SIST EN 14903:2018
(Main)Surfaces for sports areas - Multi-sports floor systems for indoor use - Test method for determination of rotational friction
Surfaces for sports areas - Multi-sports floor systems for indoor use - Test method for determination of rotational friction
This European Standard specifies a method for the determination of the friction between any type of sports surface and a rotating foot with a vertical load. The method is applicable to tests carried out in the laboratory and on site.
Sportböden - Synthetische Sportböden für den Innenbereich - Bestimmung der Drehreibung
Diese Europäische Norm legt ein Verfahren für die Bestimmung der Reibung zwischen einem beliebigen Sportbodentyp und einem Drehfuß mit vertikaler Last fest. Das Verfahren kann sowohl im Labor als auch vor Ort angewendet werden.
Sols sportifs - Systèmes de sols multisports pour utilisation en intérieur - Méthode d’essai de détermination de la glissance en rotation
La présente Norme européenne spécifie une méthode de détermination du frottement entre n'importe quel type de sol sportif et un pied rotatif soumis à une charge verticale. Cette méthode peut être utilisée pour des essais réalisés en laboratoire ou sur site.
Podloge za športne dejavnosti - Sistemi večnamenskih podlog za notranjo uporabo - Preskusna metoda za ugotavljanje odpornosti proti trenju pri vrtenju
Ta evropski standard določa metodo za ugotavljanje trenja med poljubno športno površino in vrtečo se nogo pri vertikalni obremenitvi. Metoda se uporablja za preskušanja v laboratoriju ali na mestu uporabe.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WUDQMRSportböden - Synthetische Sportböden für den Innenbereich - Bestimmung der DrehreibungSols sportifs - Systèmes de sols multisports pour utilisation en intérieur - Méthode d’essai de détermination de la glissance en rotationSurfaces for sports areas - Multi-sports floor systems for indoor use - Test method for determination of rotational friction97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 14903:2018SIST EN 14903:2018en,fr,de01-september-2018SIST EN 14903:2018SLOVENSKI
STANDARD
SIST EN 14903:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14903
June
t r s z ICS
{ yä t t rä s r English Version
Surfaces for sports areas æ Multiæsports floor systems for indoor use æ Test method for determination of rotational friction Sols sportifs æ Systèmes de sols multisports pour utilisation en intérieur æ Méthode d 5essai de détermination de la glissance en rotation
Sportböden æ Synthetische Sportböden für den Innenbereich æ Bestimmung der Drehreibung This European Standard was approved by CEN on
s October
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v { r uã t r s z ESIST EN 14903:2018
EN 14903:2018 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Determination of rotational friction . 4 4.1 General principle . 4 4.2 Sampling . 5 4.2.1 Laboratory testing . 5 4.2.2 Testing on site . 5 4.3 Apparatus . 5 4.3.1 Test device . 5 4.3.2 Measuring and recording instruments . 8 4.4 Preparation of test pieces . 8 4.4.1 Laboratory testing . 8 4.4.2 Field testing . 8 4.5 Procedure. 9 4.6 Evaluation and expression of results . 9 4.7 Uncertainty . 11 5 Test report . 11 Annex A (informative)
Leather for the test foot . 12
SIST EN 14903:2018
EN 14903:2018 (E) 3 European foreword This document (EN 14903:2018) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2018, and conflicting national standards shall be withdrawn at the latest by December 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 14903:2018
EN 14903:2018 (E) 4 1 Scope This European Standard specifies a method for the determination of the friction between multi-sports floor systems excluding synthetic turf for indoor use and a rotating foot with a vertical load. The method is applicable to tests carried out in the laboratory and on site. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 660-1, Resilient floor coverings — Determination of wear resistance — Part 1: Stuttgart test EN 60051 (all parts), Direct acting indicating analogue electrical measuring instruments and their accessories (IEC 60051) EN ISO 291, Plastics - Standard atmospheres for conditioning and testing (ISO 291) ISO 21948, Coated abrasives — Plain sheets 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 friction coefficient horizontal force between the test foot and the sports surface (resulting from the measured torque) divided by the vertical load on the foot during rotation Note 1 to entry: See 4.6 to determine the coefficient of friction. 3.2 vertical load vertical force exerted on the sports floor by the test foot 3.3 torque result of forces occurring at the eccentrically positioned test soles when the test foot rotates onto the sports surface under vertical load Note 1 to entry:
The torque equals the force multiplied by the distance of the skids from the centre of the test foot. 4 Determination of rotational friction 4.1 General principle Friction is measured by allowing a circular test foot, with attached test soles, to rotate on the sports surface under a vertical load. The friction resistance is calculated by recording the torque when the rotating test foot touches the test surface and then slides in rotation until the foot comes to a complete stop. From this, the coefficient of friction, µ, is calculated. SIST EN 14903:2018
EN 14903:2018 (E) 5 4.2 Sampling 4.2.1 Laboratory testing The supplied test section
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.