SIST EN 300 119-2 V2.2.2:2010

Environmental Engineering (EE) - European telecommunication standard for equipment practice - Part 2: Engineering requirements for racks and cabinets

The present document details requirements for racks/cabinets which are supplied fully equipped. The racks/cabinets shall be used for housing telecommunication equipment forming part of a public telecommunication network installed either on the public telecommunication operators' sites, or in the premises of operators' customers.

Okoljski inženiring (EE) - Evropski telekomunikacijski standard za prakso pri opremi - 2. del: Tehnične zahteve za okvire in ohišja

Pričujoči dokument podrobno navaja zahteve za okvire/ohišja, ki se dobavljajo s popolno opremo. Okviri/ohišja se uporabljajo za shranjevanje sestavnih delov telekomunikacijske opreme javnega telekomunikacijskega omrežja, vgrajenega na mestih javnih telekomunikacijskih operaterjev ali v prostorih strank operaterjev.

General Information

• Status: Published
• Publication Date: 18-Jan-2010
• ICS: 19.040 - Environmental testing
• ICS: 33.050.01 - Telecommunication terminal equipment in general
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-Dec-2009
• Due Date: 13-Feb-2010
• Completion Date: 19-Jan-2010
• Ref Project: ETSI EN 300 119-2 V2.2.2 (2009-12) - Environmental Engineering (EE); European telecommunication standard for equipment practice; Part 2: Engineering requirements for racks and cabinets

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 119-2 V2.2.2:2010
01-februar-2010
2NROMVNLLQåHQLULQJ(((YURSVNLWHOHNRPXQLNDFLMVNLVWDQGDUG]DSUDNVRSUL
RSUHPLGHO7HKQLþQH]DKWHYH]DRNYLUHLQRKLãMD
Environmental Engineering (EE) - European telecommunication standard for equipment
practice - Part 2: Engineering requirements for racks and cabinets
Ta slovenski standard je istoveten z: EN 300 119-2 Version 2.2.2
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST EN 300 119-2 V2.2.2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 119-2 V2.2.2:2010

---------------------- Page: 2 ----------------------

SIST EN 300 119-2 V2.2.2:2010

ETSI EN 300 119-2 V2.2.2 (2009-12)
European Standard (Telecommunications series)


Environmental Engineering (EE);
European telecommunication standard
for equipment practice;
Part 2: Engineering requirements for racks and cabinets

---------------------- Page: 3 ----------------------

SIST EN 300 119-2 V2.2.2:2010
 2 ETSI EN 300 119-2 V2.2.2 (2009-12)



Reference
REN/EE-00012
Keywords
environment, equipment practice, rack
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 119-2 V2.2.2:2010
 3 ETSI EN 300 119-2 V2.2.2 (2009-12)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Coordination dimensions for racks/cabinets . 6
3.1 Height . 6
3.2 Width . 6
3.3 Depth . 6
4 Accessibility and line-up of racks/cabinets . 6
5 External cable access . 7
6 Floor loading . 7
6.1 Weight per unit area of fully equipped rack/cabinet . 7
6.2 Weight per unit area of cable support structure and cabling . 7
6.3 Point loading . 7
7 Structural load on a rack/cabinet . 7
7.1 Static load . 7
7.2 Dynamic load . 7
8 Dimensions of packaged rack/cabinet . 7
9 Electromagnetic compatibility requirements . 8
Annex A (informative): Illustrative figures . 9
Annex B (informative): Bibliography . 12
History . 13

ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 119-2 V2.2.2:2010
 4 ETSI EN 300 119-2 V2.2.2 (2009-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Environmental
Engineering (EE).
The present document is part 2 of a multi-part deliverable, aimed at setting out on a common basis, the installation
engineering requirements for telecommunication practice, housing equipment forming part of a public telecommunications
network. EN 300 119-1 [i.1] is a general introduction, and explains the terminology used. The present document specifies
the engineering requirements for racks and cabinets and EN 300 119-3 [i.2] the engineering requirements for
miscellaneous racks and cabinets. EN 300 119-4 [i.3] covers engineering requirements for subracks in miscellaneous racks
and cabinets. EN 300 119-5 [i.4] covers the preferred thermal management solutions for subracks, racks/cabinets and
miscellaneous racks/cabinets installed indoors in restricted access locations, for the removal of heat dissipated by one or
more subracks in an rack complying to the requirements of the present document.
The present document applies to all telecommunication equipment forming part of public telecommunications network.
Illustrative figures are contained in annex A.
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.1].

National transposition dates
Date of adoption of this EN: 30 November 2009
Date of latest announcement of this EN (doa): 28 February 2010
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2010
Date of withdrawal of any conflicting National Standard (dow): 31 August 2010

ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 119-2 V2.2.2:2010
 5 ETSI EN 300 119-2 V2.2.2 (2009-12)
1 Scope
The present document details requirements for racks/cabinets which are supplied fully equipped. Th
...

ETSI EN 300 119-2 V2.2.2 (2009-12)
European Standard (Telecommunications series)


Environmental Engineering (EE);
European telecommunication standard
for equipment practice;
Part 2: Engineering requirements for racks and cabinets

---------------------- Page: 1 ----------------------
2 ETSI EN 300 119-2 V2.2.2 (2009-12)



Reference
REN/EE-00012
Keywords
environment, equipment practice, rack
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 300 119-2 V2.2.2 (2009-12)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Coordination dimensions for racks/cabinets . 6
3.1 Height . 6
3.2 Width . 6
3.3 Depth . 6
4 Accessibility and line-up of racks/cabinets . 6
5 External cable access . 7
6 Floor loading . 7
6.1 Weight per unit area of fully equipped rack/cabinet . 7
6.2 Weight per unit area of cable support structure and cabling . 7
6.3 Point loading . 7
7 Structural load on a rack/cabinet . 7
7.1 Static load . 7
7.2 Dynamic load . 7
8 Dimensions of packaged rack/cabinet . 7
9 Electromagnetic compatibility requirements . 8
Annex A (informative): Illustrative figures . 9
Annex B (informative): Bibliography . 12
History . 13

ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 300 119-2 V2.2.2 (2009-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Environmental
Engineering (EE).
The present document is part 2 of a multi-part deliverable, aimed at setting out on a common basis, the installation
engineering requirements for telecommunication practice, housing equipment forming part of a public telecommunications
network. EN 300 119-1 [i.1] is a general introduction, and explains the terminology used. The present document specifies
the engineering requirements for racks and cabinets and EN 300 119-3 [i.2] the engineering requirements for
miscellaneous racks and cabinets. EN 300 119-4 [i.3] covers engineering requirements for subracks in miscellaneous racks
and cabinets. EN 300 119-5 [i.4] covers the preferred thermal management solutions for subracks, racks/cabinets and
miscellaneous racks/cabinets installed indoors in restricted access locations, for the removal of heat dissipated by one or
more subracks in an rack complying to the requirements of the present document.
The present document applies to all telecommunication equipment forming part of public telecommunications network.
Illustrative figures are contained in annex A.
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.1].

National transposition dates
Date of adoption of this EN: 30 November 2009
Date of latest announcement of this EN (doa): 28 February 2010
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2010
Date of withdrawal of any conflicting National Standard (dow): 31 August 2010

ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 300 119-2 V2.2.2 (2009-12)
1 Scope
The present document details requirements for racks/cabinets which are supplied fully equipped. The racks/cabinets
shall be used for housing telecommunication equipment forming part of a public telecommunication network installed
either on the public telecommunication operators' sites, or in the premises of operators' customers.
EN 300 119-1 [i.1] defines the meaning of rack or cabinet in the context of the present document.
2 References
References are either specific (ide
...

Final draft ETSI EN 300 119-2 V2.2.2 (2009-08)
European Standard (Telecommunications series)


Environmental Engineering (EE);
European telecommunication standard
for equipment practice;
Part 2: Engineering requirements for racks and cabinets

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 300 119-2 V2.2.2 (2009-08)



Reference
REN/EE-00012
Keywords
environment, equipment practice, rack
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 300 119-2 V2.2.2 (2009-08)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Coordination dimensions for racks/cabinets . 6
3.1 Height . 6
3.2 Width . 6
3.3 Depth . 6
4 Accessibility and line-up of racks/cabinets . 6
5 External cable access . 7
6 Floor loading . 7
6.1 Weight per unit area of fully equipped rack/cabinet . 7
6.2 Weight per unit area of cable support structure and cabling . 7
6.3 Point loading . 7
7 Structural load on a rack/cabinet . 7
7.1 Static load . 7
7.2 Dynamic load . 7
8 Dimensions of packaged rack/cabinet . 7
9 Electromagnetic compatibility requirements . 8
Annex A (informative): Illustrative figures . 9
Annex B (informative): Bibliography . 12
History . 13

ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 300 119-2 V2.2.2 (2009-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Environmental
Engineering (EE), and is now submitted for the ETSI standards One-step Approval Procedure.
The present document is part 2 of a multi-part deliverable, aimed at setting out on a common basis, the installation
engineering requirements for telecommunication practice, housing equipment forming part of a public telecommunications
network. EN 300 119-1 [i.1] is a general introduction, and explains the terminology used. The present document specifies
the engineering requirements for racks and cabinets and EN 300 119-3 [i.2] the engineering requirements for
miscellaneous racks and cabinets. EN 300 119-4 [i.3] covers engineering requirements for subracks in miscellaneous racks
and cabinets. EN 300 119-5 [i.4] covers the preferred thermal management solutions for subracks, racks/cabinets and
miscellaneous racks/cabinets installed indoors in restricted access locations, for the removal of heat dissipated by one or
more subracks in an rack complying to the requirements of the present document.
The present document applies to all telecommunication equipment forming part of public telecommunications network.
Illustrative figures are contained in annex A.
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.1].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa

ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 300 119-2 V2.2.2 (2009-08)
1 Scope
The present document details requirements for racks/cabinets which are supplied fully equipped. The racks/cabinets
shall be used for housing telecommunication equipment forming part of a public telecommunication network installed
either on the public telecommunication operators' sites, or in the premises of operators' customers.
EN 300 119-1 [i.1] defines the meaning of rack or cabinet in the context of the present document.
2 References
References a
...