In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)

2020-01-09: TC 23E requests BT to decouple the EN from the EMC Directive and publish the standard without delay -  to offer for LVD: partial compliance but all remarks have been implemented.
2019-10-01: CLC/TC 23E and CLC/TC 210 to coordinate to address the statistical methods.

Ladeleitungsintegrierte Steuer- und Schutzeinrichtung für die Ladebetriebsart 2 von Elektro-Straßenfahrzeugen (IC-CPD)

Appareil de contrôle et de protection intégré au câble pour la charge en mode 2 des véhicules électriques (IC-CPD)

No scope available

Integrirana zaščita kabla in zaščitna naprava tipa 2 za napajanje električnih cestnih vozil (IC-CPD)

General Information

Status
Published
Publication Date
04-Oct-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-May-2020
Due Date
18-Jul-2020
Completion Date
05-Oct-2020

RELATIONS

Buy Standard

Amendment
SIST EN 62752:2016/A1:2020
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 62752:2016/A1:2020
01-november-2020

Integrirana zaščita kabla in zaščitna naprava tipa 2 za napajanje električnih cestnih

vozil (IC-CPD)

In-cable control and protection device for mode 2 charging of electric road vehicles (IC-

CPD)

Ladeleitungsintegrierte Steuer- und Schutzeinrichtung für die Ladebetriebsart 2 von

Elektro-Straßenfahrzeugen (IC-CPD)

Appareil de contrôle et de protection intégré au câble pour la charge en mode 2 des

véhicules électriques (IC-CPD)
Ta slovenski standard je istoveten z: EN 62752:2016/A1:2020
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
43.120 Električna cestna vozila Electric road vehicles
SIST EN 62752:2016/A1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62752:2016/A1:2020
---------------------- Page: 2 ----------------------
SIST EN 62752:2016/A1:2020
EUROPEAN STANDARD EN 62752:2016/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 29.120.50
English Version
In-cable control and protection device for mode 2 charging of
electric road vehicles (IC-CPD)
(IEC 62752:2016/A1:2018)

Appareil de contrôle et de protection intégré au câble pour Ladeleitungsintegrierte Steuer- und Schutzeinrichtung für

la charge en mode 2 des véhicules électriques (IC-CPD) die Ladebetriebsart 2 von Elektro-Straßenfahrzeugen (IC-

(IEC 62752:2016/A1:2018) CPD)
(IEC 62752:2016/A1:2018)

This amendment A1 modifies the European Standard EN 62752:2016; it was approved by CENELEC on 2018-10-18. CENELEC members

are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a

national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62752:2016/A1:2020 E
---------------------- Page: 3 ----------------------
SIST EN 62752:2016/A1:2020
EN 62752:2016/A1:2020 (E)
European foreword

The text of document 23E/1055/FDIS, future IEC 62752/A1, prepared by SC 23E "Circuit-breakers

and similar equipment for household use" of IEC/TC 23 "Electrical accessories" was submitted to the

IEC-CENELEC parallel vote and approved by CENELEC as EN 62752:2016/A1:2020.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2020-11-08

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2023-05-08

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European

Commission and the European Free Trade Association, and supports essential requirements of EU

Directive(s).
For the relationship with EU Directive(s), see informative Annex ZZ.
Endorsement notice

The text of the International Standard IEC 62752:2016/A1:2018 was approved by CENELEC as a

European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 62752:2016/A1:2020
EN 62752:2016/A1:2020 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60065 (mod) - Audio, video and similar electronic EN 60065 2014
apparatus - Safety requirements
+ A11 2017
IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - EN 60068-2-1 2007
Test A: Cold
IEC 60068-2-5 - Environmental testing – Part 2-5: Tests – EN IEC 60068-2-5 2018
Test Sa: Simulated solar radiation at
ground level and guidance for solar
radiation testing
IEC 60068-2-11 - Basic environmental testing procedures - EN 60068-2-11 1999
Part 2-11: Tests - Test Ka: Salt mist
IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - EN 60068-2-27 2009
Test Ea and guidance: Shock
IEC 60068-2-30 - Environmental testing - Part 2-30: Tests - EN 60068-2-30 2005
Test Db: Damp heat, cyclic (12 h + 12 h
cycle)
IEC 60068-2-31 - Environmental testing - Part 2-31: Tests - EN 60068-2-31 2008
Test Ec: Rough handling shocks, primarily
for equipment-type specimens
IEC 60068-2-64 - Environmental testing - Part 2-64: Tests - EN 60068-2-64 2008
Test Fh: Vibration, broadband random and
guidance
+ A1 2019
IEC 60068-3-4 - Environmental testing - Part 3-4: EN 60068-3-4 2002
Supporting documentation and guidance -
Damp heat tests
IEC 60112 - Method for the determination of the proof EN 60112 2003
and the comparative tracking indices of
solid insulating materials
+ A1 2009
---------------------- Page: 5 ----------------------
SIST EN 62752:2016/A1:2020
EN 62752:2016/A1:2020 (E)
Publication Year Title EN/HD Year
IEC 60227 series Polyvinyl chloride insulated cables of rated EN 50525 series
voltages up to and including 450/750 V
IEC 60245 series Rubber insulated cables - Rated voltages EN 50525 series
up to and including 450/750 V
IEC 60309 series Plugs, socket-outlets and couplers for EN 60309 series
industrial purposes
IEC 60309-1 1999 Plugs, socket-outlets and couplers for EN 60309-1 1999
industrial purposes - Part 1: General
requirements
+ A1 (mod) 2005 + A1 2007
+ A2 2012 + A2 2012
IEC 60309-2 Plugs, socket-outlets and couplers for EN 60309-2 1999
industrial purposes - Part 2: Dimensional
interchangeability requirements for pin and
contact-tube accessories
+ A1 (mod) 2007
+ A2 2012

IEC 60364-4-44 2007 Low-voltage electrical installations - Part 4- HD 60364-4-442 2012

(mod) 44: Protection for safety - Protection
against voltage disturbances and
electromagnetic disturbances
IEC 60384-14 series Fixed capacitors for use in electronic EN 60384-14 series
equipment - Part 14: Sectional
specification – Fixed capacitors for
electromagnetic interference suppression
and connection to the supply mains
IEC 60417 1973 Graphical symbols for use on equipment. - -
Index, survey and compilation of the single
sheets.
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code)
- - + corrigendum 1993
May
IEC 60664-1 2007 Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems - Part 1:
Principles, requirements and tests
IEC 60664-3 - Insulation coordination for equipment EN 60664-3 2017
within low-voltage systems - Part 3: Use of
coating, potting or moulding for protection
against pollution
IEC 60695-2-10 - Fire hazard testing - Part 2-10: EN 60695-2-10 2013
Glowing/hot-wire based test methods -
Glow-wire apparatus and common test
procedure
Dated as no equivalent European Standard exists.
---------------------- Page: 6 ----------------------
SIST EN 62752:2016/A1:2020
EN 62752:2016/A1:2020 (E)
Publication Year Title EN/HD Year
IEC 60695-2-11 - Fire hazard testing - Part 2-11: EN 60695-2-11 2014
Glowing/hot-wire based test methods -
Glow-wire flammability test method for
end-products (GWEPT)
IEC 60884-1 2002 Plugs and socket-outlets for household and - -
similar purposes -- Part 1: General
requirements
+ A1 2006 - -
+ A2 2013 - -
IEC 61249-2 series Materials for printed boards and other EN 61249-2 series
interconnecting structures
IEC/TS 61439-7 2014 Low-voltage switchgear and controlgear - -
assemblies - Part 7: Assemblies for
specific applications such as marinas,
camping sites, market squares, electric
vehicles charging stations
IEC 61540 - Electrical accessories - Portable residual HD 639 S1 (mod) 2002
current devices without integral overcurrent
protection for household and similar use
(PRCDs)
- - + A1 2003
- - + corrigendum Jul. 2003
- - + A2 2010
IEC 61543 1995 Residual current-operated protective EN 61543 1995
devices (RCDs) for household and similar
use - Electromagnetic compatibility
+ A1 2004 - -
- - + corrigendum 1997
Dec.
- - + A11 2003
- - + A12 2005
+ A2 2005 + A2 2006
IEC 61851-1 2017 Electric vehicle conductive charging EN IEC 61851-1 2019
system - Part 1: General requirements
IEC 62196 series Plugs, socket-outlets, vehicle connectors EN 62196 series
and vehicle inlets - Conductive charging of
electric vehicles
IEC 62196-1 - Plugs, socket-outlets, vehicle connectors EN 62196-1 (mod) 2014
and vehicle inlets - Conductive charging of
electric vehicles - Part 1: General
requirements
IEC 62196-2 - Plugs, socket-outlets, vehicle connectors EN 62196-2 2017
and vehicle inlets - Conductive charging of
electric vehicles - Part 2: Dimensional
compatibility and interchangeability
requirements for a.c. pin and contact-tube
accessories
---------------------- Page: 7 ----------------------
SIST EN 62752:2016/A1:2020
EN 62752:2016/A1:2020 (E)
Publication Year Title EN/HD Year
CISPR 14 series Electromagnetic compatibility - EN 55014 series
Requirements for household appliances,
electric tools and similar apparatus
CISPR 14-1 2016 Electromagnetic compatibility - EN 55014-1 2017
Requirements for household appliances,
electric tools and similar apparatus - Part
1: Emission
- - + A11 2020
ISO 178 2019 Plastics – Determination of flexural EN ISO 178 2019
properties
ISO 179 series Plastics - Determination of Charpy impact EN ISO 179 series
properties
ISO 179-1 - Plastics – Determination of Charpy impact EN ISO 179-1 2010
properties – Part 1: Non-instrumented
impact test
ISO 2409 - Paints and varnishes - Cross-cut test EN ISO 2409 2013
ISO 4628-3 - Paints and varnishes - Evaluation of EN ISO 4628-3 2016
degradation of coatings - Designation of
quantity and size of defects, and of
intensity of uniform changes in appearance
- Part 3: Assessment of degree of rusting
ISO 4892-2 2013 Plastics - Methods of exposure to EN ISO 4892-2 2013
laboratory light sources - Part 2: Xenon-arc
lamps
ISO 16750-5 2010 Road vehicles_- Environmental conditions - -
and testing for electrical and electronic
equipment_- Part_5: Chemical loads
ISO 17409 2015 Electrically propelled road vehicles - - -
Connection to an external electric power
supply - Safety requirements
---------------------- Page: 8 ----------------------
SIST EN 62752:2016/A1:2020
EN 62752:2016/A1:2020 (E)
Annex ZZ
(informative)
Relationship between this European standard and the safety
objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be
covered

This European Standard has been prepared under a Commission’s standardization request relating to

harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means

of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the

Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the

making available on the market of electrical equipment designed for use within certain voltage limits

[2014 OJ L96].

Once this standard is cited in the Official Journal of the European Union under that Directive,

compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of

the scope of this standard, a presumption of conformity with the corresponding essential requirements

of that Directive, and associated EFTA regulations.
Table ZZ.1 – Correspondence between this European standard and Article 3 of
Directive 2014/35/EU [2014 OJ L153]
Clause(s) / sub-clause(s)
Safety Objectives of Directive
Remarks / Notes
of this EN
2014/35/EU
(1)(a) 1, 2, 3, 4, 5, 6 and 9.3
(1)(b) 8.1, 8.2, 8.3, 9.4, 9.6, 9.20,
9.21, 9.22, 9.23, 9.24 and 9.25
(1)(c) 7, 9.1 and 9.2 plus Annex B
(2) (a) 8.5, 8.8, 8.6, 8.9, 8.15, 8.16,
8.23, 8.22, 9.4, 9.5, 9.7, 9.7.7,
9.7.10, 9.8, 9.13, 9.15, 9.16 and
9.14 plus Annex A
(2) (b) 8.7, 8.9, 8.10, 8.17, 9.6, 9.8 and
9.9 plus Annex A
(2) (c) 8.4.2, 8.14, 9.7 and 9.13
(2) (d) 8.4.3, 8.6, 8.19, 9.5, 9.19, 9.27,
9.28 and 9.34 plus Annex C
(3) (a) 8.11, 8.18, 8.25, 9.10, 9.17,
9.18, 9.29, 9.32 and 9.36
(3) (b) 8.12, 8.13, 8.16, 8.20, 8.21,
8.24, 9.7.3.7, 9.7.3.8, 9.11,
9.12, 9.16, 9.26, 9.29, 9.30,
9.31, 9.32, 9.33, 9.34 and 9.35
(3) (c) 8.7, 8.10, 9.6 and 9.10

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European

standard is maintained in the list published in the Official Journal of the European Union. Users of this

standard should consult frequently the latest list published in the Official Journal of the European

Union.

WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of

this standard.
---------------------- Page: 9 ----------------------
SIST EN 62752:2016/A1:2020
---------------------- Page: 10 ----------------------
SIST EN 62752:2016/A1:2020
IEC 62752
Edition 1.0 2018-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
In-cable control and protection device for mode 2 charging of electric road
vehicles (IC-CPD)
Appareil de contrôle et de protection intégré au câble pour la charge en mode 2
des véhicules électriques (IC-CPD)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.50 ISBN 978-2-8322-5975-7

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 11 ----------------------
SIST EN 62752:2016/A1:2020
– 2 – IEC 62752:2016/AMD1:2018
© IEC 2018
FOREWORD

This amendment has been prepared by subcommittee 23E: Circuit-breakers and similar

equipment for household use, of IEC technical committee 23: Electrical accessories.

The text of this amendment is based on the following documents:
FDIS Report on voting
23E/1055/FDIS 23E/1072/RVD

Full information on the voting for the approval of this amendment can be found in the report

on voting indicated in the above table.

The committee has decided that the contents of this amendment and the base publication will

remain unchanged until the stability date indicated on the IEC website under

"http://webstore.iec.ch" in the data related to the specific publication. At this date, the

publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
CONTENTS
Add the following new headings:
4.6 Classification according to the usage
4.6.1 IC-CPD for portable use
4.6.2 IC-CPD for wall mounting
4.6.3 IC-CPD for portable use and for wall mounting
9.10.5 Verification requirements for IC-CPD according to 4.6.2 and 4.6.3
FOREWORD
Delete the existing Note.
---------------------- Page: 12 ----------------------
SIST EN 62752:2016/A1:2020
IEC 62752:2016/AMD1:2018 – 3 –
© IEC 2018
INTRODUCTION
Delete the last paragraph.
1 Scope
Replace the first bullet point of the third paragraph by the following:

• has a control pilot function controller in accordance with IEC 61851-1:2017, Annex A;

Add, after the last paragraph, the following new paragraph:

The IC-CPD is not considered to be a protective device for use in fixed installations.

2 Normative references
Replace the reference to IEC 61851-1:2010 by the following:
IEC 61851-1:2017, Electric vehicle conductive charging system – Part 1: General
requirements
Add the following new references:
IEC TS 61439-7:2014, Low-voltage switchgear and controlgear assemblies – Part 7:
Assemblies for specific applications such as marinas, camping sites, market
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.