Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:2019)

This Standard describes a hydraulic method for the determination of bursting strength and bursting distension of textile fabrics. In this document, a hydraulic pressure is applied using a constant rate of pumping device. The method is applicable to knitted, woven, nonwoven and laminated fabrics. It can be suitable for fabrics produced by other techniques. The test is suitable for test specimens in the conditioned or wet state. From the available data, there appears to be no significant difference in the bursting strength results achieved using hydraulic or pneumatic burst testers, for pressures up to 800 kPa. This pressure range covers the majority of performance levels expected of general apparel. For speciality textiles requiring high bursting pressures, the hydraulic apparatus is more suitable.

Textilien - Bersteigenschaften von textilen Flächengebilden - Teil 1: Hydraulisches Verfahren zur Bestimmung von Berstdruck und Berstwölbung (ISO 13938-1:2019)

Dieses Dokument beschreibt ein hydraulisches Verfahren zur Bestimmung von Berstdruck und Berstwölbung textiler Flächengebilde.
In diesem Dokument wird hydraulischer Druck mit konstanter Fördermenge aufgebracht.
ANMERKUNG   ISO 13938 2 beschreibt ein Prüfverfahren mit pneumatischem Druck.
Das Prüfverfahren ist anzuwenden für Maschenwaren, Webwaren, Vliesstoffe und Laminate. Es kann für textile Flächengebilde geeignet sein, die mit anderen Verfahren hergestellt sind. Die Prüfung ist sowohl für an das Normalklima angeglichene Messproben als auch für Messproben im nassen Zustand geeignet.
Wie aus den zur Verfügung stehenden Daten hervorgeht, scheint es bei mit hydraulischen und pneumatischen Berstdruckprüfgeräten gewonnenen Ergebnissen von Drücken bis zu 800 kPa keinen signifikanten Unterschied zu geben. Dieser Druckbereich umfasst die Mehrzahl der für Bekleidung zu erwartenden Kennwerte. Für spezielle Textilien, für die hohe Berstdrücke gefordert sind, ist das hydraulische Prüfgerät das geeignetere.

Textiles - Propriétés de résistance à l'éclatement des étoffes - Partie 1: Méthode hydraulique pour la détermination de la résistance et de la déformation à l'éclatement (ISO 13938-1:2019)

Le présent document décrit une méthode hydraulique de détermination de la résistance et de la déformation à l'éclatement des étoffes.
Dans le présent document, une pression hydraulique est appliquée au moyen d'un dispositif à vitesse constante de pompage.
NOTE L'ISO 13938-2 décrit une méthode utilisant une pression pneumatique.
La méthode s'applique aux étoffes tricotées, tissées, non tissées et laminées. Elle peut convenir aux étoffes produites par d'autres techniques. L'essai peut être effectué soit sur des éprouvettes conditionnées, soit sur des éprouvettes humides.
D'après les informations actuellement disponibles, il n'apparaît aucune différence significative, pour les pressions allant jusqu'à 800 kPa, entre les résultats obtenus avec des éclatomètres hydrauliques et ceux obtenus avec des appareillages pneumatiques. Cette gamme de pressions couvre la majorité des niveaux de performance prévus pour les étoffes courantes d'habillement. Pour les textiles spécifiques nécessitant des pressions d'éclatement élevées, l'appareillage hydraulique est plus approprié.

Tekstilije - Razpočne lastnosti ploskovnih tekstilij - 1. del: Hidravlična metoda za ugotavljanje razpočne trdnosti in višine izbočenja (ISO 13938-1:2019)

Ta standard opisuje hidravlično metodo za določanje razpočne trdnosti in višine izbočenja pri tekstilnih tkaninah. V tem dokumentu se hidravlični tlak uporablja s konstantno hitrostjo črpalne naprave. Metoda je uporabna za pletene, tkane, netkane in laminirane tkanine. Primerna je za tudi za tekstilije, ki so proizvedene z drugimi metodami. Preskus je primeren za preskusne vzorce v kondicioniranem ali mokrem stanju. Iz razpoložljivih podatkov je videti, da pri rezultatih razpočne trdnosti, doseženih s hidravličnimi ali pnevmatskimi preizkuševalci pri tlakih do 800 kPa, ni pomembne razlike. Ta razpon tlaka zajema večino lastnosti, pričakovanih pri običajnih oblačilih. Za posebne tekstilije, pri katerih je potreben visok razpočni tlak, je bolj primerna hidravlična naprava.

General Information

Status
Published
Public Enquiry End Date
29-Sep-2019
Publication Date
22-Dec-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Dec-2019
Due Date
22-Feb-2020
Completion Date
23-Dec-2019

RELATIONS

Buy Standard

Standard
SIST EN ISO 13938-1:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
oSIST prEN ISO 13938-1:2019
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 13938-1:2020
01-februar-2020
Nadomešča:
SIST EN ISO 13938-1:1999

Tekstilije - Razpočne lastnosti ploskovnih tekstilij - 1. del: Hidravlična metoda za

ugotavljanje razpočne trdnosti in višine izbočenja (ISO 13938-1:2019)

Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of

bursting strength and bursting distension (ISO 13938-1:2019)

Textilien - Bersteigenschaften von textilen Flächengebilden - Teil 1: Hydraulisches

Verfahren zur Bestimmung von Berstdruck und Berstwölbung (ISO 13938-1:2019)

Textiles - Propriétés de résistance à l'éclatement des étoffes - Partie 1: Méthode

hydraulique pour la détermination de la résistance et de la déformation à l'éclatement

(ISO 13938-1:2019)
Ta slovenski standard je istoveten z: EN ISO 13938-1:2019
ICS:
59.080.30 Tkanine Textile fabrics
SIST EN ISO 13938-1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13938-1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 13938-1:2020
EN ISO 13938-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 59.080.30 Supersedes EN ISO 13938-1:1999
English Version
Textiles - Bursting properties of fabrics - Part 1: Hydraulic
method for determination of bursting strength and
bursting distension (ISO 13938-1:2019)

Textiles - Propriétés de résistance à l'éclatement des Textilien - Bersteigenschaften von textilen

étoffes - Partie 1: Méthode hydraulique pour la Flächengebilden - Teil 1: Hydraulisches Verfahren zur

détermination de la résistance et de la déformation à Bestimmung von Berstdruck und Berstwölbung (ISO

l'éclatement (ISO 13938-1:2019) 13938-1:2019)
This European Standard was approved by CEN on 17 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13938-1:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13938-1:2020
EN ISO 13938-1:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 13938-1:2020
EN ISO 13938-1:2019 (E)
European foreword

This document (EN ISO 13938-1:2019) has been prepared by Technical Committee ISO/TC 38

"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the

secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be

withdrawn at the latest by June 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 13938-1:1999.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 13938-1:2019 has been approved by CEN as EN ISO 13938-1:2019 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 13938-1:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 13938-1:2020
INTERNATIONAL ISO
STANDARD 13938-1
Second edition
2019-11
Textiles — Bursting properties of
fabrics —
Part 1:
Hydraulic method for determination
of bursting strength and bursting
distension
Textiles — Propriétés de résistance à l'éclatement des étoffes —
Partie 1: Méthode hydraulique pour la détermination de la résistance
et de la déformation à l'éclatement
Reference number
ISO 13938-1:2019(E)
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 13938-1:2020
ISO 13938-1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 13938-1:2020
ISO 13938-1:2019(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 2

5 Sampling ........................................................................................................................................................................................................................ 2

6 Apparatus ..................................................................................................................................................................................................................... 2

7 Atmospheres for conditioning and testing ................................................................................................................................ 3

8 Procedure..................................................................................................................................................................................................................... 3

9 Calculation and expression of results ............................................................................................................................................. 4

10 Test report ................................................................................................................................................................................................................... 5

10.1 General ........................................................................................................................................................................................................... 5

10.2 Test results.................................................................................................................................................................................................. 5

Annex A (informative) Selection of testing areas .................................................................................................................................... 6

© ISO 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 13938-1:2020
ISO 13938-1:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 24,

Conditioning atmospheres and physical tests for textile fabrics.

This second edition cancels and replaces the first edition (ISO 13938-1:1999), of which it constitutes a

minor revision.
The changes compared to the previous edition are as follows:
— the normative references have been updated.
A list of all parts in the ISO 13938 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2019 – All rights reserved
---------------------- Pag
...

SLOVENSKI STANDARD
oSIST prEN ISO 13938-1:2019
01-september-2019

Tekstilije - Razpočne lastnosti ploskovnih tekstilij - 1. del: Ugotavljanje razpočne

trdnosti in višine izbočenja z metodo vodnega tlaka (ISO/FDIS 13938-1:2019)

Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of

bursting strength and bursting distension (ISO/FDIS 13938-1:2019)

Textilien - Bersteigenschaften von textilen Flächengebilden - Teil 1: Hydraulisches

Verfahren zur Bestimmung von Berstdruck und Berstwölbung (ISO/FDIS 13938-1:2019)

Textiles - Propriétés de résistance à l'éclatement des étoffes - Partie 1: Méthode

hydraulique pour la détermination de la résistance et de la déformation à l'éclatement

(ISO/FDIS 13938-1:2019)
Ta slovenski standard je istoveten z: prEN ISO 13938-1
ICS:
59.080.30 Tkanine Textile fabrics
oSIST prEN ISO 13938-1:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13938-1:2019
---------------------- Page: 2 ----------------------
oSIST prEN ISO 13938-1:2019
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 13938-1
ISO/TC 38/SC 24
Textiles — Bursting properties of
Secretariat: AFNOR
fabrics —
Voting begins on:
2019-07-24
Part 1:
Voting terminates on:
Hydraulic method for determination
2019-10-16
of bursting strength and bursting
distension
Textiles — Propriétés de résistance à l'éclatement des étoffes —
Partie 1: Méthode hydraulique pour la détermination de la résistance
et de la déformation à l'éclatement
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 13938-1:2019(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO 13938-1:2019
ISO/FDIS 13938-1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 13938-1:2019
ISO/FDIS 13938-1:2019(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 2

5 Sampling ........................................................................................................................................................................................................................ 2

6 Apparatus ..................................................................................................................................................................................................................... 2

6.1 Bursting tester ......................................................................................................................................................................................... 2

7 Atmospheres for conditioning and testing ................................................................................................................................ 3

8 Procedure..................................................................................................................................................................................................................... 3

9 Calculation and expression of results ............................................................................................................................................. 4

10 Test report ................................................................................................................................................................................................................... 5

10.1 General ........................................................................................................................................................................................................... 5

10.2 Test results.................................................................................................................................................................................................. 5

Annex A (informative) Selection of testing areas .................................................................................................................................... 6

© ISO 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 13938-1:2019
ISO/FDIS 13938-1:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso. org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso

.org/iso/foreword .html.

This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 24,

Conditioning atmospheres and physical tests for textile fabrics.

This second edition cancels and replaces the first edition (ISO 13938-1:1999), of which it constitutes a

minor revision.
The changes compared to the previous edition are as follows:
— the normative references have been updated.
A list of all parts in the ISO 13938 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/members. html.
iv © ISO 2019 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 13938-1:2019
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 13938-1:2019(E)
Textiles — Bursting properties of fabrics —
Part 1:
Hydraulic method for determination of bursting strength
and bursting distension
1 Scope

This document describes a hydraulic method for the determination of bursting strength and bursting

distension of textile fabrics.

In this document, a hydraulic pressure is applied using a constant rate of pumping device.

NOTE ISO 13938-2 describes a method using pneumatic pressure.

The method is applicable to knitted, woven, nonwoven and laminated fabrics. It can be suitable for fabrics

produced by other techniques. The test is suitable for test specimens in the conditioned or wet state.

From the available data, there appears to be no significant difference in the bursting strength results

achieved using hydraulic or pneumatic burst testers, for pressures up to 800 kPa. This pressure range

covers the majority of performance levels expected of general apparel. For speciality textiles requiring

high bursting pressures, the hydraulic apparatus is more suitable.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 139, Textiles — Standard atmospheres for conditioning and testing
ISO 3696, Water for analytical laboratory use — Specification and test methods
ISO 10012, Measurement management systems — Requirements for
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.