Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019)

This document specifies a gradient column method for the determination of the density of non-cellular
moulded or extruded plastics or pellets in void-free form. Density gradient columns are columns
containing a mixture of two liquids, the density in the column increasing uniformly from top to bottom.
NOTE Density is frequently used to follow variations in physical structure or composition of plastic
materials. Density can also be useful in assessing the uniformity of samples or specimens. The density of plastic
materials can depend upon the choice of specimen preparation method. When this is the case, precise details of
the specimen preparation method are intended to be included in the appropriate material specification.

Kunststoffe - Verfahren zur Bestimmung der Dichte von nicht verschäumten Kunststoffen - Teil 2: Verfahren mit Dichtegradientensäule (ISO 1183-2:2019)

Dieses Dokument legt ein Verfahren mit Dichtegradientensäule zur Bestimmung der Dichte von nicht verschäumten, blasenfreien geformten oder extrudierten Kunststoffen oder Pellets fest. Dichtegradienten-säulen sind Säulen, die ein Gemisch von zwei Flüssigkeiten enthalten und in denen die Dichte gleichmäßig vom oberen Teil der Säule zum Boden zunimmt.
ANMERKUNG   Die Dichte wird häufig verwendet, um die Veränderungen in der physikalischen Struktur oder Zusammensetzung von Kunststoffmaterialien zu verfolgen. Die Dichte kann auch bei der Beurteilung der Einheitlichkeit von Proben oder Probekörpern von Nutzen sein. Die Dichte von Kunststoffen kann von der Wahl des Verfahrens zur Herstellung der Probekörper abhängig sein. Ist dies der Fall, sollen genaue Einzelheiten zum Herstellungsverfahren der Probekörper in die entsprechende Werkstoffspezifikation aufgenommen werden.

Plastiques - Méthodes de détermination de la masse volumique des plastiques non alvéolaires - Partie 2: Méthode de la colonne à gradient de masse volumique (ISO 1183-2:2019)

Le présent document spécifie une méthode qui utilise une colonne à gradient pour déterminer la masse volumique des plastiques non alvéolaires, moulés ou extrudés, ou de granulés exempts de cavités fermées. Les colonnes à gradient de masse volumique contiennent un mélange de deux liquides, dont la masse volumique augmente uniformément du haut de la colonne vers le bas.
NOTE       La masse volumique est fréquemment utilisée pour suivre les variations de la structure physique ou de la composition des matériaux plastiques. La masse volumique peut également se révéler utile pour évaluer l'uniformité des échantillons ou des éprouvettes. La masse volumique des matériaux plastiques peut dépendre du choix de la méthode de préparation de l'échantillon. Lorsque cela est applicable, des détails précis de la méthode de préparation de l'échantillon doivent être donnés dans les spécifications appropriées relatives à la matière.

Polimerni materiali - Metode za določanje gostote nepenjenih polimernih materialov - 2. del: Kolonska metoda na osnovi gradienta gostote (ISO 1183-2:2019)

Ta dokument določa kolonsko metodo na osnovi gradienta za določanje gostote nepenjenih ulitih ali ekstrudiranih polimernih materialov ali peletov brez praznine. Stolpci gradientov gostote so stolpci, ki vsebujejo mešanico dveh tekočin, pri čemer se gostota v stolpcu enakomerno povečuje od vrha proti dnu.
OPOMBA: Gostota se pogosto uporablja za spremljanje odstopanj v fizični strukturi ali sestavi plastičnih
materialov. Gostota je lahko uporabna tudi pri ocenjevanju enakomernosti vzorcev ali primerkov. Gostota plastičnih materialov je lahko odvisna od izbire metode priprave primerka. V tem primeru je treba v specifikacijo ustreznega materiala vključiti natančne podrobnosti o metodi priprave primerkov.

General Information

Status
Published
Public Enquiry End Date
31-May-2018
Publication Date
14-Apr-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Apr-2019
Due Date
16-Jun-2019
Completion Date
15-Apr-2019

Relations

Buy Standard

Standard
EN ISO 1183-2:2019
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1183-2:2019
01-junij-2019
1DGRPHãþD
SIST EN ISO 1183-2:2004
3ROLPHUQLPDWHULDOL0HWRGH]DGRORþDQMHJRVWRWHQHSHQMHQLKSROLPHUQLK
PDWHULDORYGHO.RORQVNDPHWRGDQDRVQRYLJUDGLHQWDJRVWRWH ,62

Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density
gradient column method (ISO 1183-2:2019)
Kunststoffe - Verfahren zur Bestimmung der Dichte von nicht verschäumten Kunststoffen
- Teil 2: Verfahren mit Dichtegradientensäule (ISO 1183-2:2019)
Plastiques - Méthodes de détermination de la masse volumique des plastiques non
alvéolaires - Partie 2: Méthode de la colonne à gradient de masse volumique (ISO 1183-
2:2019)
Ta slovenski standard je istoveten z: EN ISO 1183-2:2019
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 1183-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1183-2:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 1183-2:2019


EN ISO 1183-2
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2019
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 1183-2:2004
English Version

Plastics - Methods for determining the density of non-
cellular plastics - Part 2: Density gradient column method
(ISO 1183-2:2019)
Plastiques - Méthodes de détermination de la masse Kunststoffe - Verfahren zur Bestimmung der Dichte
volumique des plastiques non alvéolaires - Partie 2: von nicht verschäumten Kunststoffen - Teil 2:
Méthode de la colonne à gradient de masse volumique Verfahren mit Dichtegradientensäule (ISO 1183-
(ISO 1183-2:2019) 2:2019)
This European Standard was approved by CEN on 7 March 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1183-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1183-2:2019
EN ISO 1183-2:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1183-2:2019
EN ISO 1183-2:2019 (E)
European foreword
This document (EN ISO 1183-2:2019) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1183-2:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 1183-2:2019 has been approved by CEN as EN ISO 1183-2:2019 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1183-2:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 1183-2:2019
INTERNATIONAL ISO
STANDARD 1183-2
Second edition
2019-03
Plastics — Methods for determining
the density of non-cellular plastics —
Part 2:
Density gradient column method
Plastiques — Méthodes de détermination de la masse volumique des
plastiques non alvéolaires —
Partie 2: Méthode de la colonne à gradient de masse volumique
Reference number
ISO 1183-2:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------

SIST EN ISO 1183-2:2019
ISO 1183-2:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 1183-2:2019
ISO 1183-2:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Conditioning . 2
5 Method . 2
5.1 Apparatus . 2
5.2 Immersion liquids . 2
5.3 Specimens . 3
5.4 Procedure . 3
5.4.1 Preparation and calibration of glass floats . 3
5.4.2 Preparation of density gradient column . 3
5.4.3 Measurement of density . 3
5.4.4 Calculations . 4
6 Test report . 4
Annex A (informative) Liquid systems suitable for density determinations .6
Annex B (informative) Preparation of density gradient column . 7
Bibliography .11
© ISO 2019 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 1183-2:2019
ISO 1183-2:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 5, Physical-
chemical properties.
This second edition cancels and replaces the first edition (ISO 1183-2:2004), which has been technically
revised. The main changes compared to the previous edition are as follows:
— normative references have been changed to undated;
— text has been revised editorially.
A list of all parts in the ISO 1183 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 1183-2:2019
INTERNATIONAL STANDARD ISO 1183-2:2019(E)
Plastics — Methods for determining the density of non-
cellular plastics —
Part 2:
Density gradient column method
WARNING — The use of this document may involve hazardous materials, operations or equipment.
This document does not purport to address all of the safety problems, if any, associated with
its use. It is the responsibility of the user of this document to establish appropriate health and
safety practices.
1 Scope
This document specifies a gradient column method for the determination of the density of non-cellular
moulded or extruded plastics or pellets in void-free form. Density gradient columns are columns
containing a mixture of two liquids, the density in the column increasing uniformly from top to bottom.
NOTE Density is frequently used to follow variations in physical structure or composition of plastic
materials. Density can also be useful in assessing the uniformity of samples or specimens. The density of plastic
materials can depend upon the choice of specimen preparation method. When this is the case, precise details of
the specimen preparation method are intended to be included in the appropriate material specification.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 291, Plastics — Standard atmospheres for conditioning and testing
ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion
method, liquid pycnometer method and titration method
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https: //www .iso .org/obp
— IEC Electropedia: available at http: //www .electropedia .org/
3.1
density
ρ
3 3
ratio of the mass m of a sample to its volume V (at the temperature T) expressed in kg/m , kg/dm (g/
3
cm ), or kg/l (g/ml)
[1]
Note 1 to entry: The following terms, based upon ISO 80000-4 , are given in Table 1 for clarification.
© ISO 2019 – All rights reserved 1

---------------------- Page: 11 ----------------------

SIST EN ISO 1183-2:2019
ISO 1183-2:2019(E)

Table 1 — Density te
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.