SIST EN ISO 19074:2015

Leather - Physical and mechanical tests - Determination of water absorption by capillary action (wicking) (ISO 19074:2015)

This standard specifies a method for determining the rate of absorption of water by capillary action or wicking in leathers. It is applicable to all types of leather.

Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wasseraufnahme durch Kapillarwirkung (Wicking) (ISO 19074:2015)

Cuir - Essais physiques et mécaniques - Détermination de l'absorption en eau par capillarité (mèche) (ISO 19074:2015)

L'ISO 19074:2015 spécifie une méthode de détermination du taux d'absorption d'eau des cuirs par capillarité ou par effet de mèche. Elle est applicable à tous les types de cuir.

Usnje - Fizikalni in mehanski preskusi - Določanje sposobnosti kapilarnega vpijanja vode (wicking) (ISO 19074:2015)

Ta standard določa metodo za določanje sposobnosti kapilarnega vpijanja vode (wicking) v usnju. Uporablja se za vse vrste usnja.

General Information

• Status: Published
• Public Enquiry End Date: 05-Jan-2014
• Publication Date: 19-Oct-2015
• ICS: 59.140.30 - Leather and furs
• Technical Committee: IUSN - Leather
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Oct-2015
• Due Date: 13-Dec-2015
• Completion Date: 20-Oct-2015
• Ref Project: EN ISO 19074:2015 - Leather - Physical and mechanical tests - Determination of water absorption by capillary action (wicking) (ISO 19074:2015)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19074:2015
01-december-2015
8VQMH)L]LNDOQLLQPHKDQVNLSUHVNXVL'RORþDQMHVSRVREQRVWLNDSLODUQHJD
YSLMDQMDYRGHZLFNLQJ,62
Leather - Physical and mechanical tests - Determination of water absorption by capillary
action (wicking) (ISO 19074:2015)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wasseraufnahme
durch Kapillarwirkung (Wicking) (ISO 19074:2015)
Cuir - Essais physiques et mécaniques - Détermination de l'absorption en eau par
capillarité (mèche) (ISO 19074:2015)
Ta slovenski standard je istoveten z: EN ISO 19074:2015
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 19074:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19074:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 19074:2015


EN ISO 19074
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2015
EUROPÄISCHE NORM
ICS 59.140.30
English Version

Leather - Physical and mechanical tests - Determination of
water absorption by capillary action (wicking) (ISO
19074:2015)
Cuir - Essais physiques et mécaniques - Détermination Leder - Physikalische und mechanische Prüfungen -
de l'absorption en eau par capillarité (mèche) (ISO Bestimmung der Wasseraufnahme durch
19074:2015) Kapillarwirkung (Wicking) (ISO 19074:2015)
This European Standard was approved by CEN on 8 August 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19074:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19074:2015
EN ISO 19074:2015 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 19074:2015
EN ISO 19074:2015 (E)
European foreword
This document (EN ISO 19074:2015) has been prepared by Technical Committee CEN/TC 289
“Leather”, the secretariat of which is held by UNI, in collaboration with Technical Committee IULTCS
“International Union of Leather Technologists and Chemists Societies”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall
be withdrawn at the latest by March 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19074:2015 has been approved by CEN as EN ISO 19074:2015 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 19074:2015

---------------------- Page: 6 ----------------------

SIST EN ISO 19074:2015
INTERNATIONAL ISO
STANDARD 19074
IULTCS/IUP 57
First edition
2015-09-01
Leather — Physical and mechanical
tests — Determination of water
absorption by capillary action
(wicking)
Cuir — Essais physiques et mécaniques — Détermination de
l’absorption en eau par capillarité (mèche)
Reference numbers
ISO 19074:2015(E)
IULTCS/IUP 57:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST EN ISO 19074:2015
ISO 19074:2015(E)
IULTCS/IUP 57:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 19074:2015
ISO 19074:2015(E)
IULTCS/IUP 57:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus and materials. 1
5 Sampling and sample preparation . 2
6 Procedure. 3
7 Expression of results . 4
8 Test report . 5
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 19074:2015
ISO 19074:2015(E)
IULTCS/IUP 57:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.
ISO 19074 was prepared by the Physical Test Commission of the International Union of Leather
Technologists and Chemists Soci
...