SIST EN 61753-1:2010

Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards (IEC 61753-1:2007)

This part of IEC 61753 deals with performance standards for all passive fibre optic products, including connectors, passive optical components, fibre management systems and closures. The IEC 61753 series is published in multiple parts. This Part 1 covers general information on performance standards. It defines those tests and severities which form the performance categories or general operating service environments and identifies those tests which are considered to be product specific. Test and severity details are given in Annex A. Part 1 also includes references, definitions and rules for creating a performance standard, together with informative annexes, such as a description of test sequencing given in Annex B, and other pertinent information. Subsequent parts which form IEC 61753 are known as performance standards and are numbered according to the classification defined in Annex C. These standards contain the minimum test and measurement severities which a specific product must satisfy, in order to be categorized as meeting the requirements for use in a particular service environment. A product performance standard will contain a combination of those tests and measurements which are common to all passive fibre optic products, for a particular service environment or performance category, and those which are considered specific to that particular product in that environment.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 1: Allgemeines und Leitfaden für Betriebsverhaltensnormen (IEC 61753-1:2007)

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 1: Généralités et lignes directrices relatives aux normes de qualité de fonctionnement (CEI 61753-1:2007)

La CEI 61753-1 couvre les normes de qualité de fonctionnement applicables à tous les produits passifs à fibres optiques, y compris les connecteurs, les composants optiques passifs, les systèmes de gestion de fibres et les boîtiers.  Elle définit les essais et les sévérités qui constituent les catégories de qualité de fonctionnement ou les environnements de service ou de fonctionnement général et elle identifie les essais qui sont considérés comme spécifiques à un produit.

Izvedbeni standard za optične spojne elemente in pasivne komponente - 1. del: Splošno in navodila za izvedbene standarde (IEC 61753-1:2007)

Ta del IEC 61753 obravnava izvedbene standarde za vse pasivne optične proizvode, vključno s konektorji, pasivnimi optičnimi komponentami, sistemi za delo z vlakni in spojkami. Serija IEC 61753 je objavljena v več delih. Ta prvi del zajema splošne informacije o izvedbenih standardih. Opredeljuje preskuse in natančnosti, ki oblikujejo izvedbene kategorije ali splošna delovna okolja za obratovanje, in določa preskuse, ki so specifični za posamezen proizvod. Podrobnosti o preskusih in natančnosti so navedene v dodatku A. Prvi del vključuje reference, opredelitve in pravila za oblikovanje izvedbenih standardov, skupaj z informativnimi dodatki, kot je opis preskusnega zaporedja, naveden v dodatku B, in drugimi ustreznimi informacijami. Nadaljnji deli, ki sestavljajo IEC 61753, so znani kot izvedbeni standardi in so oštevilčeni glede na razvrstitev, opredeljeno v dodatku C. Ti standardi vsebujejo minimalne natančnosti preskusa in meritve, ki jim mora določen proizvod zadostiti, da izpolnjuje zahteve za uporabo v določenem delovnem okolju. Izvedbeni standard nekega proizvoda vsebuje kombinacijo preskusov in meritev, ki so skupni za vse pasivne optične proizvode za določeno delovno okolje ali izvedbeno kategorijo, in tiste, ki so specifični za določen proizvod v tem okolju.

General Information

• Status: Withdrawn
• Publication Date: 08-Jul-2010
• Withdrawal Date: 10-Oct-2019
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 11-Oct-2019
• Due Date: 03-Nov-2019
• Completion Date: 11-Oct-2019
• Ref Project: EN 61753-1:2007 - Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards

Relations

• Replaces: SIST EN 61753-1-1:2002 - Fibre optic interconnecting devices and passive components performance standard -- Part 1-1: General and guidance - Interconnecting devices (connectors)
• Effective Date: 01-Sep-2010
• Replaced By: SIST EN IEC 61753-1:2019 - Fibre optic interconnecting devices and passive components - Performance standards - Part 1: General and guidance (IEC 61753-1:2018)
• Effective Date: 06-Nov-2018
• Replaced By: SIST EN IEC 61753-1:2019 - Fibre optic interconnecting devices and passive components - Performance standards - Part 1: General and guidance (IEC 61753-1:2018)
• Effective Date: 07-Jun-2022
• Revised: SIST EN 61753-1-1:2002 - Fibre optic interconnecting devices and passive components performance standard -- Part 1-1: General and guidance - Interconnecting devices (connectors)
• Effective Date: 05-Oct-2010
• Revised: SIST EN IEC 61753-1:2019 - Fibre optic interconnecting devices and passive components - Performance standards - Part 1: General and guidance (IEC 61753-1:2018)
• Effective Date: 31-May-2016
• Replaces: SIST EN 61753-1-1:2002 - Fibre optic interconnecting devices and passive components performance standard -- Part 1-1: General and guidance - Interconnecting devices (connectors)
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-1:2010
01-september-2010
1DGRPHãþD
SIST EN 61753-1-1:2002
,]YHGEHQLVWDQGDUG]DRSWLþQHVSRMQHHOHPHQWHLQSDVLYQHNRPSRQHQWHGHO
6SORãQRLQQDYRGLOD]DL]YHGEHQHVWDQGDUGH,(&
Fibre optic interconnecting devices and passive components performance standard -
Part 1: General and guidance for performance standards (IEC 61753-1:2007)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
1: Allgemeines und Leitfaden für Betriebsverhaltensnormen (IEC 61753-1:2007)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs à fibres optiques - Partie 1: Généralités et lignes directrices relatives aux normes
de qualité de fonctionnement (CEI 61753-1:2007)
Ta slovenski standard je istoveten z: EN 61753-1:2007
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61753-1:2010

---------------------- Page: 2 ----------------------

SIST EN 61753-1:2010


EUROPEAN STANDARD
EN 61753-1

NORME EUROPÉENNE
November 2007
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61753-1-1:2001


English version


Fibre optic interconnecting devices and passive components
performance standard -
Part 1: General and guidance for performance standards

(IEC 61753-1:2007)


Norme de qualité de fonctionnement  Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 1: Généralités et lignes directrices Betriebsverhalten -
relatives aux normes Teil 1: Allgemeines und Leitfaden
de qualité de fonctionnement für Betriebsverhaltensnormen
(CEI 61753-1:2007) (IEC 61753-1:2007)




This European Standard was approved by CENELEC on 2007-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-1:2007 E

---------------------- Page: 3 ----------------------

SIST EN 61753-1:2010
EN 61753-1:2007 – 2 –
Foreword
The text of document 86B/2452/FDIS, future edition 1 of IEC 61753-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-1 on 2007-10-01.
This European Standard supersedes EN 61753-1-1:2001.
Specific technical changes vis-à-vis EN 61753-1-1:2001 include that EN 61753-1:2007 covers all passive
fibre optic products, including connectors, passive optical components, fibre management systems and
closures.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-10-01
Annex ZA has been added by CENELEC.
__________
Notice
This document contains material that is Copyright © 2006, Telcordia Technologies, Inc. ("Telcordia").
All rights reserved.
The reader is advised that this IEC document and Telcordia source(s) may differ, and the context and use
of said material in this IEC document may differ from that of Telcordia. Telcordia makes no representation
or warranty, express or implied, with respect to the sufficiency, accuracy, or utility of any information or
opinion contained herein. Any use of or reliance upon said information or opinion is at the risk of the user.
Telcordia shall not be liable for any damage or injury incurred by any person arising out of the sufficiency,
accuracy, or utility of any information or opinion contained herein.
__________
Endorsement notice
The text of the International Standard IEC 61753-1:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60068-1 NOTE Harmonized as EN 60068-1:1994 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61753-1:2010
– 3 – EN 61753-1:2007

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year
1) 2)
IEC 60529 – Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993


1) 2)
IEC 60590 – Determination of the aromatic hydrocarbon HD 382 S1 1979
content of new mineral insulating oils


1) 2)
IEC 61300-2-1 – Fibre optic interconnecting devices and EN 61300-2-1 2003
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)


1) 2)
IEC 61300-2-2 – Fibre optic interconnecting devices and EN 61300-2-2 2003
passive components - Basic test and
measurement procedures -
Part 2-2: Tests - Mating durability


1) 2)
IEC 61300-2-4 – Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention


1) 2)
IEC 61300-2-5 – Fibre optic interconnecting devices and EN 61300-2-5 2002
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion/twist


1) 2)
IEC 61300-2-6 – Fibre optic interconnecting devices and
EN 61300-2-6 1997
passive components - Basic test and
measurement procedures -
Part 2-6: Tests - Tensile strength of coupling
mechanism


IEC 61300-2-7 1995 Fibre optic interconnecting devices and EN 61300-2-7 1997
passive components - Basic test and
measurement procedures -
Part 2-7: Tests - Bending moment


1) 2)
IEC 61300-2-9 – Fibre optic interconnecting devices and EN 61300-2-9 1997
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock



1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 61753-1:2010
EN 61753-1:2007 – 4 –
Publication Year Title EN/HD Year
IEC 61300-2-10 1995 Fibre optic interconnecting devices and EN 61300-2-10 1997
passive components - Basic test and
measurement procedures -
Part 2-10: Tests - Crush resistance


IEC 61300-2-11 1995 Fibre optic interconnecting devices and EN 61300-2-11 1997
passive components - Basic test and
measurement procedures -
Part 2-11: Tests - Axial compression


1) 2)
IEC 61300-2-12 – Fibre optic interconnecting devices and EN 61300-2-12 2005
passive components - Basic test and
measurement procedures -
Part 2-12: Tests - Impact


1) 2)
IEC 61300-2-17 – Fibre optic interconnecting devices and EN 61300-2-17 2003
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold


1) 2)
IEC 61300-2-18 – Fibre optic interconnecting devices and EN 61300-2-18 2005
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High
temperature endurance


1) 2)
IEC 61300-2-19 – Fibre optic interconnecting devices and EN 61300-2-19 2005
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)


1) 2)
IEC 61300-2-21 – Fibre optic interconnecting devices and EN 61300-2-21 1997
passive components - Basic test and
measurement procedures -
Part 2-21: Tests - Composite
temperature-humidity cyclic test


1) 2)
IEC 61300-2-22 – Fibre optic interconnecting devices and EN 61300-2-22 2007
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature


1) 2)
IEC 61300-2-23 – Fibre optic interconnecting devices and EN 61300-2-23 1997
passive components - Basic test and
measurement procedures -
Part 2-23: Tests - Sealing for non-pressurized
closures of fibre optic devices


1) 2)
IEC 61300-2-26 – Fibre optic interconnecting devices and EN 61300-2-26 2007
passive components - Basic test and
measurement procedures -
Part 2-26: Tests - Salt mist


1) 2)
IEC 61300-2-27 – Fibre optic interconnecting devices and EN 61300-2-27 1997
passive components - Basic test and
measurement procedures -
Part 2-27: Tests - Dust - Laminar flow

---------------------- Page: 6 ----------------------

SIST EN 61753-1:2010
– 5 – EN 61753-1:2007
Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-28 – Fibre optic interconnecting devices and EN 61300-2-28 1997
passive components - Basic test and
measurement procedures -
Part 2-28: Tests - Industrial atmosphere
(sulphur dioxide)


1) 2)
IEC 61300-2-33 – Fibre optic interconnecting devices and EN 61300-2-33 2007
passive components - Basic test and
measurement procedures -
Part 2-33: Tests - Assembly and disassembly
of fibre optic closures


1) 2)
IEC 61300-2-34 – Fibre optic interconnecting devices and EN 61300-2-34 1997
passive components - Basic test and
measurement procedures -
Part 2-34: Tests - Resistance to solvents and
contaminating fluids


1) 2)
IEC 61300-2-37 – Fibre optic interconnecting devices and EN 61300-2-37 2007
passive components - Basic test and
measurement procedures -
Part 2-37: Tests - Cable bending for fibre
optic closures


1) 2)
IEC 61300-2-38 – Fibre optic interconnecting devices and EN 61300-2-38 2006
passive components - Basic test and
measurement procedures -
Part 2-38: Tests - Sealing for pressurized
fibre optic closures


1) 2)
IEC 61300-2-42 – Fibre optic interconnecting devices and EN 61300-2-42 2005
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors


1) 2)
IEC 61300-2-44 – Fibre optic interconnecting devices and EN 61300-2-44 2005
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices


1) 2)
IEC 61300-2-45 – Fibre optic interconnecting devices and
EN 61300-2-45 1999
passive components - Basic test and
measurement procedures -
Part 2-45: Tests - Durability test by water
immersion


1) 2)
IEC 61300-2-46 – Fibre optic interconnecting devices and EN 61300-2-46 2006
passive components - Basic test and
measurement procedures -
Part 2-46: Tests - Damp heat cyclic


1) 2)
IEC 61300-2-48 – Fibre optic interconnecting devices and EN 61300-2-48 2003
passive components - Basic test and
measurement procedures -
Part 2-48: Tests - Temperature-humidity
cycling

---------------------- Page: 7 ----------------------

SIST EN 61753-1:2010
EN 61753-1:2007 – 6 –
Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-49 – Fibre optic interconnecting devices and EN 61300-2-49 2007
passive components - Basic test and
measurement procedures -
Part 2-49: Tests - Connector installation test


1) 2)
IEC 61300-2-50 – Fibre optic interconnecting devices and EN 61300-2-50 2007
passive components - Basic test and
measurement procedures -
Part 2-50: Tests - Fibre optic connector proof
test with static load - Singlemode and
multimode


1) 2)
IEC 61300-2-51 – Fibre optic interconnecting devices and EN 61300-2-51 2007
passive components - Basic test and
measurement procedures -
Part 2-51: Tests - Fibre optic connector test
for transmission with applied tensile load -
singlemode and multimode


1) 2)
IEC 61300-3-3 – Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss


1) 2)
IEC 61300-3-4 – Fibre optic interconnecting devices and EN 61300-3-4 2001
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation


1) 2)
IEC 61300-3-6 – Fibre optic interconnecting devices and EN 61300-3-6 2003
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss


1) 2)
IEC 61300-3-28 – Fibre optic interconnecting devices and EN 61300-3-28 2002
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss


1) 2)
IEC 61300-3-34 – Fibre optic interconnecting devices and EN 61300-3-34 2002
passive components - Basic test and
measurement procedures -
Part 3-34: Examinations and measurements -
Attenuation of random mated connectors


1)
IEC Guide 109 – Environmental aspects - Inclusion in – –
electrotechnical product standards


ISO 1998 Series Petroleum industry - Terminology – –

---------------------- Page: 8 ----------------------

SIST EN 61753-1:2010


INTERNATIONAL IEC


STANDARD 61753-1





First edition
2007-03


Fibre optic interconnecting devices and
passive components performance standard –
Part 1:
General and guidance for performance standards
© IEC 2007 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale W
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 9 ----------------------

SIST EN 61753-1:2010
– 2 – 61753-1 © IEC:2007(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6

1 Scope.7
2 Normative references.7
3 Terms and definitions .9
4 Preparation of a performance standard .10
4.1 Performance standard title.10
4.2 Tests.10
4.3 Details.11
4.4 Requirements .11
4.5 Sample size.11
4.6 Sample definition.11
4.7 Groupings/sequences .11
4.8 Pass/fail criteria.11
4.9 Reference product definition .11
4.10 Performance standard test report.11
4.11 Environmental aspects.12

Annex A (normative) Tests and severities for performance standards .13
Annex B (informative) Test sequencing for category O.34
Annex C (informative) Mixing of products with different performance category .37
Annex D (informative) Performance standard numbering .38
Annex E (informative) Minimum temperature value in Finland .39

Bibliography .40


Table A.1 – General operating service environments and performance categories .14
Table A.2 – Connectors and passive components – Category C – Controlled
environment .15
Table A.3 – Connectors and passive components – Category U – Uncontrolled
environment .16
Table A.4a – Passive components – Category O – Uncontrolled environment .18
Table A.4b – Connectors – Category O – Uncontrolled environment.19
Table A.5 – Connectors and passive components – Category E – Extreme environment .21
Table A.6 – Fibre management systems – Category C – Controlled environment .23
Table A.7 – Fibre management systems – Category U – Uncontrolled environment.24
Table A.8 – Closures – Category C – Controlled environment .25
Table A.9 – Closures – Category A – Aerial environment .26
Table A.10 – Closures – Category G – Ground environment .28
Table A.11 – Closures – Category S – Subterranean environment .30
Table A.12 – Connectors.32
Table A.13 – Passive optical components.32
Table A.14 – Fibre management systems .33

---------------------- Page: 10 ----------------------

SIST EN 61753-1:2010
61753-1 © IEC:2007(E) – 3 –
Table A.15 – Closures.33
Table B.1 – Test sequence for passive optical components category O.34
Table B.2 – Test sequence connectors category O .35

---------------------- Page: 11 ----------------------

SIST EN 61753-1:2010
– 4 – 61753-1 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS PERFORMANCE STANDARD –

Part 1: General and guidance for performance standards


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-1 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This first edition of IEC 61753-1 cancels and replaces Edition 1 of IEC 61753-1-1 published in
2000. It constitutes a technical revision.
Specific technical changes vis-à-vis IEC 61753-1-1:2000 include that this new edition covers all
passive fibre optic products, including connectors, passive optical components, fibre
management systems and closures.

---------------------- Page: 12 ----------------------

SIST EN 61753-1:2010
61753-1 © IEC:2007(E) – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2452/FDIS 86B/2498/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 61753 series, under the general title Fibre optic interconnecting
devices and passive components performance standards, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

___________
NOTICE
This document contains material that is Copyright © 2006, Telcordia Technologies, Inc.
("Telcordia"). All rights reserved.
The reader is advised that this IEC document and Telcordia source(s) may differ, and the
context and use of said material in this IEC document may differ from that of Telcordia.
TELCORDIA MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED,
WITH RESPECT TO THE SUFFICIENCY, ACCURACY, OR UTILITY OF ANY INFORMATION
OR OPINION CONTAINED HEREIN. ANY USE OF OR RELIANCE UPON SAID
INFORMATION OR OPINION IS AT THE RISK OF THE USER. TELCORDIA SHALL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY INCURRED BY ANY PERSON ARISING OUT OF
THE SUFFICIENCY, ACCURACY, OR UTILITY OF ANY INFORMATION OR OPINION
CONTAINED HEREIN.

---------------------- Page: 13 ----------------------

SIST EN 61753-1:2010
– 6 – 61753-1 © IEC:2007(E)
INTRODUCTION
Performance standards define the requirements for standard optical performance under a set
of specified conditions. Each standard contains a series or a set of tests and measurements
with clearly stated conditions, severities and pass/fail criteria. The series of tests, commonly
referred to as an operating service environment or performance category, is intended to be run
on a ‘one-off’ basis to prove the product’s ability to satisfy the requirements of a specific
application, market sector or user group.
The subsequent parts of this document define those sets of tests which form each operating
service environment or performance category and which have been standardised for
international use. A product that has been shown to meet all the requirements of a
performance standard may be declared as complying with that performance standard.
Products having the same classification from one manufacturer that satisfy a performance
standard will operate within the boundaries set by the performance standard. Intermateability or
interchangeability of products from different suppliers (having the same classification and
conforming to the same performance standard) can only be guaranteed when these products
are also meeting the interface standards. Only in this condition an equivalent level of
performance will be provided when they are used together (for example, in the case of optical
connectors).
Conformance to a performance standard is not a guarantee of lifetime assured performance or
reliability. Reliability testing must be the subject of a separate test schedule, where the tests
and severities selected are truly representative of the requirements of this reliability test
programme. Consistency of manufacture should be maintained using a recognised Quality
Assurance programme whilst the reliability of product should be evaluated using the
procedures recommended in IEC 62005.

---------------------- Page: 14 ----------------------

SIST EN 61753-1:2010
61753-1 © IEC:2007(E) – 7 –
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS PERFORMANCE STANDARD –

Part 1: General and guidance for performance standards



1 Scope
This part of IEC 61753 deals with performance standards for all passive fibre optic products,
including connectors, passive optical components, fibre management systems and closures.
The IEC 61753 series is published in multiple parts. This Part 1 covers general information on
performance standards. It defines those tests and severities which form the performance
categories or general operating service environments and identifies those tests which are
considered to be product specific. Test and severity details are given in Annex A. Part 1 also
includes references, definitions and rules for creating a performance standard, together with
informative annexes, such as a description of test sequencing given in Annex B, and other
pertinent information.
Subsequent parts which form IEC 61753 are known as performance standards and are
numbered according to the classification defined in Annex C. These standards contain the
minimum test and measurement severities which a specific product must satisfy, in order to be
categorized as meeting the requirements for us
...