . 29
5.3.9.3.1 Initial conditions . 29
5.3.9.3.2 Measurement of RF output power, unwanted emissions, and transmit duty cycle in
coexistence mode. 30
5.3.9.4 Test requirements . 30
5.3.10 CEN DSRC and HDR DSRC detection . 30
5.3.10.1 Test Purpose . 30
5.3.10.2 Initial conditions . 30
5.3.10.3 Test of detecting CEN DSRC and HDR DSRC transmissions . 31
5.3.10.3.1 Test purpose . 31
5.3.10.3.2 Test applicability . 31
5.3.10.3.3 Test description . 31
5.3.10.3.4 Test requirements . 32
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 33
Annex B (normative): Test sites and arrangements for radiated measurements . 34
B.1 Test sites . 34
B.1.1 Open air test sites . 34
B.1.2 Anechoic chamber . 35
B.1.2.1 General . 35
B.1.2.2 Description . 35
B.1.2.3 Influence of parasitic reflections . 35
B.1.2.4 Calibration and mode of use . 35
B.2 Test antenna . 36
B.3 Substitution antenna . 37
Annex C (normative): General description of measurement . 38
C.1 Introduction . 38
C.2 Conducted measurements . 38
C.3 Radiated measurements . 38
C.4 Substitution measurement . 39
Annex D (informative): Guidance on declaring the environmental profile . 40
D.1 Recommended environmental profile . 40
D.2 Temperatures . 40
D.2.1 Introduction . 40
D.2.2 Normal environmental conditions . 40
D.2.3 Extreme environmental conditions . 40
D.3 Test power source . 40
D.3.1 Introduction . 40
D.3.2 Normal test power source . 41
D.3.2.1 AC mains voltage . 41
D.3.2.2 Regulated lead-acid battery power sources used on vehicles. 41
D.3.2.3 Other power sources . 41
D.3.3 Extreme test source voltages . 41
D.3.3.1 AC mains voltage . 41
ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 302 571 V2.0.0 (2016-03)
D.3.3.2 Regulated lead-acid battery power sources used on vehicles. 41
D.3.3.3 Power sources using other types of batteries . 41
D.3.3.4 Other power sources . 41
D.3.4 Procedure for equipment designed for continuous transmission .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.