Avalanche Beacons operating at 457 kHz - Transmitter-receiver systems - Part 2: Harmonised Standard for features for emergency services

The present document specifies technical characteristics and methods of measurements for avalanche beacons operating
at 457 kHz transmitter-receiver systems.
NOTE: The relationship between the present document and essential requirements of article 3.3g of
Directive 2014/53/EU [i.1] is given in annex A.

Lavinske žolne, ki delujejo v območju 457 kHz - Oddajno-sprejemni sistemi - 2. del: Harmonizirani standard za funkcije storitev v sili

Ta dokument določa tehnične lastnosti in merilne metode za lavinske žolne, ki delujejo v sistemih oddajnika-sprejemnika pri frekvenci 457 kHz.
OPOMBA: Razmerje med tem dokumentom in bistvenimi zahtevami člena 3.3g Direktive 2014/53/EU [i.1] je podano v dodatku A.

General Information

Status
Published
Public Enquiry End Date
17-Dec-2017
Publication Date
16-Jan-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Jan-2018
Due Date
22-Mar-2018
Completion Date
17-Jan-2018

Buy Standard

Standard
EN 300 718-2 V2.1.1:2018
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 300 718-2 V2.1.1 (2018-01) - Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 300 718-2 V2.1.0 (2017-09) - Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Avalanche Beacons operating at 457 kHz - Transmitter-receiver systems - Part 2: Harmonised Standard for features for emergency services33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipment13.200NDWDVWURIAccident and disaster controlICS:Ta slovenski standard je istoveten z:ETSI EN 300 718-2 V2.1.1 (2018-01)SIST EN 300 718-2 V2.1.1:2018en01-marec-2018SIST EN 300 718-2 V2.1.1:2018SLOVENSKI
STANDARD



SIST EN 300 718-2 V2.1.1:2018



=====ETSI EN 300 718-2 V2.1.1 (2018-01) Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services
HARMONISED EUROPEAN STANDARD SIST EN 300 718-2 V2.1.1:2018



ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 2 ===oeference=REN/ERM-TG28-512-2 heywords=harmonised standard, radio, safety, SAR, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE= Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM® and the GSM logo are trademarks registered and owned by the GSM Association. SIST EN 300 718-2 V2.1.1:2018



ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 3 Contents fntellectual=mroperty=oights=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=o coreword=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=o jodal=verbs=terminology=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=p k=pcope=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=q l=oeferences=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=q lhk=kormative=references=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=q lhl=fnformative=references=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=q m=aefinitionsf=symbols=and=abbreviations=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4=qechnical=requirements=specifications=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hk=bnvironmental=profile=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hl=bnvironmental=conformance=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhk=deneral=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhl=arop=test=on=hard=surface=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhlhk=aescription=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhlhl=jethod=of=measurement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhlhm=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhm=qemperature=tests=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlhmhk=deneral=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlhmhl=ary=heat=cycle=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlhmhm=iow=temperature=cycle=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlhmh4=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlh4=fmmersion=test=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlh4hk=jethod=of=measurement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlh4hl=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlho=polar=radiation=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhohk=jethod=of=measurement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhohl=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhp=qensile=test=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhphk=jethod=of=measurement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhphl=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hm=jechanical=and=electrical=design=conformance=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hmhk=lperational=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hmhl=jaintaining=the=transmit=mode=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hmhm=lperating=time=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmh4=Battery=check=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmho=Carrying=system=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmhp=lperating=instructions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmhq=phort=form=operating=instructions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmhr=lperating=and=storage=temperatures=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4h4=oadio=performance=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hk=qransmitter=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hkhk=jinimum=output=field=strength=begfieldc=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hl=oeceiver=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hlhk=Changes=in=the=received=signal=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hlhkhk=aefinitionhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hlhkhl=oequirement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl o=qest=conditionsf=power=sources=and=ambient=temperatures=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohk=kormal=and=extreme=test=conditions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohl=bxternal=test=power=sourcehhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohm=kormal=test=conditions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohmhk=kormal=temperature=and=humidity=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohmhl=kormal=test=voltage=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oh4=bxtreme=test=conditions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oh4hk=bxtreme=temperatures=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km SIST EN 300 718-2 V2.1.1:2018



ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 4 oh4hl=bxtreme=test=voltages=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oh4hlhk=deneral=requirement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oh4hlhl=mrocedure=for=tests=at=extreme=temperatures=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oho=jeasurement=uncertainty=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 15 Annex B (normative): Simulated solar radiation source . 16 Annex C (informative): Change history . 17 eistory=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kr == SIST EN 300 718-2 V2.1.1:2018



ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 5 Intellectual Property Rights Essential patents fmos=essential=or=potentially=essential=to=the=present=document=may=have=been=declared=to=bqpfh=qhe=information=pertaining=to=these=essential=fmosf=if=anyf=is=publicly=available=for=ETSI members and non-membersf=and=can=be=found=in=bqpf=po=jjj=mk4t="Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards"f=which=is=available=from=the=bqpf=pecretariath=iatest=updates=are=available=on=the=bqpf=teb=server=bhttpstiiiprhetsihorgich=mursuant=to=the=bqpf=fmo=molicyf=no=investigationf=including=fmo=searchesf=has=been=carried=out=by=bqpfh=ko=guarantee=can=be=given=as=to=the=existence=of=other=fmos=not=referenced=in=bqpf=po=jjj=mk4=bor=the=updates=on=the=bqpf=teb=serverc=which=aref=or=may=bef=or=may=becomef=essential=to=the=present=documenth=Trademarks qhe=present=document=may=include=trademarks=andior=tradenames=which=are=asserted=andior=registered=by=their=ownersh=bqpf=claims=no=ownership=of=these=except=for=any=which=are=indicated=as=being=the=property=of=bqpff=and=conveys=no=right=to=use=or=reproduce=any=trademark=andior=tradenameh=jention=of=those=trademarks=in=the=present=document=does=not=constitute=an=endorsement=by=bqpf=of=productsf=services=or=organizations=associated=with=those=trademarksh=Foreword qhis=earmonised=buropean=ptandard=bbkc=has=been=produced=by=bqpf=qechnical=Committee=blectromagnetic=compatibility=and=oadio=spectrum=jatters=bbojch=qhe=present=document=has=been=prepared=under=the=Commissionas=standardisation=request=Cbljkoc=omqp=final=xihlz=to=provide=one=voluntary=means=of=conforming=to=the=essential=requirements=of=airective=ljk4iomibr=on=the=harmonisation=of=the=laws=of=the=jember=ptates=relating=to=the=making=available=on=the=market=of=radio=equipment=and=repealing=airective=ksssioibC=xihkzh=lnce=the=present=document=is=cited=in=the=lfficial=gournal=of=the=buropean=rnion=under=that=airectivef=compliance=with=the=normative=clauses=of=the=present=document=given=in=table=Ahk=confersf=within=the=limits=of=the=scope=of=the=present=documentf=a=presumption=of=conformity=with=the=corresponding=essential=requirements=of=that=airective=and=associated=bcqA=regulationsh=qhe=present=document=implements=requirements=laid=down=in=Commission=aecision=ljjkik4ribC=xihmzh=qhe=present=document=is=part=l=of=a=multigpart=deliverableh=cull=details=of=the=entire=series=can=be=found=in=part=k=xkzh==National transposition dates aate=of=adoption=of=this=bkt=kr=aecember=ljkq=aate=of=latest=announcement=of=this=bk=bdoact=mk=jarch=ljkr=aate=of=latest=publication=of=new=kational=ptandard=or=endorsement=of=this=bk=bdopiect==mj=peptember=ljkr=aate=of=withdrawal=of=any=conflicting=kational=ptandard=bdowct=mj=peptember=ljks==SIST EN 300 718-2 V2.1.1:2018



ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 6 Modal verbs terminology fn=the=present=document="shall"f="shall not"f="should"f="should not"f="may"f="need not"f="will"f="will not"f="can"=and="cannot"=are=to=be=interpreted=as=described=in=clause=mhl=of=the=bqpf=arafting=oules=bserbal=forms=for=the=expression=of=provisionsch="must"=and="must not"=are=NOT=allowed=in=bqpf=deliverables=except=when=used=in=direct=citationh== SIST EN 300 718-2 V2.1.1:2018



ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 7 1 Scope qhe=present=document=specifies=technical=characteristics=and=methods=of=measurements=for=avalanche=beacons=operating=at=4oq=kez=transmittergreceiver=systemsh=klqbt=qhe=relationship=between=the=present=document=and=essential=requirements=of=article=mhmg=of=airective=ljk4iomibr=xihkz=is=given=in=annex=Ah=2 References
2.1 Normative references oeferences=are=specificf=identified=by=date=of=publication=andior=edition=number=or=version=numberh=lnly=the=cited=version=appliesh=oeferenced=documents=which=are=not=found=to=be=publicly=available=in=the=expected=location=might=be=found=at=httpstiidocboxhetsihorgioeferenceih=klqbt=thile=any=hyperlinks=included=in=this=clause=were=valid=at=the=time=of=publicationf=bqpf=cannot=guarantee=their=long=term=validityh=qhe=following=referenced=documents=are=necessary=for=the=application=of=the=present=documenth=xkz=bqpf=bk=mjj=qkrgk=bslhkhkc=bjkgljkrct="Avalanche=Beacons=operating=at=4oq=kez;=qransmittergreceiver=systems;=mart=kt=earmonised=standard=for=access=to=radio=spectrum"h=2.2 Informative references oeferences=are=either=specific=bidentified=by=date=of=publication=andior=edition=number=or=version=numberc=or=nongspecifich=cor=specific=referencesf=only=the=cited=version=appliesh=cor=nongspecific=referencesf=the=latest=version=of=the=referenced=document=bincluding=any=amendmentsc=appliesh=klqbt=thile=any=hyperlinks=included=in=this=clause=were=valid=at=the=time=of=publicationf=bqpf=cannot=guarantee=their=long=term=validityh=qhe=following=referenced=documents=are=not=necessary=for=the=application=of=the=present=document=but=they=assist=the=user=with=regard=to=a=particular=subject=areah=xihkz=airective=ljk4iomibr=of=the=buropean=marliament=and=of=the=Council=of=kp=April=ljk4=on=the=harmonisation=of=the=laws=of=the=jember=ptates=relating=to=the=making=available=on=the=market=of=radio=equipment=and=repealing=airective=ksssioibCh=xihlz=Commission=fmplementing=aecision=Cbljkoc=omqp=final=of=4hrhljko=on=a=standardisation=request=to=the=buropean=Committee=for=blectrotechnical=ptandardisation=and=to=the=buropean=qelecommunications=ptandards=fnstitute=as=regards=radio=equipment=in=support=of=airective=ljk4iomibr=of=the=buropean=marliament=and=of=the=Councilh=xihmz=Commission=aecision=ljjkik4ribC=of=lk=cebruary=ljjk=on=the=application=of=Article=mbmcbec=of=airective=ksssioibC=to=avalanche=beaconsh=xih4z=bk=pjjprglgogljkkt="bnvironmental=testingh=qestsh=qest=pah=pimulated=solar=radiation=at=ground=level=and=guidance=for=solar=radiation=testing"h=xihoz=bqpf=qo=kjj=jlr=ball=partsct="blectromagnetic=compatibility=and=oadio=spectrum=jatters=bbojc;=rncertainties=in=the=measurement=of=mobile=radio=equipment=characteristics"h=SIST EN 300 718-2 V2.1.1:2018



ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 8 3 Definitions, symbols and abbreviations cor=the=purposes=of=the=present=documentf=the=terms=and=definitionsf=symbols=and=abbreviations=given=in=bqpf=bk=mjj=qkrgk=xkzf=clause=mf=applyh=4 Technical requirements specifications 4.1 Environmental profile qhe=technical=requirements=of=the=present=document=apply=under=the=environmental=profile=for=operation=of=the=equipmentf=which=shall=be=declared=by=the=manufacturerh=qhe=equipment=shall=comply=with=all=the=technical=requirements=of=the=present=document=which=are=identified=as=applicable=in
...

ETSI EN 300 718-2 V2.1.1 (2018-01)






HARMONISED EUROPEAN STANDARD
Avalanche Beacons operating at 457 kHz;
Transmitter-receiver systems;
Part 2: Harmonised Standard for features
for emergency services

---------------------- Page: 1 ----------------------
2 ETSI EN 300 718-2 V2.1.1 (2018-01)



Reference
REN/ERM-TG28-512-2
Keywords
harmonised standard, radio, safety, SAR, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 300 718-2 V2.1.1 (2018-01)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Environmental conformance requirements . 8
4.2.1 General requirements . 8
4.2.2 Drop test on hard surface . 8
4.2.2.1 Description . 8
4.2.2.2 Method of measurement . 8
4.2.2.3 Requirements . 8
4.2.3 Temperature tests . 9
4.2.3.1 General . 9
4.2.3.2 Dry heat cycle . 9
4.2.3.3 Low temperature cycle . 9
4.2.3.4 Requirements . 9
4.2.4 Immersion test . 9
4.2.4.1 Method of measurement . 9
4.2.4.2 Requirements . 9
4.2.5 Solar radiation . 10
4.2.5.1 Method of measurement . 10
4.2.5.2 Requirements . 10
4.2.6 Tensile test . 10
4.2.6.1 Method of measurement . 10
4.2.6.2 Requirements . 10
4.3 Mechanical and electrical design conformance requirements . 10
4.3.1 Operational Requirements . 10
4.3.2 Maintaining the transmit mode . 10
4.3.3 Operating time . 11
4.3.4 Battery check . 11
4.3.5 Carrying system . 11
4.3.6 Operating instructions . 11
4.3.7 Short form operating instructions . 11
4.3.8 Operating and storage temperatures . 11
4.4 Radio performance requirements . 12
4.4.1 Transmitter requirements . 12
4.4.1.1 Minimum output field strength (H-field) . 12
4.4.2 Receiver requirements . 12
4.4.2.1 Changes in the received signal . 12
4.4.2.1.1 Definition. 12
4.4.2.1.2 Requirement . 12
5 Test conditions, power sources and ambient temperatures . 12
5.1 Normal and extreme test conditions . 12
5.2 External test power source. 12
5.3 Normal test conditions . 12
5.3.1 Normal temperature and humidity . 12
5.3.2 Normal test voltage . 13
5.4 Extreme test conditions . 13
5.4.1 Extreme temperatures . 13
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 300 718-2 V2.1.1 (2018-01)
5.4.2 Extreme test voltages . 13
5.4.2.1 General requirement . 13
5.4.2.2 Procedure for tests at extreme temperatures . 13
5.5 Measurement uncertainty . 13
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 15
Annex B (normative): Simulated solar radiation source . 16
Annex C (informative): Change history . 17
History . 18


ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 300 718-2 V2.1.1 (2018-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document implements requirements laid down in Commission Decision 2001/148/EC [i.3].
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 18 December 2017
Date of latest announcement of this EN (doa): 31 March 2018
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2018
Date of withdrawal of any conflicting National Standard (dow): 30 September 2019

ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 300 718-2 V2.1.1 (2018-01)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 300 718-2 V2.1.1 (2018-01)
1 Scope
The present document specifies technical characteristics and methods of measurements for avalanche beacons operating
at 457 kHz transmitter-receiver systems.
NOTE: The relationship between the present document and essential requirements of article 3.3g of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 718-1 (V2.1.1) (01-2018): "Avalanche Beacons operating at 457 kHz; Transmitter-
receiver systems; Part 1: Harmonised standard for access to radio spectrum".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.3] Commission Decision 2001/148/EC of 21 February 2001 on the application of Article 3(3)(e) of
Directive 1999/5/EC to avalanche beacons.
[i.4] EN 60068-2-5-2011: "Environmental testing. Tests. Test Sa. Simulated solar radiation at ground
level and guidance for solar radiation testing".
[i.5] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
ETSI

---------------------- Page: 7 ----------------------
8 ETSI EN 300 718-2 V2.1.1 (2018-01)
3 Definitions, symbols and abbreviations
For the purposes of the present document, the terms and definitions, symbols and abbreviations given in ETSI
EN 300 718-1 [1], clause 3, apply.
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the manufacturer. The equipment shall comply with all the technical
requirements of the present document which are identified as applicable in annex A at all times when operating within
the boundary limits of the declared operational environmental profile.
4.2 Environmental conformance requirements
4.2.1 General requirements
Environmental tests shall be carried out before tests of the same equipment in respect to the other requirements of the
present document are performed. The following tests shall be carried out in
...

Draft ETSI EN 300 718-2 V2.1.0 (2017-09)






HARMONISED EUROPEAN STANDARD
Avalanche Beacons operating at 457 kHz;
Transmitter-receiver systems;
Part 2: Harmonised Standard for features
for emergency services

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)



Reference
REN/ERM-TG28-512-2
Keywords
harmonised standard, radio, safety, SAR, testing

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2017.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Environmental conformance requirements . 8
4.2.1 General requirements . 8
4.2.2 Drop test on hard surface . 8
4.2.2.1 Description . 8
4.2.2.2 Method of measurement . 8
4.2.2.3 Requirements . 8
4.2.3 Temperature tests . 9
4.2.3.1 General . 9
4.2.3.2 Dry heat cycle . 9
4.2.3.3 Low temperature cycle . 9
4.2.3.4 Requirements . 9
4.2.4 Immersion test . 9
4.2.4.1 Method of measurement . 9
4.2.4.2 Requirements . 9
4.2.5 Solar radiation . 10
4.2.5.1 Method of measurement . 10
4.2.5.2 Requirements . 10
4.2.6 Tensile test . 10
4.2.6.1 Method of measurement . 10
4.2.6.2 Requirements . 10
4.3 Mechanical and electrical design conformance requirements . 10
4.3.1 Operational Requirements . 10
4.3.3 Maintaining the transmit mode . 10
4.3.4 Operating time . 11
4.3.5 Battery check . 11
4.3.6 Carrying system . 11
4.3.7 Operating instructions . 11
4.3.8 Short form operating instructions . 11
4.3.9 Operating and storage temperatures . 11
4.4 Radio performance requirements . 12
4.4.1 Transmitter requirements . 12
4.4.1.1 Minimum output field strength (H-field) . 12
4.4.2 Receiver requirements . 12
4.4.2.1 Changes in the received signal . 12
4.4.2.1.1 Definition. 12
4.4.2.1.2 Requirement . 12
5 Test conditions, power sources and ambient temperatures . 12
5.1 Normal and extreme test conditions . 12
5.2 External test power source. 12
5.3 Normal test conditions . 12
5.3.1 Normal temperature and humidity . 12
5.3.2 Normal test voltage . 13
5.4 Extreme test conditions . 13
5.4.1 Extreme temperatures . 13
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
5.4.2 Extreme test voltages . 13
5.4.2.1 General requirement . 13
5.4.2.2 Procedure for tests at extreme temperatures . 13
5.5 Measurement uncertainty . 13
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 15
Annex B (normative): Simulated solar radiation source . 16
Annex C (informative): Change History . 17
History . 18


ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM) and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document implements requirements laid down in Commission Decision 2001/148/EC [i.3].
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 6 ----------------------
7 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
1 Scope
The present document specifies technical characteristics and methods of measurements for avalanche beacons operating
at 457 kHz transmitter-receiver systems.
NOTE: The relationship between the present document and essential requirements of article 3.3g of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 718-1 (V2.1.0) (09-2017): "Avalanche Beacons operating at 457 kHz; Transmitter-
receiver systems; Part 1: Harmonised standard for access to radio spectrum".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.3] Commission Decision 2001/148/EC of 21 February 2001 on the application of Article 3(3)(e) of
Directive 1999/5/EC to avalanche beacons.
[i.4] EN 60068-2-5-2011: "Environmental testing. Tests. Test Sa. Simulated solar radiation at ground
level and guidance for solar radiation testing".
[i.5] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
ETSI

---------------------- Page: 7 ----------------------
8 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
3 Definitions, symbols and abbreviations
For the purposes of the present document, the terms and definitions, symbols and abbreviations given in ETSI
EN 300 718-1 [1], clause 3, apply.
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the manufacturer. The equipment shall comply with all the technical
requirements of the present document which are identified as applicable in annex A at all times when operating within
the boundary limits of the declared operational environmental profile.
4.2 Environmental conformance requirements
4.2.1 General requirements
E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.