Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)

This part of ISO 16119 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It also specifies the requirements for identification of the sprayer and certain of its components, and the minimum content of the instruction handbook. It is intended to be used with each of the other parts of ISO 16119, which give requirements specific to particular types of sprayers (see Annex A). This part of ISO 16119 is applicable to all types of sprayers used in agriculture, horticulture, forestry and other areas, except knapsack sprayers. It does not cover safety aspects (see ISO 4254-6). NOTE Knapsack sprayers are covered by ISO 19932, which deals with safety as well as environmental aspects. This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.

Land- und Forstmaschinen - Pflanzenschutzgeräte zum Ausbringen von Pflanzenschutzmitteln und flüssigen Düngemitteln - Umweltschutz - Teil 1: Allgemeines (ISO 16119-1:2013)

Diese Norm gilt für jegliche in der Land- und Forstwirtschaft, im Gartenbau und in anderen Bereichen verwendete Gerätetypen zum Ausbringen von Pestiziden und Flüssigdünger. Diese werden in der vorliegenden Norm als „Pflanzenschutzgeräte“ bezeichnet. Sie legt Anforderungen an die Konstruktion und Leistung dieser Geräte hinsichtlich der Reduzierung möglicher Gefährdungen für die Umwelt sowie deren Überprüfung fest. Sie enthält außerdem Anforderungen an die Kennzeichnung der Pflanzenschutzgeräte und legt den Mindestinhalt der Betriebsanleitung fest. Der vorliegende Teil der ISO 16119 beschreibt die zu erfüllenden allgemeinen Anforderungen. Die
besonderen Anforderungen an die verschiedenen Gerätetypen sind in den jeweiligen spezifischen Normteilen festgelegt. Der Anwendungsbereich für jeden spezifischen Teil ist im normativen Anhang A festgelegt. ANMERKUNG Die Übereinstimung mit ISO 16119 kann nur angegeben werden, wenn das Pflanzenschutzgerät die in
ISO/DIS 16119-1:2010 und die in einem der im normativen Anhang A angegebenen spezifischen Teile dieser Norm gestellten Anforderungen erfüllt.
Diese Norm behandelt keine sicherheitstechnischen Gesichtspunkte; diese werden in ISO 4254-6:2009 behandelt.

Matériel agricole et forestier - Exigences environnementales pour les pulvérisateurs - Partie 1: Généralités (ISO 16119-1:2013)

L'ISO 16119-1:2013 spécifie les exigences générales pour la conception et les performances des pulvérisateurs, tels que définis dans l'ISO 5681, avec l'objectif de réduire le risque potentiel de contamination de l'environnement lors de leur utilisation, y compris lors d'une mauvaise utilisation raisonnablement prévisible par le fabricant. En outre, elle définit les exigences pour l'identification du pulvérisateur ainsi que certains de ses composants et le contenu minimal de la notice d'instructions.
Elle est prévue pour être utilisée conjointement avec les autres parties de l'ISO 16119, qui donnent les exigences spécifiques pour les différents types de pulvérisateurs. L'ISO 16119-1:2013 est applicable à tous les types de pulvérisateurs  utilisés dans l'agriculture, l'horticulture, la sylviculture et d'autres domaines, à l'exception des pulvérisateurs à dos. Elle ne couvre pas les aspects de sécurité (voir l'ISO 4254‑6).
NOTE          Les pulvérisateurs à dos sont couverts par l'ISO 19932, qui traite des aspects relatifs à la sécurité et à l'environnement.
L'ISO 16119-1:2013 n'est pas applicable aux pulvérisateurs qui sont fabriqués avant sa date de publication.

Kmetijski in gozdarski stroji - Okoljevarstvene zahteve za škropilnice - 1. del: Splošno (ISO 16119-1:2013)

Ta del standarda ISO 16119 določa splošne zahteve za projektiranje in lastnosti škropilnic, kot je opredeljeno v standardu ISO 5681, pri čemer si je treba prizadevati za čim manjše tveganje okoljskega onesnaženja med uporabo, vključno s predvideno nepravilno uporabo. Določa tudi zahteve za identifikacijo škropilnice in nekaterih njenih sestavnih delov ter za minimalno potrebno vsebino za navodila za uporabo. Namenjen je uporabi s katerim koli drugim delom standarda ISO 16119, ki vsebuje zahteve za posebne vrste škropilnic (glej dodatek A). Ta del standarda ISO 16119 se uporablja za vse vrste škropilnic, ki se uporabljajo v kmetijstvu, vrtnarstvu, gozdarstvu in na drugih področjih, razen za nahrbtne škropilnice. Ne vključuje varnostnih vidikov (glej standard ISO 4254-6). OPOMBA Nahrbtne škropilnice so vključene v standard ISO 19932, ki obravnava varnostne in okoljevarstvene vidike. Ta del standarda ISO 16119 se ne uporablja za škropilnice, izdelane pred datumom njegove objave.

General Information

Status
Published
Public Enquiry End Date
24-Apr-2011
Publication Date
01-Apr-2013
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Mar-2013
Due Date
24-May-2013
Completion Date
02-Apr-2013

Relations

Buy Standard

Standard
EN ISO 16119-1:2013
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16119-1:2013
01-maj-2013
1DGRPHãþD
SIST EN 12761-1:2001
Kmetijski in gozdarski stroji - Okoljevarstvene zahteve za škropilnice - 1. del:
Splošno (ISO 16119-1:2013)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1:
General (ISO 16119-1:2013)
Land- und Forstmaschinen - Pflanzenschutzgeräte zum Ausbringen von
Pflanzenschutzmitteln und flüssigen Düngemitteln - Umweltschutz - Teil 1: Allgemeines
(ISO 16119-1:2013)
Matériel agricole et forestier - Exigences environnementales pour les pulvérisateurs -
Partie 1: Généralités (ISO 16119-1:2013)
Ta slovenski standard je istoveten z: EN ISO 16119-1:2013
ICS:
13.020.01 Okolje in varstvo okolja na Environment and
splošno environmental protection in
general
65.060.25 2SUHPD]DVNODGLãþHQMH Equipment for storage,
SULSUDYRLQUD]GHOMHYDQMH preparation and distribution
JQRMLY of fertilizers
SIST EN ISO 16119-1:2013 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16119-1:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 16119-1:2013


EUROPEAN STANDARD
EN ISO 16119-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2013
ICS 65.060.40 Supersedes EN 12761-1:2001
English Version
Agricultural and forestry machinery - Environmental
requirements for sprayers - Part 1: General (ISO 16119-1:2013)
Matériel agricole et forestier - Exigences Land- und Forstmaschinen - Pflanzenschutzgeräte zum
environnementales pour les pulvérisateurs - Partie 1: Ausbringen von Pflanzenschutzmitteln und flüssigen
Généralités (ISO 16119-1:2013) Düngemitteln - Umweltschutz - Teil 1: Allgemeines (ISO
16119-1:2013)
This European Standard was approved by CEN on 5 January 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16119-1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16119-1:2013
EN ISO 16119-1:2013 (E)
Contents Page
Foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 2009/127/EC amending 2006/42/EC. 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16119-1:2013
EN ISO 16119-1:2013 (E)
Foreword
This document (EN ISO 16119-1:2013) has been prepared by Technical Committee CEN/TC 144 “Tractors
and machinery for agriculture and forestry", the secretariat of which is held by AFNOR, in collaboration with
Technical Committee ISO/TC 23 "Tractors and machinery for agriculture and forestry".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2013, and conflicting national standards shall be
withdrawn at the latest by September 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12761-1:2001.
The following major changes were introduced:
 extension of the scope;
 updating of the normative references;
 revision of the definitions;
 addition of requirements on losses, indication of pesticide in use, filling, cleaning and servicing;
 modification and addition of new instructions;
addition of Annexes A and ZA.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 16119-1:2013
EN ISO 16119-1:2013 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of EC Directive 2009/127/EC amending 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2009/127/EC amending 2006/42/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
NOTE Unless used with a specific part of ISO 16119, this part of ISO 16119 does not give presumption of conformity.

4

---------------------- Page: 6 ----------------------

SIST EN ISO 16119-1:2013
INTERNATIONAL ISO
STANDARD 16119-1
First edition
2013-03-01
Agricultural and forestry
machinery — Environmental
requirements for sprayers —
Part 1:
General
Matériel agricole et forestier — Exigences environnementales pour les
pulvérisateurs —
Partie 1: Généralités
Reference number
ISO 16119-1:2013(E)
©
ISO 2013

---------------------- Page: 7 ----------------------

SIST EN ISO 16119-1:2013
ISO 16119-1:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 16119-1:2013
ISO 16119-1:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 1
4.1 General . 1
4.2 Inspections . 2
4.3 Adjustment of the volume application rate . 2
4.4 Distribution and deposition . 2
4.5 Losses . 2
4.6 Indication of pesticide in use . 2
4.7 Filling . 2
4.8 Emptying, cleaning and service . 3
5 Marking . 3
5.1 General . 3
5.2 Nozzles . 3
5.3 Filters . 3
6 Instruction handbook . 3
Annex A (informative) Parts of ISO 16119 dealing with specific sprayer types .5
Bibliography . 7
© ISO 2013 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 16119-1:2013
ISO 16119-1:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare Inter
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.