SIST EN 2997-011:2020
(Main)Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 011: Dummy receptacle - Product standard
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 011: Dummy receptacle - Product standard
This document specifies the characteristics of dummy receptacles in the family of circular electrical connectors coupled by threaded ring. It applies to the class defined in Table 3. For plugs associated with these dummy receptacles, see EN 2997-008.
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C konstant, 200 °C konstant, 260 °C Spitze - Teil 011: Blinddose - Produktnorm
Dieses Dokument legt die Eigenschaften von Blinddosen in der Familie der elektrischen Rundsteckverbinder mit Schraubkupplung fest.
Es gilt für die in Tabelle 3 festgelegte Klasse.
Hinsichtlich der zu diesen Blinddosen zugehörigen freien Steckverbinder siehe EN 2997 008.
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation - 65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 011 : Embase de repos - Norme de produit
Le présent document spécifie les caractéristiques des embases de repos de la famille des connecteurs électriques circulaires à accouplement par bague filetée.
Il s'applique aux classes définies dans le Tableau 3.
Pour les fiches associées à ces embases de repos, voir l’EN 2997-008.
Aeronavtika - Konektorji, električni, okrogli, priključeni z navojnim obročkom, odporni ali neodporni proti ognju, s stalno delovno temperaturo med –65 °C in 175 °C, stalno 200 °C, najvišjo 260 °C - 011. del: Slepa doza - Standard za proizvod
Ta dokument določa značilnosti slepih doz iz družine okroglih električnih konektorjev, priključenih z navojnim obročkom. Uporablja se za razred iz preglednice 3. Za vtiče, povezane s temi slepimi dozami, glej standard EN 2997-008.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2997-011:2020
01-februar-2020
Nadomešča:
SIST EN 2997-011:2010
Aeronavtika - Konektorji, električni, okrogli, priključeni z navojnim obročkom,
odporni ali neodporni proti ognju, s stalno delovno temperaturo med –65 °C in 175
°C, stalno 200 °C, najvišjo 260 °C - 011. del: Slepa doza - Standard za proizvod
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-
resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200
°C continuous, 260 °C peak - Part 011: Dummy receptacle - Product standard
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung,
feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C
konstant, 200 °C konstant, 260 °C Spitze - Teil 011: Blinddose - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague
filetée, résistant au feu ou non, températures d'utilisation - 65 °C à 175 °C continu, 200
°C continu, 260 °C en pointe - Partie 011 : Embase de repos - Norme de produit
Ta slovenski standard je istoveten z: EN 2997-011:2019
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 2997-011:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 2997-011:2020
---------------------- Page: 2 ----------------------
SIST EN 2997-011:2020
EN 2997-011
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 2997-011:2010
English Version
Aerospace series - Connectors, electrical, circular, coupled
by threaded ring, fire resistant or non fire resistant,
operating temperatures -65 °C to 175 °C continuous, 200
°C continuous, 260 °C peak - Part 011: Dummy receptacle -
Product standard
Série aérospatiale - Connecteurs électriques circulaires Luft- und Raumfahrt - Elektrische Rundsteckverbinder
à accouplement par bague filetée, résistant au feu ou mit Schraubkupplung, feuerbeständig oder nicht
non, températures d'utilisation - 65 °C à 175 °C feuerbeständig, Betriebstemperaturen - 65 °C bis 175
continu, 200 °C continu, 260 °C en pointe - Partie 011 : °C konstant, 200 °C konstant, 260 °C Spitze - Teil 011:
Embase de repos - Norme de produit Blinddose - Produktnorm
This European Standard was approved by CEN on 13 October 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2997-011:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2997-011:2020
EN 2997-011:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Quality assurance – Qualification. 8
6 Designation . 8
7 Marking . 9
8 Technical specification . 9
2
---------------------- Page: 4 ----------------------
SIST EN 2997-011:2020
EN 2997-011:2019 (E)
European foreword
This document (EN 2997-011:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2020, and conflicting national standards shall be withdrawn at
the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2997-011:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Aust
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.