iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60601-2-10:2015/A1:2017

(Amendment)

Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators (IEC 60601-2-10:2012/A1:2016)

Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators (IEC 60601-2-10:2012/A1:2016)

Medizinische elektrische Geräte - Teil 2-10: Besondere Festlegungen für die Sicherheit einschließlich der wesentlichen Leistungsmerkmale von Geräten zur Stimulation von Nerven und Muskeln

Appareils électromédicaux - Partie 2-10: Exigences particulières pour la sécurité de base et les performances essentielles des stimulateurs de nerfs et de muscles

Medicinska električna oprema - 2-10. del: Posebne zahteve za osnovno varnost in bistvene lastnosti živčnih in mišičnih stimulatorjev - Dopolnilo A1 (IEC 60601-2-10:2012/A1:2016)

General Information

Status
Published
Publication Date
10-Jan-2017
ICS
11.040.60 - Therapy equipment
Technical Committee
IEMO - Electrical equipment in medical practice
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Jan-2017
Due Date
11-Mar-2017
Completion Date
11-Jan-2017
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/295 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
EN 60601-2-10:2015/A1:2016 - Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators

Relations

Amends
SIST EN 60601-2-10:2015 - Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators (IEC 60601-2-10:2012)
Effective Date
10-Mar-2015

Buy Standard

EN 60601-2-10:2015/A1:2017EN 60601-2-10:2015/A1:2017
PreviousNext
Amendment
EN 60601-2-10:2015/A1:2017
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60601-2-10:2015/A1:2017
01-februar-2017
0HGLFLQVNDHOHNWULþQDRSUHPDGHO3RVHEQH]DKWHYH]DRVQRYQRYDUQRVWLQ
ELVWYHQHODVWQRVWLåLYþQLKLQPLãLþQLKVWLPXODWRUMHY'RSROQLOR$ ,(&
$
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and
essential performance of nerve and muscle stimulators (IEC 60601-2-10:2012/A1:2016)
Medizinische elektrische Geräte - Teil 2-10: Besondere Festlegungen für die Sicherheit
einschließlich der wesentlichen Leistungsmerkmale von Geräten zur Stimulation von
Nerven und Muskeln
Appareils électromédicaux - Partie 2-10: Exigences particulières pour la sécurité de base
et les performances essentielles des stimulateurs de nerfs et de muscles
Ta slovenski standard je istoveten z: EN 60601-2-10:2015/A1:2016
ICS:
11.040.60 Terapevtska oprema Therapy equipment
SIST EN 60601-2-10:2015/A1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60601-2-10:2015/A1:2017

---------------------- Page: 2 ----------------------

SIST EN 60601-2-10:2015/A1:2017


EUROPEAN STANDARD EN 60601-2-10:2015/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2016
ICS 11.040.60

English Version
Medical electrical equipment - Part 2-10: Particular requirements
for the basic safety and essential performance of nerve and
muscle stimulators
(IEC 60601-2-10:2012/A1:2016)
Appareils électromédicaux - Partie 2-10: Exigences Medizinische elektrische Geräte - Teil 2-10: Besondere
particulières pour la sécurité de base et les performances Festlegungen für die Sicherheit einschließlich der
essentielles des stimulateurs de nerfs et de muscles wesentlichen Leistungsmerkmale von Geräten zur
(IEC 60601-2-10:2012/A1:2016) Stimulation von Nerven und Muskeln
(IEC 60601-2-10:2012/A1:2016)
This amendment A1 modifies the European Standard EN 60601-2-10:2015; it was approved by CENELEC on 2016-06-03. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60601-2-10:2015/A1:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60601-2-10:2015/A1:2017
EN 60601-2-10:2015/A1:2016
European foreword
The text of document 62D/1332/FDIS, future IEC 60601-2-10:2012/A1, prepared by SC 62D
"Electromedical equipment", of IEC/TC 62 "Electrical equipment in medical practice" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 60601-2-10:2015/A1:2016.
The following dates are fixed:
(dop) 2017-06-16
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-12-16
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive 93/42/EEC, see informative Annex ZZ, included in
EN 60601-2-10:2015.
Endorsement notice
The text of the International Standard IEC 60601-2-10:2012/A1:2016 was approved by CENELEC as
a European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 60601-2-10:2015/A1:2017
EN 60601-2-10:2015/A1:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60601-2-50:2021(Main)
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2020)
EN IEC 60601-2-50:2021

EN-IEC 60601-2-50 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of INFANT PHOTOTHERAPY EQUIPMENT, as defined in 201.3.203, also referred to as ME EQUIPMENT.If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document,except in 7.2.13 and 8.4.1 of the general standard. This particular standard specifies safety requirements for INFANT PHOTOTHERAPY EQUIPMENT,but alternate methods of compliance with a specific clause by demonstrating equivalent safety will not be judged as non-compliant if the MANUFACTURER has demonstrated in his RISK MANAGEMENT FILE that the RISK presented by the HAZARD has been found to be of an acceptable level when weighed against the benefit of treatment from the device.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-1:2021(Main)
Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV (IEC 60601-2-1:2020)
EN IEC 60601-2-1:2021

This part of IEC 60601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ELECTRON
ACCELERATORS, hereafter referred to as ME EQUIPMENT, in the range 1 MeV to 50 MeV, used for
TREATMENT of PATIENTS.
NOTE 1 While ELECTRON ACCELERATORS used for TREATMENT of PATIENTS are always ME EQUIPMENT, there are times
in this document where they are referred to as EXTERNAL BEAM EQUIPMENT (EBE). Usage of EBE does not remove the
requirements placed on the ME EQUIPMENT but is meant to clarify that the ME EQUIPMENT being discussed is the EBE
and not some other ME EQUIPMENT that may be part of the system configuration.
This particular standard, with the inclusion of TYPE TESTS and SITE TESTS, applies to the
manufacture and some installation aspects of ELECTRON ACCELERATORS and their included
equipment used to increase the precision, accuracy and volumetric targeting of the TREATMENT
delivery
– intended for RADIOTHERAPY in medical practice, including those in which the selection and
DISPLAY of TREATMENT PARAMETERS can be controlled automatically by PROGRAMMABLE
ELECTRONIC SUBSYSTEMS (PESS),
– that, under NORMAL CONDITIONS and in NORMAL USE, deliver a RADIATION BEAM of X-RADIATION
or ELECTRON RADIATION having
• NOMINAL ENERGY in the range 1 MeV to 50 MeV,
• maximum ABSORBED DOSE RATES between 0,001 Gy × s–1 and 1 Gy × s–1 at the ERP from
the RADIATION SOURCE, and
• REFERENCE TREATMENT DISTANCES (RTDs) between 0,5 m and 2 m from the RADIATION
SOURCE;
and
– intended to be
• for NORMAL USE, operated under the authority of the RESPONSIBLE ORGANIZATION by
QUALIFIED PERSONS appropriately licensed or having the required skills for a particular
medical application, for particular SPECIFIED clinical purposes,
• maintained in accordance with the recommendations given in the INSTRUCTIONS FOR USE,
and
• subject to regular QUALITY ASSURANCE performance and calibration checks by a QUALIFIED
PERSON.

  • Standard
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-83:2020/A11:2021(Amendment)
Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment
EN IEC 60601-2-83:2020/A11:2021

2021-02.09 -JO - positive assessment for MDD (EN IEC 60601-2-83:2020 - PR= 64477) and the comments of the HAS consultant for MDR was resolved by the TC for EN IEC 60601-2-83:2020/prA11 - PR= 72969
This A11 introduces a revised Annex ZA & Annex ZZ  to EN IEC 60601-2-83:2020 in view of offering it for citation in OJEU under MDD (93/42/EEC) and MDR (2017/745)

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 80601-2-78:2020(Main)
Medical Electrical Equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation (IEC 80601-2-78:2019)
EN IEC 80601-2-78:2020

EN-IEC 62386-105 applies to control gear and control devices.Typically, a bus unit according to IEC 62386 (all parts) contains firmware. There arecircumstances where it might be necessary to change the firmware after production orshipping of the product. For example if the bus unit does not operate as intended. In such acase, a firmware update of a bus unit via the interface is beneficial.This firmware update process is primarily designed to be a bug fix process, not a featureextension process. Nevertheless the firmware update process can be used for featureextensions. But it is important that the risk of negative effects to the complete system isconsidered in detail.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-83:2020(Main)
Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment (IEC 60601-2-83:2019)
EN IEC 60601-2-83:2020

EN-IEC 60601-2-83 is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HOME LIGHT THERAPY EQUIPMENT, intended for use in the HOME HEALTHCARE ENVIRONMENT. HOME LIGHT THERAPY EQUIPMENT is typically used by a LAY OPERATOR. The scope of this document includes all light sources except laser. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62667:2018(Main)
Medical electrical equipment - Medical light ion beam equipment - Performance characteristics (IEC 62667:2017)
EN IEC 62667:2018

This document applies to LIGHT ION BEAM ME EQUIPMENT when used, for therapy purposes, in
human medical practice.
This document applies to LIGHT ION BEAM ME EQUIPMENT which delivers LIGHT ION BEAMS with an
ENERGY PER NUCLEON in the range 10 MeV/n to 500 MeV/n.
This document describes measurements and test procedures to be performed by the
MANUFACTURER of LIGHT ION BEAM ME EQUIPMENT but does not specify ACCEPTANCE TESTS.
This document specifies test procedures for the determination and disclosure of performance
characteristics, knowledge of which is necessary for proper selection, application, and use of
LIGHT ION BEAM ME EQUIPMENT and which are to be declared in the ACCOMPANYING
DOCUMENTATION together with the greatest deviation or variation to be expected under specific
conditions in NORMAL USE. A format for presentation of performance values is given in
Annex A.
It is recognized that inaccuracies in the test methods can occur when assessing performance.
However, it was felt preferable not to combine the errors into an overall performance
tolerance but rather to keep them separate in the expectation that more accurate test methods
will evolve.
It is not intended that this document in any way inhibit the future development of new designs
of equipment which may have operating modes and parameters different from those described
herein, provided that such equipment achieves equivalent or better levels of performance for
the TREATMENT of PATIENTS.
This document applies to both ISOCENTRIC and non-ISOCENTRIC GANTRIES but many of the tests
assume that the LIGHT ION BEAM ME EQUIPMENT has an ISOCENTRIC GANTRY. Where the
equipment is non-ISOCENTRIC, the description of performance and test methods may be
suitably adapted.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-50:2009/A1:2017(Amendment)
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2009/A1:2016)
EN 60601-2-50:2009/A1:2016
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-6:2015/A1:2016(Amendment)
Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment - Proposed Horizontal Standard (IEC 60601-2-6:2012/A1:2016)
EN 60601-2-6:2015/A1:2016
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-3:2015/A1:2016(Amendment)
Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment - Proposed Horizontal Standard (IEC 60601-2-3:2012/A1:2016)
EN 60601-2-3:2015/A1:2016
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-5:2015
Medical electrical equipment -- Part 2-5: Particular requirements for basic safety and essential performance of ultrasonic physiotherapy equipment
EN 60601-2-5:2015

IEC 60601-2-5:2009 applies to the basic safety and essential performance of ultrasonic physiotherapy equipment employing a single plane unfocused circular transducer per treatment head, producing static beams perpendicular to the face of the treatment head. This standard can also be applied to ultrasonic physiotherapy equipment used for compensation or alleviation of disease, injury or disability. This third edition cancels and replaces the second edition published in 2000. This edition constitutes a technical revision. The numbering was revised to agree with IEC 60601-1:2005 (third edition). Beyond this, essential performance characteristics are defined in 201.4.3.101, guidance on maintenance is added in 201.7.9.2.1, a new requirement regarding dielectric withstand was added in 201.8.8.3. The clause on transducer surface temperature rise, 201.11, has been modified to allow for simulated use conditions. Measurements of ultrasound-related parameters are now referenced to IEC 61689:2007 (second edition). The most important change in the ultrasound-related parameters is the definition of effective radiating area, 201.3.207. This change will also affect the value of the effective intensity and its uncertainty.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day