Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010)

ISO 18274:2010 specifies requirements for classification of solid wire electrodes, solid strip electrodes or solid rods for fusion welding of nickel and nickel alloys. The classification of the solid wire electrodes, solid strip electrodes or solid rods is based on their chemical composition.

Schweißzusätze - Draht- und Bandelektroden, Massivdrähte und -stäbe zum Schmelzschweißen von Nickel und Nickellegierungen - Einteilung (ISO 18274:2010)

Diese Internationale Norm legt Anforderungen für die Einteilung von Massivdrähten, Massivbändern und
Massivstäben zum Schmelzschweißen von Nickel und Nickellegierungen fest. Die Einteilung der
Massivdrähte, Massivbänder und Massivstäbe erfolgt nach ihrer chemischen Zusammensetzung.

Produits consommables pour le soudage - Fils-électrodes et feuillards, fils et baguettes pour le soudage par fusion du nickel et des alliages de nickel - Classification (ISO 18274:2010)

L'ISO 18274:2010 spécifie les exigences de classification des fils-électrodes pleins, feuillards pleins, fils pleins et baguettes pleines pour le soudage par fusion du nickel et des alliages de nickel. La classification des fils-électrodes pleins, feuillards pleins, fils pleins et baguettes pleines est basée sur leur composition chimique.

Dodajni materiali za varjenje - Žične in tračne elektrode, žice in palice za talilno varjenje niklja in nikljevih zlitin - Razvrstitev (ISO 18274:2010)

Ta mednarodni standard določa zahteve za razvrščanje žičnih elektrod, tračnih elektrod, žic in palic za talilno varjenje niklja in nikljevih zlitin. Razvrščanje žičnih elektrod, tračnih elektrod, žic in palic temelji na njihovi kemični sestavi.

General Information

Status
Withdrawn
Public Enquiry End Date
24-Jul-2009
Publication Date
28-Nov-2011
Withdrawal Date
07-Jun-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-May-2023
Due Date
15-Jun-2023
Completion Date
08-Jun-2023

Relations

Buy Standard

Standard
EN ISO 18274:2012
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 18274:2009
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18274:2012
01-januar-2012
1DGRPHãþD
SIST EN ISO 18274:2004
SIST EN ISO 18274:2004/AC:2007
'RGDMQLPDWHULDOL]DYDUMHQMHäLþQHLQWUDþQHHOHNWURGHåLFHLQSDOLFH]DWDOLOQR
YDUMHQMHQLNOMDLQQLNOMHYLK]OLWLQ5D]YUVWLWHY ,62
Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of
nickel and nickel alloys - Classification (ISO 18274:2010)
Schweißzusätze - Draht- und Bandelektroden, Massivdrähte und -stäbe zum
Schmelzschweißen von Nickel und Nickellegierungen - Einteilung (ISO 18274:2010)
Produits consommables pour le soudage - Fils-électrodes et feuillards, fils et baguettes
pour le soudage par fusion du nickel et des alliages de nickel - Classification (ISO
18274:2010)
Ta slovenski standard je istoveten z: EN ISO 18274:2010
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
SIST EN ISO 18274:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 18274:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 18274:2012


EUROPEAN STANDARD
EN ISO 18274

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2010
ICS 25.160.20 Supersedes EN ISO 18274:2004
English Version
Welding consumables - Solid wire electrodes, solid strip
electrodes, solid wires and solid rods for fusion welding of nickel
and nickel alloys - Classification (ISO 18274:2010)
Produits consommables pour le soudage - Fils-électrodes Schweißzusätze - Draht- und Bandelektroden,
pleins, feuillards pleins, fils pleins et baguettes pleines pour Massivdrähte und -stäbe zum Schmelzschweißen von
le soudage par fusion du nickel et des alliages de nickel - Nickel und Nickellegierungen - Einteilung (ISO 18274:2010)
Classification (ISO 18274:2010)
This European Standard was approved by CEN on 14 December 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18274:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 18274:2012
EN ISO 18274:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 18274:2012
EN ISO 18274:2010 (E)
Foreword
This document (EN ISO 18274:2010) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at
the latest by June 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 18274:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 18274:2010 has been approved by CEN as a EN ISO 18274:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 18274:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 18274:2012

INTERNATIONAL ISO
STANDARD 18274
Second edition
2010-12-15


Welding consumables — Solid wire
electrodes, solid strip electrodes, solid
wires and solid rods for fusion welding of
nickel and nickel alloys — Classification
Produits consommables pour le soudage — Fils-électrodes pleins,
feuillards pleins, fils pleins et baguettes pleines pour le soudage
par fusion du nickel et des alliages de nickel — Classification





Reference number
ISO 18274:2010(E)
©
ISO 2010

---------------------- Page: 7 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Classification .1
4 Symbols and requirements .1
4.1 Symbols for the product form.1
4.2 Symbol for the chemical composition .2
5 Mechanical properties of the weld metal .9
6 Chemical analysis .9
7 Rounding procedure .9
8 Retest.9
9 Technical delivery conditions .9
10 Designation .9
Annex A (informative) Description of consumables classes .11
Annex B (informative) System for designation of welding filler metals.18
Annex C (informative) Corresponding national classifications and typical weld metal tensile
strengths .19
Bibliography.24

© ISO 2010 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 18274 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 3, Welding consumables.
This second edition cancels and replaces the first edition (ISO 18274:2004), of which it constitutes a
technical revision. It also incorporates the Technical Corrigenda ISO 18274:2004/Cor.1:2005 and
ISO 18274:2004/Cor.2:2006.
Requests for official interpretation of any aspect of this International Standard should be directed to the
Secretariat of ISO/TC 44/SC 3 via your national standards body. A complete listing of these bodies can be
found at www.iso.org.
iv © ISO 2010 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
Introduction
For nickel welding consumables, there is no unique relationship between the product form (solid wire
electrode, solid strip electrode, solid wire or solid rod) and the welding process used (e.g. gas shielded metal
arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding, strip overlay welding,
laser welding or other welding processes). For this reason, the solid wire electrode, solid strip electrode, solid
wire or solid rod may be classified on the basis of any of the above product forms and can be used as
appropriate, for more than one of the above processes.

© ISO 2010 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 18274:2012

---------------------- Page: 12 ----------------------

SIST EN ISO 18274:2012
INTERNATIONAL STANDARD ISO 18274:2010(E)

Welding consumables — Solid wire electrodes, solid strip
electrodes, solid wires and solid rods for fusion welding
of nickel and nickel alloys — Classification
1 Scope
This International Standard specifies requirements for classification of solid wire electrodes, solid strip
electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. The classification of the
solid wire electrodes, solid strip electrodes, solid wires and solid rods is based on their chemical composition.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 544, Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of
product, dimensions, tolerances and markings
ISO 14344, Welding consumables — Procurement of filler materials and fluxes
ISO 80000-1:2009, Quantities and units — Part 1:General
3 Classification
The classification is divided into two parts:
a) the first part indicates the product form, being solid wire electrode, solid strip electrode, solid wire or solid
rod, see 4.1;
b) the second part gives a numerical symbol indicating the chemical composition of the solid wire electrode,
solid strip electrode, solid wire or solid rod, see Table 1.
4 Symbols and requirements
4.1 Symbols for the product form
The symbol for the solid wire electrode, solid wire or solid rod shall be “S”. The symbol for the solid strip
electrode shall be “B”.
NOTE One product form can be used for more than one welding process.
© ISO 2010 – All rights reserved 1

---------------------- Page: 13 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
4.2 Symbol for the chemical composition
The initial symbol “Ni" in Table 1 identifies the welding consumable as a nickel base alloy. The following four
digits indicate the chemical composition of the solid wire electrode, solid strip electrode, solid wire or solid rod,
determined under conditions given in Clause 6. The first digit is an indicator of the alloy group as follows:
⎯ 1 significant molybdenum addition without significant chromium addition (nickel-molybdenum alloys);
⎯ 2 no significant alloy addition;
⎯ 4 significant copper addition (nickel-copper alloys);
⎯ 5 significant copper additions with aluminium and titanium for precipitation hardening;
⎯ 6 significant chromium addition, with iron less than 25 % (by mass) (nickel-chromium-iron and nickel-
chromium-molybdenum alloys);
⎯ 7 same as 6, but with aluminium and titanium for precipitation hardening;
⎯ 8 significant chromium addition, with iron more than 25 % (by mass) (nickel-iron-chromium alloys).
The remaining digits indicate the alloy composition of the welding consumable. A description of common uses
of each welding consumable alloy is given in Annex A. The basis of the system of designation is described in
Annex B.
NOTE In addition, the chemical symbol can be used.

2 © ISO 2010 – All rights reserved

---------------------- Page: 14 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
© ISO 2010 – All rights reserved 3
Table 1 — Symbols and chemical composition requirements for solid wire electrodes, solid strip electrodes, solid wires and solid rods
a
Alloy symbols Chemical composition, % (by mass)

b c d, e
Numerical Chemical C Mn Fe Si Cu Ni Co Al Ti Cr Nb Mo W Others
Nickel
Ni 2061 NiTi3 0,15 1,0 1,0 0,7 0,25 W92,0 — 1,5 2,0 — — — — P 0,03
to 3,5
Nickel-Copper
Ni 4060 NiCu30Mn3Ti 0,15 4,0 2,5 1,2 28,0 W62,0 — 1,2 1,5 — 0,3 — — —
to 32,0 to 3,0
Ni 4061 NiCu30Mn3Nb 0,15 4,0 2,5 1,25 28,0 W60,0 — 1,0 1,0 — 3,0 — — —
to 32,0
Ni 5504 NiCu25Al3Ti 0,25 1,5 2,0 1,0 W20,0 63,0 — 2,0 0,3 — — — — P 0,03
to 70,0 to 4,0 to 1,0
Nickel-Chromium
Ni 6072 NiCr44Ti 0,01 0,20 0,50 0,20 0,50 W52,0 — — 0,3 42,0 — — — —
to 0,10 to 1,0 to 46,0
NI 6073 NiCr38AlNbTi 0,03 0,50 1,0 0,30 0,30 W63,0 1,0 0,75 0,25 36,0 to 0,25 0,50 — P 0,02
to 1,20 to 0,75 39,0 to 1,00 S 0,015
B 0,003
Zr 0,02
Ni 6076 NiCr20 0,08 1,0 2,00 0,30 0,50 W75,0 — 0,4 0,15 19,0 — — — P 0,03
to 0,15 to 0,50 to 21,0
Ni 6082 NiCr20Mn3Nb 0,10 2,5 3,0 0,5 0,5 W67,0 — — 0,7 18,0 2,0 — — P 0,03
to 3,5 to 22,0 to 3,0
Nickel-Chromium-Iron
Ni 6002 NiCr21Fe18Mo9 0,05 1,0 17,0 1,0 0,5 W44,0 0,5 — — 20,5 — 8,0 0,2 P 0,04
to 0,15 to 20,0 to 2,5 to 23,0 to 10,0 to 1,0 S 0,03
Ni 6025 NiCr25Fe10AlY 0,15 0,5 8,0 0,5 0,1 W59,0 1,0 1,8 0,1 24,0 — — — Y 0,05
to 0,25 to 11,0 to 2,4 to 0,2 to 26,0 to 0,12;
Zr 0,01
to 0,10

---------------------- Page: 15 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
4 © ISO 2010 – All rights reserved
Table 1 (continued)
)a
Alloy symbols Chemical composition, % (by mass

b c d, e
Numerical Chemical C Mn Fe Si Cu Ni Co Al Ti Cr Nb Mo W Others
Ni 6030 NiCr30Fe15Mo5W 0,03 1,5 13,0 0,8 1,0 W36,0 5,0 — — 28,0 0,3 4,0 1,5 P 0,04
to 17,0 to 2,4 to 31,5 to 1,5 to 6,0 to 4,0 S 0,02
Ni 6043 NiCr30Fe9Nb2 0,04 3,0 7,0 0,5 0,30 W54,0 — 0,50 0,5 28,0 1,0 0,50 — —
to 12,0 to 31,5 to 2,5
Ni 6045 NiCr28Fe23Si3 0,05 1,0 21,0 2,5 0,3 W40,0 1,0 0,30 — 26,0 — — — P 0,020
to 0,12 to 25,0 to 3,0 to 29,0 S 0,010
Ni 6052 NiCr30Fe9 0,04 1,0 7,0 0,5 0,3 W54,0 — 1,1 1,0 28,0 0,10 0,5 — Al + Ti < 1,5
to 11,0 to 31,5
Ni 6054 NiCr29Fe9 0,04 1,0 7,0 0,50 0,30 W51,0 0,12 1,10 1,0 28,0 0,5 0,50 — P 0,02
to 11,0 to 31,5 to 1,0 S 0,015
Ni 6055 NiCr29Fe5Mo4Nb3 0,03 1,0 14,4 0,50 0,30 52,0 0,10 0,50 0,50 28,5 2,1 3,0 to — P 0,02
to 62,0 to 31,0 to 4,0 5,0 S 0,015
B 0,003
Zr 0,02
Ni 6062 NiCr15Fe8Nb 0,08 1,0 6,0 0,3 0,5 W70,0 — — — 14,0 1,5 — — P 0,03
to 10,0 to 17,0 to 3,0
Ni 6176 NiCr16Fe6 0,05 0,5 5,5 0,5 0,1 W76,0 0,05 — — 15,0 — — — —
to 7,5 to 17,0
Ni 6601 NiCr23Fe15Al 0,10 1,0 20,0 0,5 1,0 58,0 — 1,0 — 21,0 — — — P 0,03
to 63,0 to 1,7 to 25,0
Ni 6693 NiCr29Fe4Al3 0,15 1,0 2,5 0,5 0,5 W53,0 — 2,5 1,0 27,0 0,5 — — P 0,03
to 6,0 to 4,0 to 31,0 to 2,5 S 0,01
Ni 6701 NiCr36Fe7Nb 0,35 0,5 to 7,0 0,5 to — 42,0 — — — 33,0 0,8 — — —
to 0,50 2,0 2,0 to 48,0 to 39,0 to 1,8
Ni 6975 NiCr25Fe13Mo6 0,03 1,0 10,0 1,0 0,7 W47,0 — — 0,70 to 23,0 — 5,0 — P 0,03
to 17,0 to 1,2 1,50 to 26,0 to 7,0 S 0,03
Ni 6985 NiCr22Fe20Mo7Cu2 0,01 1,0 18,0 1,0 1,5 W40,0 5,0 — — 21,0 0,50 6,0 1,5 P 0,04
to 21,0 to 2,5 to 23,5 to 8,0 S 0,03

---------------------- Page: 16 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
© ISO 2010 – All rights reserved 5
Table 1 (continued)
a
Alloy symbols Chemical composition, % (by mass)

b c d, e
Numerical Chemical C Mn Fe Si Cu Ni Co Al Ti Cr Nb Mo W Others
Ni 7069 NiCr15Fe7Nb 0,08 1,0 5,0 0,50 0,50 W70,0 — 0,4 2,0 14,0 0,70 — — P 0,03
to 9,0 to 1,0 to 2,7 to 17,0 to 1,20
Ni 7092 NiCr15Ti3Mn 0,08 2,0 8,0 0,3 0,5 W 67,0 — — 2,5 14,0 — — — P 0,03
to 2,7 to 3,5 to 17,0
Ni 7718 NiCr19Fe19Nb5Mo3 0,08 0,3 24,0 0,3 0,3 50,0 — 0,2 0,7 17,0 4,8 2,8 — B 0,006
to 55,0 to 0,8 to 1,1 to 21,0 to 5,5 to 3,3 P 0,015
Ni 8025 NiFe30Cr29Mo 0,02 1,0 30,0 0,5 1,5 35,0 — 0,2 1,0 27,0 — 2,5 — —
to 3,0 to 3,0 to 40,0 to 31,0 to 4,5
Ni 8065 NiFe30Cr21Mo3 0,05 1,0 W22,0 0,5 1,5 38,0 — 0,2 0,6 19,5 — 2,5 — P 0,03
to 3,0 to 46,0 to 1,2 to 23,5 to 3,5 S 0,03
Ni 8125 NiFe26Cr25Mo 0,02 1,0 30,0 0,5 1,5 37,0 — 0,2 1,0 23,0 — 3,5 — —
to 3,0 to 3,0 to 42,0 to 27,0 to 7,5
Nickel-Molybdenum
Ni 1001 NiMo28Fe 0,08 1,0 4,0 1,0 0,5 W55,0 2,5 — — 1,0 — 26,0 1,0 V 0,20
to 7,0 to 30,0 to 0,40
S 0,03
Ni 1003 NiMo17Cr7 0,04 1,0 5,0 1,0 0,50 W65,0 0,20 — — 6,0 — 15,0 0,50 V 0,50
to 0,08 to 8,0 to 18,0 S 0,02
Ni 1004 NiMo25Cr5Fe5 0,12 1,0 4,0 1,0 0,5 W62,0 2,5 — — 4,0 — 23,0 to 1,0 V 0,60
to 7,0 to 6,0 26,0 P 0,04
S 0,03
Ni 1008 NiMo19WCr 0,1 1,0 10,0 0,50 0,50 W60,0 — — — 0,5 — 18,0 2,0 to —
to 3,5 to 21,0 4,0
Ni 1009 NiMo20WCu 0,1 1,0 5,0 0,5 0,3 W65,0 — 1,0 — — — 19,0 2,0 to —
to 1,3 to 22,0 4,0
Ni 1024 NiMo25 0,03 0,80 2,0 0,80 0,50 W59,0 1,0 0,50 — 7,0 — 24,0 — P 0,030
to 9,0 to 26,0 S 0,015

---------------------- Page: 17 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
6 © ISO 2010 – All rights reserved
Table 1 (continued)
a
Alloy symbols Chemical composition, % (by mass)

b c d, e
Numerical Chemical C Mn Fe Si Cu Ni Co Al Ti Cr Nb Mo W Others
Ni 1062 NiMo24Cr8Fe6 0,01 1,0 5,0 0,1 0,5 W62,0 — 0,5 — 6,0 — 21,0 — —
to 8,0 to 10,0 to 25,0
Ni 1066 NiMo28 0,02 1,0 2,0 0,1 0,5 W64,0 1,0 — 0,5 1,0 — 26,0 1,0 P 0,04
to 30,0 S 0,03
Ni 1067 NiMo30Cr 0,01 3,0 1,0 0,1 0,2 W65,0 3,0 0,5 0,2 1,0 0,2 27,0 3,0 V 0,20
to 3,0 to 3,0 to 32,0 P 0,03
Ni 1069 NiMo28Fe4Cr 0,01 1,0 2,0 0,1 0,5 W65,0 1,0 0,1 0,3 0,5 0,5 26,0 — —
to 5,0 to 0,5 to 1,5 to 30,0
Nickel-Chromium-Molybdenum
Ni 6012 NiCr22Mo9 0,05 1,0 3,0 0,5 0,5 W58,0 — 0,4 0,4 20,0 1,5 8,0 — —
to 23,0 to 10,0
Ni 6022 NiCr21Mo13Fe4W3 0,01 0,5 2,0 0,08 0,5 W49,0 2,5 — — 20,0 — 12,5 2,5 V 0,3
to 6,0 to 22,5 to 14,5 to 3,5
Ni 6035 NiCr33Mo8 0,05 0,5 2,0 0,6 0,30 W49,0 1,00 0,40 0,20 32,25 0,50 7,60 0,60 V 0,20
to to 9,00 P 0,030
34,25 S 0,015
Ni 6057 NiCr30Mo11 0,02 1,0 2,0 1,0 — W53,0 — — — 29,0 — 10,0 — V 0,4
to 31,0 to 12,0 P 0,04
S 0,03
Ni 6058 NiCr21Mo20 0,01 0,5 1,5 0,10 0,50 W52,0 0,3 0,4 — 20,0 — 19,0 0,3 N 0,02
to 23,0 to 21,0 to 0,15
P 0,015
S 0,010
Ni 6059 NiCr23Mo16 0,01 0,5 1,5 0,1 0,5 W56,0 0,3 0,1 0,5 22,0 — 15,0 — V 0,3
to 0,4 to 24,0 to 16,5
Ni 6200 NiCr23Mo16Cu2 0,01 0,5 3,0 0,08 1,3 W52,0 2,0 0,5 — 22,0 — 15,0 — P 0,025
to 1,9 to 24,0 to 17,0
Ni 6205 NiCr25Mo16 0,03 0,5 1,0 0,5 0,2 W55,0 0,2 0,4 0,4 24,0 — 14,0 0,3 —
to 26,0 to 16,0

---------------------- Page: 18 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
© ISO 2010 – All rights reserved 7
Table 1 (continued)
a
Alloy symbols Chemical composition, % (by mass)

b c d, e
Numerical Chemical C Mn Fe Si Cu Ni Co Al Ti Cr Nb Mo W Others
Ni 6276 NiCr15Mo16Fe6W4 0,02 1,0 4,0 0,08 0,5 W50,0 2,5 — — 14,5 — 15,0 3,0 V 0,35
to 7,0 to 16,5 to 17,0 to 4,5 P 0,04
S 0,03
Ni 6452 NiCr20Mo15 0,01 1,0 1,5 0,1 0,5 W56,0 — — — 19,0 0,4 14,0 — V 0,4
to 21,0 to 16,0
Ni 6455 NiCr16Mo16Ti 0,01 1,0 3,0 0,08 0,5 W56,0 2,0 — 0,7 14,0 — 14,0 0,5 P 0,04
to 18,0 to 18,0 S 0,03
Ni 6625 NiCr22Mo9Nb 0,1 0,5 5,0 0,5 0,5 W58,0 — 0,4 0,4 20,0 3,2 8,0 — —
to 23,0 to 4,1 to 10,0
Ni 6650 NiCr20Fe14Mo11WN 0,03 0,5 12,0 0,5 0,3 W44,0 1,0 0,05 to — 19,0 0,05 9,5 0,5 N 0,05
to 16,0 0,50 to 21,0 to 0,50 to 12,5 to 2,5 to 0,20;
S 0,010
V 0,30
Ni 6660 NiCr22Mo10W3 0,03 0,5 2,0 0,5 0,3 W58,0 0,2 0,4 0,4 21,0 0,2 9,0 2,0 —
to 23,0 to 11,0 to 4,0
Ni 6686 NiCr21Mo16W4 0,01 1,0 5,0 0,08 0,5 W49,0 — 0,5 0,25 19,0 — 15,0 3,0 S 0,02
to 23,0 to 17,0 to 4,4
Ni 7725 NiCr21Mo8Nb3Ti 0,03 0,3 W8,0 0,20 — 55,0 — 0,35 1,0 19,0 2,75 7,0 — —
to 59,0 to 1,7 to 22,5 to 4,00 to 9,5
Nickel-Chromium-Cobalt
Ni 6160 NiCr28Co30Si3 0,02 1,0 3,5 2,4 0,5 W30,0 27,0 0,40 0,2 26,0 0,3 0,7 0,5 P 0,03
to 0,10 to 3,0 to 32,0 to 0,6 to 29,0
Ni 6617 NiCr22Co12Mo9 0,05 1,0 3,0 1,0 0,5 W44,0 10,0 0,8 0,6 20,0 — 8,0 0,5 P 0,03
to 0,15 to 15,0 to 1,5 to 24,0 to 10,0
f
Ni 7090 NiCr20Co18Ti3 0,13 1,0 1,5 1,0 0,2 W50,0 15,0 1,0 2,0 18,0 — — —
to 18,0 to 2,0 to 3,0 to 21,0

---------------------- Page: 19 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
8 © ISO 2010 – All rights reserved
Table 1 (continued)
a
Alloy symbols Chemical composition, % (by mass)

b c d, e
Numerical Chemical C Mn Fe Si Cu Ni Co Al Ti Cr Nb Mo W Others
Ni 7263 NiCr20Co20Mo6Ti2 0,04 0,6 0,7 0,4 0,2 W47,0 19,0 0,3 1,9 19,0 — 5,6 — Al+Ti 2,4
to 0,08 to 21,0 to 0,6 to 2,4 to 21,0 to 6,1 to 2,8,
S u0,007,
Ag u0,000 5,
B u0,005,

Bi u0,000 1
Nickel-Chromium-Tungsten
Ni 6231 NiCr22W14Mo2 0,05 0,3 3,0 0,25 0,50 W48,0 5,0 0,2 — 20,0 —— 1,0 13,0 P 0,03
to 0,15 to 1,0 to 0,75 to 0,5 to 24,0 to 3,0 to 15,0

Any other agreed composition
g
Any other agreed composition with a minimum nickel content greater than the minimum value for any other element
Ni Z

a
Single values for all elements are maxima except where the W sign is used.

b
Up to 1 % (by mass) of the nickel content can be cobalt unless otherwise specified. For certain applications, lower cobalt levels may be required and should be agreed between contracting
parties.

c
Up to 20 % (by mass) of the niobium content can be tantalum.

d
The total of unspecified elements shall not exceed 0,5 % (by mass).

e
Phosphorus 0,020 % (by mass) maximum and sulfur 0,015 % (by mass) maximum unless otherwise stated.

f
Ag u 0,000 5 % (by mass), B u0,020 % (by mass), Bi u0,000 1 % (by mass), Pb u0,002 0 % (by mass), Zr u0,15 % (by mass).

g
Consumables for which the chemical composition is not listed shall be symbolized similarly and prefixed by the letters Ni Z. The chemical composition ranges are not specified and it is
possible that two electrodes with the same Z-classification are not interchangeable.

NOTE Corresponding national classifications are shown in Annex C.

---------------------- Page: 20 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
5 Mechanical properties of the weld metal
Mechanical properties of the weld metal are not part of the classification.
NOTE Information on typical weld metal tensile strengths, where they exist, can be found in Annex C.
6 Chemical analysis
Chemical analysis shall be performed on specimens of the product or the stock from which it is made. Any
analytical technique can be used, but in case of dispute, reference shall be made to established published
methods, agreed between the contracting parties.
NOTE 1 The shielding gas or flux can influence the chemical composition of the all-weld metal as compared to the
chemical analysis of the product or stock.
NOTE 2 See Annex B.
7 Rounding procedure
For purposes of determining compliance with the requirements of this International Standard, the actual test
values obtained shall be subjected to the rounding rules of ISO 80000-1:2009, Annex B, Rule A. If the
measured values are obtained by equipment calibrated in units other than those of this International Standard,
the measured values shall be converted to the units of this International Standard before rounding. If an
average value is to be compared to the requirements of this International Standard, rounding shall be done
only after calculating the average. In the case where the testing standard cited in the normative references of
this International Standard contains instructions for rounding that conflict with the instructions of this
International Standard, the rounding requirements of the testing standard shall apply. The rounded results
shall fulfil the requirements of the appropriate table for the classification under test.
8 Retest
If any test fails to meet the requirement, that test shall be repeated twice. The results of both retests shall
meet the requirement. Specimens for the retest may be taken from the original test sample or from a new test
sample. For chemical analysis, retest need only be for those specific elements that failed to meet their test
requirement. If the results of one or both retests fail to meet the requirement, the material under test shall be
considered as not meeting the requirements of this International Standard for that classification.
In the event that, during preparation or after completion of any test, it is clearly determined that prescribed or
proper procedures were not followed in preparing the weld test sample or test specimen(s), or in conducting
the tests, the test shall be considered invalid, without regard to whether the test was actually completed or
whether the test results met, or failed to meet, the requirement. That test shall be repeated, following proper
prescribed procedures. In this case, the requirement for doubling the number of test specimens does not
apply.
9 Technical delivery conditions
Technical delivery conditions shall meet the requirements of ISO 544 and ISO 14344.
10 Designation
The designation of solid wire electrodes, solid strip electrodes, solid wires and solid rods shall follow the
principle given in the examples below.
© ISO 2010 – All rights reserved 9

---------------------- Page: 21 ----------------------

SIST EN ISO 18274:2012
ISO 18274:2010(E)
EXAMPLE 1 A solid wire (S) for gas shielded metal arc welding having a chemical composition within the limits for the
alloy symbol 6625 (NiCr22Mo9Nb) of Table 1 is designated:
ISO 18274 – S Ni 6625
or alternatively
ISO 18274 – S Ni 6625 (NiCr22Mo9Nb)
EXAMPLE 2 A solid rod (S) for gas tungsten arc welding is designated:
ISO 18274 – S Ni 6625
o
...

SLOVENSKI STANDARD
oSIST prEN ISO 18274:2009
01-julij-2009
'RGDMQLPDWHULDOL]DYDUMHQMHäLþQHLQWUDþQHHOHNWURGHåLFHLQSDOLFH]DWDOLOQR
YDUMHQMHQLNOMDLQQLNOMHYLK]OLWLQ5D]YUVWLWHY ,62',6
Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of
nickel and nickel alloys - Classification (ISO/DIS 18274:2009)
Schweißzusätze - Draht- und Bandelektroden, Massivdrähte und -stäbe zum
Schmelzschweißen von Nickel und Nickellegierungen - Einteilung (ISO/DIS 18274:2009)
Produits consommables pour le soudage - Fils-électrodes et feuillards, fils et baguettes
pour le soudage par fusion du nickel et des alliages de nickel - Classification (ISO/DIS
18274:2009)
Ta slovenski standard je istoveten z: prEN ISO 18274
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
oSIST prEN ISO 18274:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 18274:2009

---------------------- Page: 2 ----------------------
oSIST prEN ISO 18274:2009
EUROPEAN STANDARD
DRAFT
prEN ISO 18274
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2009
ICS 25.160.20 Will supersede EN ISO 18274:2004
English Version
Welding consumables - Wire and strip electrodes, wires and
rods for fusion welding of nickel and nickel alloys - Classification
(ISO/DIS 18274:2009)
Produits consommables pour le soudage - Fils-électrodes Schweißzusätze - Massivdrähte, -bänder und -stäbe zum
et feuillards, fils et baguettes pour le soudage par fusion du Schmelzschweißen von Nickel und Nickellegierungen -
nickel et des alliages de nickel - Classification (ISO/DIS Einteilung (ISO/DIS 18274:2009)
18274:2009)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 18274:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 18274:2009
prEN ISO 18274:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 18274:2009
prEN ISO 18274:2009 (E)
Foreword
This document (prEN ISO 18274:2009) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 18274:2004.
Endorsement notice
The text of ISO/DIS 18274:2009 has been approved by CEN as a prEN ISO 18274:2009 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 18274:2009

---------------------- Page: 6 ----------------------
oSIST prEN ISO 18274:2009
DRAFT INTERNATIONAL STANDARD ISO/DIS 18274
ISO/TC 44/SC 3 Secretariat: ANSI
Voting begins on: Voting terminates on:
2009-04-23 2009-09-23
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Welding consumables — Wire and strip electrodes, wires and
rods for fusion welding of nickel and nickel alloys —
Classification
Produits consommables pour le soudage — Fils-électrodes et feuillards, fils et baguettes pour le soudage par
fusion du nickel et des alliages de nickel — Classification
[Revision of the first edition (ISO 18274:2004) and ISO 18274:2004/Cor.1:2005 and
ISO 18274:2004/Cor.2:2006]
ICS 25.160.20

ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2009

---------------------- Page: 7 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2009 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Classification .1
4 Symbols and requirements .1
4.1 Symbols for the product form.1
4.2 Symbol for the chemical composition .1
5 Mechanical properties of the weld metal .9
6 Chemical analysis .9
7 Rounding off procedure.9
8 Retest.9
9 Technical delivery conditions .9
10 Designation .9
Annex A (informative) Description of consumable classes .11
Annex B (informative) System for designation of welding filler metals.18
Annex C (informative) Corresponding national classifications and typical weld metal tensile
strengths .19
Bibliography.23

© ISO 2009 – All rights reserved iii

---------------------- Page: 9 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
ISO 18274 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 3, Welding consumables.
This second edition cancels and replaces the first edition which has been technically revised.
Requests for official interpretation of any aspect of this International Standard should be directed to the
Secretariat of ISO/TC 44/SC 3 via the member body in the user's country, a complete listing of which can be
found at www.iso.org.
iv © ISO 2009 – All rights reserved

---------------------- Page: 10 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
Introduction
For nickel welding consumables there is no unique relationship between the product form (solid wire, strip or
rod) and the welding process used (e.g. gas-shielded metal arc welding, gas tungsten arc welding, plasma arc
welding, submerged arc welding, strip overlay welding, laser welding or other welding processes). For this
reason the solid wire, strip or rod may be classified on the basis of any of the above product forms and can be
used as appropriate, for more than one of the above processes.
© ISO 2009 – All rights reserved v

---------------------- Page: 11 ----------------------
oSIST prEN ISO 18274:2009

---------------------- Page: 12 ----------------------
oSIST prEN ISO 18274:2009
DRAFT INTERNATIONAL STANDARD ISO/DIS 18274

Welding consumables — Wire and strip electrodes, wires and
rods for fusion welding of nickel and nickel alloys —
Classification
1 Scope
This International Standard specifies requirements for classification of solid wires, strips and rods for fusion
welding of nickel and nickel alloys. The classification of the solid wires, strips and rods is based on their
chemical composition.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 31-0:1992, Quantities and units – Part 0: General principles
ISO 544, Welding consumables – Technical delivery conditions for welding filler metals – Type of product,
dimensions, tolerances and markings
ISO 14344, Welding and allied processes – Flux and gas shielded electrical welding processes – Procurement
guidelines for consumables
3 Classification
The classification is divided into two parts:
a) the first part indicates the product form being solid wires, strips or rods, see 4.1;
b) the second part gives a numerical symbol indicating the chemical composition of the solid wire, strip or
rod, see Table 1.
4 Symbols and requirements
4.1 Symbols for the product form
The symbol for the solid wire and rod shall be S and for the solid strip it shall be B.
NOTE One product form may be used for more than one welding process.
4.2 Symbol for the chemical composition
The numerical symbol in Table 1 indicates the chemical composition of a solid wire, strip or rod, determined
under conditions given in clause 6. The first digit is an indicator of the alloy group as follows:
© ISO 2009 – All rights reserved 1

---------------------- Page: 13 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
⎯ 1 Significant molybdenum addition without significant chromium addition (nickel-molybdenum alloys);
⎯ 2 No significant alloy addition;
⎯ 4 Significant copper addition (nickel-copper alloys);
⎯ 5 Significant copper additions with aluminium and titanium for precipitation hardening;
⎯ 6 Significant chromium addition, with iron less than 25% (nickel-chromium-iron and nickel-chromium-
molybdenum alloys);
⎯ 7 Same as 6, but with aluminium and titanium for precipitation hardening;
⎯ 8 Significant chromium addition, with iron more than 25% (nickel-iron-chromium alloys).
The remaining digits indicate the particular alloy deposited. The basis of the system of designation is
described in annex B (informative).
NOTE In addition the chemical symbol may be used.
2 © ISO 2009 – All rights reserved

---------------------- Page: 14 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
Table 1 — Symbols and chemical composition requirements for solid wires, strips and rods
a b
Alloy symbols Chemical composition in % (m/m)
c c d e f
Numerical Chemical C Mn Fe Si Cu Ni Co Al Ti Cr Nb Mo W Others
NICKEL
Ni 2061 NiTi3 0,15 1,0 1,0 0,7 0,25 Min. 92,0 – 1,5 2,0 to – – – – P 0,03
3,5
NICKEL – COPPER
Ni 4060 NiCu30Mn3Ti 0,15 4,0 2,5 1,2 28,0 to Min. 62,0 – 1,2 1,5 to – 0,3 – – –
32,0 3,0
Ni 4061 NiCu30Mn3Nb 0,15 4,0 2,5 1,25 28,0 to Min. 60,0 – 1,0 1,0 – 3,0 – – –
32,0
Ni 5504 NiCu25Al3Ti 0,25 1,5 2,0 1,0 Min. 20,0 63,0 to – 2,0 to 0,3 to – – – – P 0,03
70,0 4,0 1,0
NICKEL – CHROMIUM
Ni 6072 NiCr44Ti 0,01 to 0,20 0,50 0,20 0,50 Min. 52,0 – – 0,3 to 42,0 to – – – –
0,10 1,0 46,0
NI 6073 NiCr38AlNbTi 0,03 0,50 1,0 0,30 0,30 Min. 63,0 1,0 0,75 0,25 to 36,0 to 0,25 0,50 – P 0,02
to 0,75 39,0 to S 0,015
1,20 1,00 B 0,003
Zr 0,02
Ni 6076 NiCr20 0,08 to 1,0 2,00 0,30 0,50 Min. 75,0 – 0,4 0,15 to 19,0 to – – – P 0,03
0,15 0,50 21,0
Ni 6082 NiCr20Mn3Nb 0,10 2,5 to 3,5 3,0 0,5 0,5 Min. 67,0 – – 0,7 18,0 to 2,0 to – – P 0,03
22,0 3,0
NICKEL – CHROMIUM – IRON
Ni 6002 NiCr21Fe18Mo9 0,05 to 1,0 17,0 to 1,0 0,5 Min. 44,0 0,5 to – – 20,5 to – 8,0 to 10,0 0,2 to P 0,04
0,15 20,0 2,5 23,0 1,0 S 0,03
Ni 6025 NiCr25Fe10AlY 0,15 to 0,5 8,0 to 0,5 0,1 Min. 59,0 1,0 1,8 to 0,1 to 24,0 to – – – Y 0,05 to 0,12;
0,25 11,0 2,4 0,2 26,0
Zr 0,01 to 0,10

© ISO 2009 – All rights reserved 3

---------------------- Page: 15 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
Table 1 — Symbols and chemical composition requirements for solid wires, strips and rods
a b
Alloy symbols Chemical composition in % (m/m)
c c d e f
Numerical Chemical C Mn Fe Si Cu Ni Co Al Ti Cr Nb Mo W Others
Ni 6030 NiCr30Fe15Mo5W 0,03 1,5 13,0 to 0,8 1,0 to 2,4 Min. 36,0 5,0 – – 28,0 to 0,3 to 4,0 to 6,0 1,5 to P 0,04
17,0 31,5 1,5 4,0 S 0,02
Ni 6045 NiCr28Fe23Si3 0,05 to 1,0 21,0 to 2,5 to 3,0 0,3 Min 40,0 1,0 0,30 – 26,0 to – – – P 0,02
0,12 25,0 29,0 S 0,01
Ni 6052 NiCr30Fe9 0,04 1,0 7,0 to 0,5 0,3 Min. 54,0 – 1,1 1,0 28,0 to 0,10 0,5 – Al + Ti < 1,5
11,0 31,5
0,04 1,0 7,0 to 0,50 0,3 Min. 52,00,12 1,10 1,0 28,0 to 0,5 0,50 –
Ni 6054 NiCr29Fe9 P 0,02
11,0 31.5
S 0,015
Ni 6055 NiCr29Fe5Mo4Nb3 0,03 1,0 Bal 0,50 0,30 52,0 to 0,10 0,50 0,50 28,5 to 2,1 to 3,0 to 5,0 – P 0,02
62,0 31,0 4,0 S 0,015
B 0,003
Zr 0,02
UNS NiCr30Fe9Nb2 0,04 2,0 7,0 to 0,5 0,30 Min. 54,0 – 0,50 0,5 28,5 to 1,0 to 0,50 – –
requested 12,0 31,5 2,5
Ni 6062 NiCr15Fe8Nb 0,08 1,0 6,0 to 0,3 0,5 Min. 70,0 – – – 14,0 to 1,5 to – – P 0,03
10,0 17,0 3,0
Ni 6176 NiCr16Fe6 0,05 0,5 5,5 to 7,5 0,5 0,1 Min. 76,0 0,05 – – 15,0 to – – – –
17,0
Ni 6601 NiCr23Fe15Al 0,10 1,0 20,0 0,5 1,0 58,0 to – 1,0 to – 21,0 to – – – P 0,03
63,0 1,7 25,0
Ni 6693 NiCr29Fe4Al3 0,15 1,0 2,5 to 6,0 – –
0,5 0,5 Min. 50,0 – 2,5 to 1,0 27,0 to 0,5 to P 0,03
4,0 31,0 2,5 S 0,01
Ni 6701 NiCr36Fe7Nb 0,35 to 0,5 to 2,0 7,0 0,5 to 2,0 – 42,0 to – – – 33,0 to 0,8 to – – –
0,50 48,0 39,0 1,8
Ni 6975 NiCr25Fe13Mo6 0,03 1,0 10,0 to 1,0 0,7 to 1,2 Min. 47,0 – – 0,70 to 23,0 to – 5,0 to 7,0 – P 0,03
17,0 1,50 26,0 S 0,03
Ni 6985 NiCr22Fe20Mo7Cu2 0,01 1,0 18,0 to 1,0 1,5 to 2,5 Min. 40,0 5,0 – – 21,0 to 0,50 6,0 to 8,0 1,5 P 0,04
21,0 23,5 S 0,03
4 © ISO 2009 – All rights reserved

---------------------- Page: 16 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
Table 1 — Symbols and chemical composition requirements for solid wires, strips and rods
a
Alloy symbols
Chemical composition in % (m/m)

b b c d, e
Numerical Chemical C Mn Fe Si Cu Al Ti Cr Mo W
Ni Co Nb Others
Ni 7069 NiCr15Fe7Nb 0,08 1,0 5,0 to 9,0 0,50 0,50 Min. 70,0 – 0,4 to 2,0 to 14,0 to 0,70 – – P 0,03
1,0 2,7 17,0 to
1,20
Ni 7092 NiCr15Ti3Mn 0,08 2,0 to 2,7 8,0 0,3 0,5 Min. 67,0 – – 2,5 to 14,0 to – – – P 0,03
3,5 17,0
Ni 7718 NiCr19Fe19Nb5Mo3 0,08 0,3 24,0 0,3 0,3 50,0 to – 0,2 to 0,7 to 17,0 to 4,8 to 2,8 to 3,3 – B 0,006, P
55,0 0,8 1,1 21,0 5,5 0,015
Ni 8025 NiFe30Cr29Mo 0,02 1,0 to 3,0 30,0 0,5 1,5 to 3,0 35,0 to – 0,2 1,0 27,0 to – 2,5 to 4,5 – –
40,0 31,0
Ni 8065 NiFe30Cr21Mo3 0,05 1,0 Min. 22,0 0,5 1,5 to 3,0 38,0 to – 0,2 0,6 to 19,5 to – 2,5 to 3,5 – P 0,03
46,0 1,2 23,5 S 0,03
Ni 8125 NiFe26Cr25Mo 0,02 1,0 to 3,0 30,0 0,5 1,5 to 3,0 37,0 to – 0,2 1,0 23,0 to – 3,5 to 7,5 – –
42,0 27,0
NICKEL – MOLYBDENUM
Ni 1001 NiMo28Fe 0,08 1,0 4,0 to 7,0 1,0 0,5 Min. 55,02,5 – – 1,0 – 26,0 to 30,0 1,0 V 0,20 to 0,40
S 0,03
Ni 1003 NiMo17Cr7 0,04 to 1,0 5,0 1,0 0,50 Min. 65,0 0,20 – – 6,0 to – 15,0 to 18,0 0,50 V 0,50
0,08 8,0 S 0,02
Ni 1004 NiMo25Cr5Fe5 0,12 1,0 4,0 to 7,0 1,0 0,5 Min. 62,0 2,5 – – 4,0 to – 23,0 to 26,0 1,0 V 0,60
6,0 P 0,04
S 0,03
Ni 1008 NiMo19WCr 0,1 1,0 10,0 0,50 0,50 Min. 60,0 – – – 0,5 to – 18,0 to 21,0 2,0 to –
3,5 4,0
Ni 1009 NiMo20WCu 0,1 1,0 5,0 0,5 0,3 to 1,3 Min. 65,0 – 1,0 – – – 19,0 to 22,0 2,0 to –
4,0
Ni 1024 NiMo25 0,03 0,80 2,0 24,0 to 26,0 –
0,80 0,5 Min. 59,0 1,0 0,50 – 7,0 to – P 0,03
9,0 S 0,015

© ISO 2009 – All rights reserved 5

---------------------- Page: 17 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
Table 1 — Symbols and chemical composition requirements for solid wires, strips and rods
a
Alloy symbols
Chemical composition in % (m/m)

b b c d, e
Numerical Chemical C Mn Fe Si Cu Al Ti Cr Mo W
Ni Co Nb Others
Ni 1062 NiMo24Cr8Fe6 0,01 1,0 5,0 to 8,0 0,1 0,5 Min. 62,0 – 0,5 – 6,0 to – 21,0 to 25,0 – –
10,0
Ni 1066 NiMo28 0,02 1,0 2,0 0,1 0,5 Min. 64,0 1,0 – 0,5 1,0 – 26,0 to 30,0 1,0 P 0,04
S 0,03
Ni 1067 NiMo30Cr 0,01 3,0 1,0 to 3,0 0,1 0,2 Min. 65,0 3,0 0,5 0,2 1,0 to 0,2 27,0 to 32,0 3,0 V 0,20
3,0 P 0,03
Ni 1069 NiMo28Fe4Cr 0,01 1,0 2,0 to 5,0 0,1 0,5 Min. 65,0 1,0 0,1 to 0,3 0,5 to 0,5 26,0 to 30,0 – –
0,5 1,5
NICKEL – CHROMIUM – MOLYBDENUM
Ni 6012 NiCr22Mo9 0,05 1,0 3,0 0,5 0,5 Min. 58,0 – 0,4 0,4 20,0 to 1,5 8,0 to 10,0 – –
23,0
Ni 6022 NiCr21Mo13Fe4W3 0,01 0,5 2,0 to 6,0 0,08 0,5 Min. 49,0 2,5 – – 20,0 to – 12,5 to 14,5 2,5 to V 0,3
22,5 3,5
Ni 6035 NiCr33Mo8 0,05 0,5 2,0 0,6 0,30 Min. 60,01,00
Ni 6057 NiCr30Mo11 0,02 1,0 2,0 1,0 – Min. 53,0 – – – 29,0 to – 10,0 to 12,0 – V 0,4
31,0 P 0,04
S 0,03
0,01 0,5 1,5 0,10 0,50 Min. 52,0 0,3 0,4
Ni 6058 NiCr21Mo20 – 20,0 to – 19,0 to 21,0 0,3 N 0,02 to 0,15
23,0 P 0,015
S 0,01
Ni 6059 NiCr23Mo16 0,01 0,5 1,5 0,1 0,5 Min. 56,0 0,3 0,1 to 0,5 22,0 to – 15,0 to 16,5 – V 0,3
0,4 24,0
Ni 6200 NiCr23Mo16Cu2 0,01 0,5 3,0 0,08 1,3 to 1,9 Min. 52,0 2,0 0,5 – 22,0 to – 15,0 to 17,0 – P 0,25
24,0
Ni 6205 NiCr25Mo16 0,03 0,5 1,0 0,5 0,2 Min. 55,0 0,2 0,4 0,4 24,0 to – 14,0 to 16,0 0,3 –
26,0

6 © ISO 2009 – All rights reserved

---------------------- Page: 18 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
Table 1 — Symbols and chemical composition requirements for solid wires, strips and rods
a
Alloy symbols
Chemical composition in % (m/m)

b b c d, e
Numerical Chemical C Mn Fe Si Cu Al Ti Cr Mo W
Ni Co Nb Others
Ni 6276 NiCr15Mo16Fe6W4 0,02 1,0 4,0 to 7,0 0,08 0,5 Min. 50,0 2,5 – – 14,5 to – 15,0 to 17,0 3,0 to V 0,35
16,5 4,5 P 0,04
S 0,03
Ni 6452 NiCr20Mo15 0,01 1,0 1,5 0,1 0,5 Min. 56,0 – – – 19,0 to 0,4 14,0 to 16,0 – V 0,4
21,0
Ni 6455 NiCr16Mo16Ti 0,01 1,0 3,0 0,08 0,5 Min. 56,0 2,0 – 0,7 14,0 to – 14,0 to 18,0 0,5 P 0,04
18,0 S 0,03
Ni 6625 NiCr22Mo9Nb 0,1 0,5 5,0 0,5 0,5 Min. 58,0 – 0,4 0,4 20,0 to 3,2 to 8,0 to 10,0 – –
23,0 4,1
Ni 6650 NiCr20Fe14Mo11WN 0,03 0,5 12,0 to 0,5 0,3 Min. 45,01,0 0,05 – 19,0 to 0,05 9,5 to 12,5 0,5 to N 0,05 to 0,20;
16,0 to 21,0 to 2,5 S 0,010
0,50 0,50 V 0,30
Ni 6660 NiCr22Mo10W3 0,03 0,5 2,0 0,5 0,3 Min. 58,0 0,2 0,4 0,4 21,0 to 0,2 9,0 to 11,0 2,0 to –
23,0 4,0
Ni 6686 NiCr21Mo16W4 0,01 1,0 5,0 0,08 0,5 Min. 49,0 – 0,5 0,25 19,0 to – 15,0 to 17,0 3,0 to S 0,02
23,0 4,4
Ni 7725 NiCr21Mo8Nb3Ti 0,03 0,3 Min. 8,0 0,20 – 55,0 to – 0,35 1,0 to 19,0 to 2,75 7,0 to 9,5 – –
59,0 1,7 22,5 to
4,00
NICKEL – CHROMIUM – COBALT
Ni 6160 NiCr28Co30Si3 0,02 to 1,0 3,5 2,4 to 3,0 0,5 Min. 30,0 27,0 to 0,40 0,2 to 26,0 to 0,3 0,7 0,5 P 0,03
0,10 32,0 0,6 29,0
Ni 6617 NiCr22Co12Mo9 0,05 to 1,0 3,0 1,0 0,5 Min. 44,0 10,0 to 0,8 to 0,6 20,0 to – 8,0 to 10,0 0,5 0,03
0,15 15,0 1,5 24,0
g
Ni 7090 NiCr20Co18Ti3 0,13 1,0 1,5 1,0 0,2 Min. 50,0 15,0 to 1,0 to 2,0 to 18,0 to – – –
18,0 2,0 3,0 21,0
Ni 7263 NiCr20Co20Mo6Ti2 0,04 to 0,6 0,7 0,4 0,2 Min. 47,0 19,0 to 0,3 to 1,9 to 19,0 to – 5,6 to 6,1 – Al+Ti 2,4 to 2,8

f
0,08 21,0 0,6 2,4 21,0
© ISO 2009 – All rights reserved 7

---------------------- Page: 19 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
Table 1 — Symbols and chemical composition requirements for solid wires, strips and rods
a
Alloy symbols
Chemical composition in % (m/m)

b b c d, e
Numerical Chemical C Mn Fe Si Cu Al Ti Cr Mo W
Ni Co Nb Others
NICKEL – CHROMIUM – TUNGSTEN
Ni 6231 NiCr22W14Mo2 0,05 to 0,3 to 1,0 3,0 0,25 to 0,50 Min. 48,0 5,0 0,2 to – 20,0 to – 1,0 to 3,0 13,0 to P 0,03
0,15 0,75 0,5 24,0 15,0
ANY OTHER AGREED COMPOSITION
h

NiZ

a
Single values for all elements are maximum except where marked as Min. (minimum).

b
Up to 1 % of the Ni content can be Co unless otherwise specified. For certain applications lower Co levels may be required and should be agreed between contracting parties.

c
Up to 20 % of the Nb content can be Ta.

d
The total of unspecified elements shall not exceed 0,5 %.

e
P 0,020 % maximum and S 0,015 % maximum unless otherwise stated.

f
S ≤ 0,007, Ag ≤ 0,0005, B ≤ 0,005, Bi ≤ 0,0001.

g
Ag ≤ 0,0005, B ≤ 0,020, Bi ≤ 0,0001, Pb ≤ 0,0020, Zr ≤ 0,15.

h
Consumables for which the chemical composition is not listed in the table shall be symbolised similarly and prefixed by the letter Z. The chemical composition ranges are not specified and
therefore two electrodes with the same Z-classification may not be interchangeable.

NOTE Corresponding national classifications are shown in annex C.

8 © ISO 2009 – All rights reserved

---------------------- Page: 20 ----------------------
oSIST prEN ISO 18274:2009
ISO/DIS 18274
5 Mechanical properties of the weld metal
Mechanical properties of the weld metal are not part of the classification.
6 Chemical analysis
Chemical analysis shall be performed on specimens of the product or the stock from which it is made. Any
analytical technique can be used, but in case of dispute reference shall be made to established published
methods, agreed between the contracting parties.
NOTE 1 The influence of the shielding gas or flux on the chemical composition of the all-weld metal is to be considered.
Differences between the chemical composition of the all-weld metal and the solid wire or rod, may occur.
NOTE 2 See annex B.
7 Rounding off procedure
For purposes of determining compliance with the requirements of this document, the actual test values
obtained shall be subjected to the rounding-off rules of Annex B, of ISO 31-0:1992, Rule A. If the measured
values are obtained by equipment calibrated in units other than those of this document, the measured values
shall be converted to the units of this document before rounding off. If an average value is to be compared to
the requirements of this document, rounding off shall be done only after calculating the average. In the case
where the testing standard cited in the normative references of this document contains instructions for
rounding off that conflict with the instructions of this document, the rounding off requirements of the testing
standard shall apply. The rounded-off results shall fulfil the requirements of the appropriate table for the
classification under test.
8 Retest
If any test fails to meet the requirement, that test shall be repeated twice. The results of both retests shall
meet the requirement. Specimens for the retest may be taken from the original test sample or from a new test
sample. For chemical analysis, retest need be only for those specific elements that failed to meet their test
requirement. If the results of one or both retests fail to meet the requirement, the material under test shall be
considered as not meeting the requirements of this specification for that classification.
In the event that, during preparation or after completion of any test, it is clearly determined that prescribed or
proper procedures were not followed in preparing the weld test sample or test specimen(s), or in conducting
the tests, the test shall be considered invalid, without regard to whether the test was actually completed, or
whether the test results met, or failed to meet, the requirement. That test shall be repeated, following proper
prescribed procedures. In this case, the requirement for doubling the number of test specimens does not
apply.
9 Technical delivery conditions
Technical delivery conditions shall meet the requirements in ISO 544 and ISO 143
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.