Alpine skis - Determination of fatigue indexes - Cyclic loading test

This International Standard specifies a method for the determination of the fatigue indexes of alpine skis
(i.e. the resistance of the skis to changes in shape and of stiffness) after a bending test with cyclic loading.

Skis alpins -- Détermination des indices de fatigue -- Essai en flexion alternée

L'ISO 6266:2013 sp�cifie une m�thode de d�termination des indices de fatigue des skis alpins (c'est-�-dire la r�sistance des skis aux modifications de forme et de raideur) apr�s essai en flexion altern�e.

Alpske smuči - Določevanje utrujenosti - Preskus s cikličnim obremenjevanjem

Ta mednarodni standard določa metodo za določevanje utrujenosti alpskih smuči (tj. odpornost smuči na spremembe oblike in togosti) po preskusu s cikličnim obremenjevanjem.

General Information

Status
Published
Public Enquiry End Date
14-Sep-2017
Publication Date
14-Sep-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Sep-2017
Due Date
17-Nov-2017
Completion Date
15-Sep-2017

Relations

Buy Standard

Standard
ISO 6266:2013 - Alpine skis -- Determination of fatigue indexes -- Cyclic loading test
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 6266:2017
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 6266:2017
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 6266:2013 - Skis alpins -- Détermination des indices de fatigue -- Essai en flexion alternée
French language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6266
Second edition
2013-03-01
Alpine skis — Determination of
fatigue indexes — Cyclic loading test
Skis alpins — Détermination des indices de fatigue — Essai en
flexion alternée
Reference number
ISO 6266:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 6266:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6266:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 Bending machine . 2
5.2 Measuring device for bottom camber height . 4
5.3 Measuring device for centre spring constant . 4
6 Test specimens. 4
6.1 Lengths . 4
6.2 Number . 5
7 Temperatures for conditioning and testing . 5
8 Procedure. 5
8.1 Measurement of original bottom camber height, h .
B 5
8.2 Measurement of original centre spring constant, c .
M 5
8.3 Determination . 5
8.4 Measurement of final bottom camber height, h’ .
B 6
8.5 Measurement of final centre spring constant, c’ .
M 6
8.6 Assessment of damage . 6
9 Expression of results . 6
9.1 Fatigue index for bottom camber height . 6
9.2 Fatigue index for centre spring constant . 6
10 Test report . 7
© ISO 2013 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 6266:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6266 was prepared by Technical Committee ISO/TC 83, Sports and recreational equipment,
Subcommittee SC 4, Snowsports equipment.
This second edition cancels and replaces the first edition (ISO 6266:1980), which has been technically revised.
iv © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 6266:2013(E)

Introduction
Previous investigations showed that the fatigue of an alpine ski is not easy to describe. If one
understands by fatigue the remaining negative change of some characteristics of the ski, influencing the
performance of the ski, as a result of normal use, several tests would be necessary to determine exactly
the susceptibility of a ski to such changes. In addition, some factors may have substantial influence on
the results such as ski length, spring constant, test temperature, kind of vibration, frequency etc. lt was
therefore decided that a test method taking account of all these factors might be of some interest for ski
research but that it should not be proposed for standardization.
Instead of this, a simplified test of the fatigue behaviour of two important characteristics of the ski (i.e.
of camber height and centre spring constant) was proposed for standardization.
© ISO 2013 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 6266:2013(E)
Alpine skis — Determination of fatigue indexes — Cyclic
loading test
1 Scope
This International Standard specifies a method for the determination of the fatigue indexes of alpine skis
(i.e. the resistance of the skis to changes in shape and of stiffness) after a bending test with cyclic loading.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its ap
...

SLOVENSKI STANDARD
oSIST ISO 6266:2017
01-september-2017
$OSVNHVPXþL'RORþHYDQMHXWUXMHQRVWL3UHVNXVVFLNOLþQLPREUHPHQMHYDQMHP
Alpine skis - Determination of fatigue indexes - Cyclic loading test
Skis alpins -- Détermination des indices de fatigue -- Essai en flexion alternée
Ta slovenski standard je istoveten z: ISO 6266:2013
ICS:
97.220.20 Oprema za zimske športe Winter sports equipment
oSIST ISO 6266:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

oSIST ISO 6266:2017

---------------------- Page: 2 ----------------------

oSIST ISO 6266:2017
INTERNATIONAL ISO
STANDARD 6266
Second edition
2013-03-01
Alpine skis — Determination of
fatigue indexes — Cyclic loading test
Skis alpins — Détermination des indices de fatigue — Essai en
flexion alternée
Reference number
ISO 6266:2013(E)
©
ISO 2013

---------------------- Page: 3 ----------------------

oSIST ISO 6266:2017
ISO 6266:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------

oSIST ISO 6266:2017
ISO 6266:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 Bending machine . 2
5.2 Measuring device for bottom camber height . 4
5.3 Measuring device for centre spring constant . 4
6 Test specimens. 4
6.1 Lengths . 4
6.2 Number . 5
7 Temperatures for conditioning and testing . 5
8 Procedure. 5
8.1 Measurement of original bottom camber height, h .
B 5
8.2 Measurement of original centre spring constant, c .
M 5
8.3 Determination . 5
8.4 Measurement of final bottom camber height, h’ .
B 6
8.5 Measurement of final centre spring constant, c’ .
M 6
8.6 Assessment of damage . 6
9 Expression of results . 6
9.1 Fatigue index for bottom camber height . 6
9.2 Fatigue index for centre spring constant . 6
10 Test report . 7
© ISO 2013 – All rights reserved iii

---------------------- Page: 5 ----------------------

oSIST ISO 6266:2017
ISO 6266:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6266 was prepared by Technical Committee ISO/TC 83, Sports and recreational equipment,
Subcommittee SC 4, Snowsports equipment.
This second edition cancels and replaces the first edition (ISO 6266:1980), which has been technically revised.
iv © ISO 2013 – All rights reserved

---------------------- Page: 6 ----------------------

oSIST ISO 6266:2017
ISO 6266:2013(E)

Introduction
Previous investigations showed that the fatigue of an alpine ski is not easy to describe. If one
understands by fatigue the remaining negative change of some characteristics of the ski, influencing the
performance of the ski, as a result of normal use, several tests would be necessary to determine exactly
the susceptibility of a ski to such changes. In addition, some factors may have substantial influence on
the results such as ski length, spring constant, test temperature, kind of vibration, frequency etc. lt was
therefore decided that a test method taking account of all these factors might be of some interest for ski
research but that it should not be proposed for standardization.
Instead of this, a simplified test of the fatigue behaviour of two important characteristics of the ski (i.e.
of camber height and centre spring constant) was proposed for standardization.
© ISO 2013 – All rights reserved v

---------------------- Page: 7 ----------------------

oSIST ISO 6266:2017

---------------------- Page: 8 ----------------------

oSIST ISO 6266:2017
INTERNATIONAL STANDARD ISO 6266:2013(E)
Alpine skis — Determination
...

SLOVENSKI STANDARD
SIST ISO 6266:2017
01-oktober-2017
1DGRPHãþD
SIST ISO 6266:1995
$OSVNHVPXþL'RORþHYDQMHXWUXMHQRVWL3UHVNXVVFLNOLþQLPREUHPHQMHYDQMHP
Alpine skis - Determination of fatigue indexes - Cyclic loading test
Skis alpins -- Détermination des indices de fatigue -- Essai en flexion alternée
Ta slovenski standard je istoveten z: ISO 6266:2013
ICS:
97.220.20 Oprema za zimske športe Winter sports equipment
SIST ISO 6266:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 6266:2017

---------------------- Page: 2 ----------------------

SIST ISO 6266:2017
INTERNATIONAL ISO
STANDARD 6266
Second edition
2013-03-01
Alpine skis — Determination of
fatigue indexes — Cyclic loading test
Skis alpins — Détermination des indices de fatigue — Essai en
flexion alternée
Reference number
ISO 6266:2013(E)
©
ISO 2013

---------------------- Page: 3 ----------------------

SIST ISO 6266:2017
ISO 6266:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 6266:2017
ISO 6266:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 Bending machine . 2
5.2 Measuring device for bottom camber height . 4
5.3 Measuring device for centre spring constant . 4
6 Test specimens. 4
6.1 Lengths . 4
6.2 Number . 5
7 Temperatures for conditioning and testing . 5
8 Procedure. 5
8.1 Measurement of original bottom camber height, h .
B 5
8.2 Measurement of original centre spring constant, c .
M 5
8.3 Determination . 5
8.4 Measurement of final bottom camber height, h’ .
B 6
8.5 Measurement of final centre spring constant, c’ .
M 6
8.6 Assessment of damage . 6
9 Expression of results . 6
9.1 Fatigue index for bottom camber height . 6
9.2 Fatigue index for centre spring constant . 6
10 Test report . 7
© ISO 2013 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 6266:2017
ISO 6266:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6266 was prepared by Technical Committee ISO/TC 83, Sports and recreational equipment,
Subcommittee SC 4, Snowsports equipment.
This second edition cancels and replaces the first edition (ISO 6266:1980), which has been technically revised.
iv © ISO 2013 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO 6266:2017
ISO 6266:2013(E)

Introduction
Previous investigations showed that the fatigue of an alpine ski is not easy to describe. If one
understands by fatigue the remaining negative change of some characteristics of the ski, influencing the
performance of the ski, as a result of normal use, several tests would be necessary to determine exactly
the susceptibility of a ski to such changes. In addition, some factors may have substantial influence on
the results such as ski length, spring constant, test temperature, kind of vibration, frequency etc. lt was
therefore decided that a test method taking account of all these factors might be of some interest for ski
research but that it should not be proposed for standardization.
Instead of this, a simplified test of the fatigue behaviour of two important characteristics of the ski (i.e.
of camber height and centre spring constant) was proposed for standardization.
© ISO 2013 – All rights reserved v

---------------------- Page: 7 ----------------------

SIST ISO 6266:2017

---------------------- Page: 8 ----------------------

SIST ISO 6266:2017
INTERNATIONAL STANDARD ISO 6
...

NORME ISO
INTERNATIONALE 6266
Deuxième édition
2013-03-01
Skis alpins — Détermination des indices
de fatigue — Essai en flexion alternée
Alpine skis — Determination of fatigue indexes — Cyclic loading test
Numéro de référence
ISO 6266:2013(F)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 6266:2013(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 6266:2013(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 2
5 Appareillage . 2
5.1 Machine pour essai de flexion. 2
5.2 Dispositif de mesure du cambré . 4
5.3 Dispositif de mesure de la raideur globale en flexion . 4
6 Éprouvettes . 4
6.1 Longueurs. 4
6.2 Nombre . 5
7 Températures de conditionnement et d’essai . 5
8 Mode opératoire. 5
8.1 Mesurage de cambré initial, h .
B 5
8.2 Mesurage de la raideur globale en flexion initiale, c .
M 5
8.3 Détermination . 5
8.4 Mesurage du cambré final, h’ .
B 6
8.5 Mesurage de la raideur globale en flexion finale, c’ .
M 6
8.6 Évaluation des détériorations . 6
9 Expression des résultats. 6
9.1 Indice de fatigue du cambré . 6
9.2 Indice de fatigue de la raideur globale en flexion . 6
10 Rapport d’essai . 6
© ISO 2013 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 6266:2013(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne
la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives
ISO/CEI, Partie 2.
La tâche principale des comités techniques est d’élaborer les Normes internationales. Les projets de
Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour vote.
Leur publication comme Normes internationales requiert l’approbation de 75 % au moins des comités
membres votants.
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable de
ne pas avoir identifié de tels droits de propriété et averti de leur existence.
L’ISO 6266 a été élaborée par le comité technique ISO/TC 83, Matériel de sports et d’activités de plein air,
sous-comité SC 4, Équipements de sport de neige.
Cette deuxième édition annule et remplace la première édition (ISO 6266:1980), qui a fait l’objet d’une
révision technique.
iv © ISO 2013 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 6266:2013(F)

Introduction
Des recherches antérieures ont montré la difficulté de caractériser le phénomène de «fatigue» d’un ski
alpin. Si l’on entend par «fatigue» la modification permanente négative de certaines caractéristiques
du ski, qui influencent son comportement, à la suite d’un usage normal, il est nécessaire de réaliser
plusieurs essais pour déterminer avec certitude la sensibilité du ski à de telles modifications. De plus,
de nombreux facteurs peuvent avoir une influence importante sur les résultats, tels que la longueur du
ski, la raideur en flexion, la température d’essai, la nature des vibrations, la fréquence, etc. Il a donc été
décidé qu’une méthode d’essai, tenant compte de tous ces facteurs, présente un intérêt pour la recherche
relative aux skis, toutefois il convient de ne pas la présenter comme norme.
Au lieu de cela, un essai simplifié de comportement à la fatigue de deux caractéristiques importantes du
ski (c’est-à-dire cambré et raideur globale en flexion) a été présenté comme norme.
© ISO 2013 – Tous droits réservés v

---------------------- Page: 5 ----------------------
NORME INTERNATIONALE ISO 6266:2013(F)
Skis alpins — Détermination des indices de fatigue — Essai
en flexion alternée
1 Domaine d’application
La présente Norme internationale spécifie une méthode de détermination des indices de fatigue des
skis alpins (c’est-à-dire la résistance des skis aux modifications de forme et de raideur) après essai en
flexion alternée.
2 Références normatives
Les documents de référence suivants sont indispensables à l’application du présent document. Pour les
références datées, seule l’édition citée s’applique. Pour les références non datées, la dernière édition du
document de référen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.