Heat meters - Part 1: General requirements

This European Standard specifies the general requirements and applies to heat meters. Heat meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The heat meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are not covered by this European Standard.
Surface mounted temperature sensors are not covered by this European Standard.
This standard covers meters for closed systems only, where the differential pressure over the thermal load is limited.

Wärmezähler - Teil 1: Allgemeine Anforderungen

Diese Europäische Norm legt die allgemeinen Anforderungen für Wärmezähler fest. Wärmezähler sind Geräte, die dazu dienen, die Energiemenge zu messen, die in einem Wärmetauscherkreis¬lauf durch eine als Wärmeträgerflüssigkeit bezeichnete Flüssigkeit aufgenommen (Kühlen) oder abgegeben (Heizen) wird. Der Wärmezähler zeigt die Wärmemenge in gesetzlichen Einheiten an.
Elektrische Sicherheitsanforderungen werden in dieser Europäischen Norm nicht behandelt.
Den Druck betreffende Sicherheitsanforderungen werden in dieser Europäischen Norm nicht behandelt.
Oberflächenmontierte Temperaturfühler werden in dieser Europäischen Norm nicht behandelt.
Die vorliegende Norm behandelt ausschließlich Zähler für geschlossene Systeme, in denen der Differenz-druck am Wärmeübertrager begrenzt ist.

Compteurs d'énergie thermique - Partie 1 : Prescriptions générales

La présente Norme européenne spécifie les prescriptions générales relatives aux compteurs d'énergie thermique. Les compteurs d'énergie thermique sont des instruments destinés à mesurer l'énergie thermique qui, dans un circuit d'échange thermique, est absorbée (refroidissement) ou cédée (chauffage) par un liquide appelé « liquide caloporteur ». Le compteur d'énergie thermique fournit la quantité d'énergie thermique en unités de mesure légales.
La présente Norme européenne ne traite pas des prescriptions de sécurité électrique.
La présente Norme européenne ne traite pas des prescriptions de sécurité relative à la pression.
La présente Norme européenne ne traite pas des sondes de température montées en surface.
La présente norme couvre les compteurs pour les systèmes fermés uniquement, où la pression différentielle dans la charge thermique est limitée.

Merilniki toplote - 1. del: Splošne zahteve - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
02-Jan-2018
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
10-Jan-2019
Due Date
15-Jan-2019
Completion Date
10-Jan-2019

Relations

Buy Standard

Draft
EN 1434-1:2016/oprA1:2017
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1434-1:2016/oprA1:2017
01-december-2017
Toplotni števci - 1. del: Splošne zahteve
Heat meters - Part 1: General requirements
Wärmezähler - Teil 1: Allgemeine Anforderungen
Compteurs d'énergie thermique - Partie 1 : Prescriptions générales
Ta slovenski standard je istoveten z: EN 1434-1:2015/prA1
ICS:
17.200.10 Toplota. Kalorimetrija Heat. Calorimetry
SIST EN 1434-1:2016/oprA1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1434-1:2016/oprA1:2017

---------------------- Page: 2 ----------------------

SIST EN 1434-1:2016/oprA1:2017


DRAFT
EUROPEAN STANDARD
EN 1434-1:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
October 2017
ICS 17.200.10
English Version

Thermal energy meters - Part 1: General requirements
Compteurs d'énergie thermique - Partie 1 : Wärmezähler - Teil 1: Allgemeine Anforderungen
Prescriptions générales
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 176.

This draft amendment A1, if approved, will modify the European Standard EN 1434-1:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1434-1:2015/prA1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1434-1:2016/oprA1:2017
EN 1434-1:2017/prA1:2017 (E)
Contents Page
European foreword . 3
1 Modification to the English title . 4
2 Modifications overall the document . 4
3 Modification to Clause 3, "Terms and definitions". 4
4 Modification to subclause 6.10, "Software" . 4
5 Modification to the "Bibliography" . 4
6 Modification to Annex ZA . 4
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2014/32/EU aimed to be covered . 5

2

---------------------- Page: 4 ----------------------

SIST EN 1434-1:2016/oprA1:2017
EN 1434-1:2017/prA1:2017 (E)
European foreword
This document (EN 1434-1:2017/prA1:2017) has been prepared by Technical Committee CEN/TC 176
“Thermal energy meters”, the secretariat of which is held by SIS.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this
document.
3

---------------------- Page: 5 ----------------------

SIST EN 1434-1:2016/oprA1:2017
EN 1434-1:2017/prA1:2017 (E)
1 Modification to the English title
Replace the the English title with the following:
“Thermal energy meters — Part 1: General requirements".
The German title "Wärmezähler — Teil 1: Allgemeine Anforderungen" and the French title "Compteurs
d’énergie thermique — Partie 1: Precriptions générales" remain unchanged.
2 Modifications overall the document
Overall the document, replace "heat meter" with "thermal energy meter”.
Overall the document, replace "heating/cooling meter" with "thermal energy meter".
Overall the document, replace the references "EN 1434-X:2015" with "EN 1434-X:2015+prA1:2017".
3 Modification to Clause 3, "Terms and definitions"
Replace "heat meter or cooling meter" with "thermal energy meter" to read:
"3.28
meter for smart metering
thermal energy meter with the capability of data communication and support of smart metering
functionalities
Note 1 to entry: Data could be transmitted via user interface and/ or communi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.