Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)

This document specifies a bending-vibration method based upon resonance curves for determining the
flexural complex modulus Ef
* of homogeneous plastics and the damping properties of laminated
plastics intended for acoustic insulation, for example systems consisting of a metal sheet coated with a
damping plastic layer, or sandwich systems consisting of two sheet-metal layers with an intermediate
plastic layer. For many purposes, it is useful to determine these properties as a function of temperature
and frequency.

Kunststoffe - Bestimmung dynamisch-mechanischer Eigenschaften - Teil 3: Biegeschwingung - Resonanzkurven-Verfahren (ISO 6721-3:2021)

Dieses Dokument legt ein Biegeschwingverfahren fest, bei dem mit Hilfe von Resonanzkurven der komplexe Biegemodul E*f von homogenen Kunststoffen und die Dämpfungseigenschaften von geschichteten Kunststoffen bestimmt werden, die für die Körperschall-Isolation vorgesehen sind. Dies sind beispielsweise Systeme aus Metall¬blech mit dämpfendem Kunststoffbelag oder Verbundsysteme, die aus zwei Metallblechen mit einer Kunststoffzwischenschicht bestehen. Für viele Zwecke ist es vorteilhaft, diese Eigenschaften als Funktion von Temperatur und Frequenz zu bestimmen.

Plastiques - Détermination des propriétés mécaniques dynamiques - Partie 3: Vibration en flexion - Méthode en résonance (ISO 6721-3:2021)

Le présent document spécifie une méthode de vibration en flexion basée sur les courbes de résonance pour la détermination du module complexe en flexion E*f de plastiques homogènes et des propriétés d’amortissement de plastiques stratifiés spécialement destinés à l’isolation acoustique, par exemple des systèmes consistant en une feuille métallique revêtue d’une couche de plastique amortissant ou des systèmes en sandwichs consistant en deux feuilles métalliques avec une couche intermédiaire en plastique. Pour beaucoup d’usages, il est utile de déterminer ces propriétés en fonction de la température et de la fréquence.

Polimerni materiali - Določevanje dinamičnih mehanskih lastnosti - 3. del: Upogibne vibracije - Metoda resonančne krivulje (ISO 6721-3:2021)

General Information

Status
Published
Public Enquiry End Date
30-Apr-2020
Publication Date
24-Mar-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Mar-2021
Due Date
16-May-2021
Completion Date
25-Mar-2021

Relations

Buy Standard

Standard
EN ISO 6721-3:2021
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 6721-3:2020
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6721-3:2021
01-maj-2021
Nadomešča:
SIST EN ISO 6721-3:1999
Polimerni materiali - Določevanje dinamičnih mehanskih lastnosti - 3. del:
Upogibne vibracije - Metoda resonančne krivulje (ISO 6721-3:2021)
Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration -
Resonance-curve method (ISO 6721-3:2021)
Kunststoffe - Bestimmung dynamisch-mechanischer Eigenschaften - Teil 3:
Biegeschwingung - Resonanzkurven-Verfahren (ISO 6721-3:2021)
Plastiques - Détermination des propriétés mécaniques dynamiques - Partie 3: Vibration
en flexion - Méthode en résonance (ISO 6721-3:2021)
Ta slovenski standard je istoveten z: EN ISO 6721-3:2021
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 6721-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 6721-3:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 6721-3:2021


EN ISO 6721-3
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2021
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 6721-3:1996
English Version

Plastics - Determination of dynamic mechanical properties
- Part 3: Flexural vibration - Resonance-curve method (ISO
6721-3:2021)
Plastiques - Détermination des propriétés mécaniques Kunststoffe - Bestimmung dynamisch-mechanischer
dynamiques - Partie 3: Vibration en flexion - Méthode Eigenschaften - Teil 3: Biegeschwingung -
en résonance (ISO 6721-3:2021) Resonanzkurven-Verfahren (ISO 6721-3:2021)
This European Standard was approved by CEN on 14 February 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6721-3:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 6721-3:2021
EN ISO 6721-3:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 6721-3:2021
EN ISO 6721-3:2021 (E)
European foreword
This document (EN ISO 6721-3:2021) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2021, and conflicting national standards
shall be withdrawn at the latest by September 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6721-3:1996.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 6721-3:2021 has been approved by CEN as EN ISO 6721-3:2021 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 6721-3:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 6721-3:2021
INTERNATIONAL ISO
STANDARD 6721-3
Second edition
2021-02
Plastics — Determination of dynamic
mechanical properties —
Part 3:
Flexural vibration — Resonance-
curve method
Plastiques — Détermination des propriétés mécaniques
dynamiques —
Partie 3: Vibration en flexion — Méthode en résonance
Reference number
ISO 6721-3:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 6721-3:2021
ISO 6721-3:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 6721-3:2021
ISO 6721-3:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative reference . 1
3 Terms and definitions . 1
4 Principle . 1
5 Test apparatus . 2
5.1 General . 2
5.2 Clamps or suspension fibres . 2
5.3 Exciter and detector . 2
5.4 Temperature-controlled enclosure . 3
5.5 Gas supply . 3
5.6 Temperature-measurement device . 3
5.7 Devices for measuring test specimen dimensions . 4
6 Test specimens. 4
6.1 General . 4
6.2 Shape and dimensions . 5
6.3 Preparation . 5
7 Number of test specimens . 5
8 Conditioning . 5
9 Procedure. 5
9.1 Test atmosphere . 5
9.2 Measurement of specimen cross-section . 5
9.3 Measurement of specimen density . 5
9.4 Mounting the test specimens and adjustment of the transducers . 6
9.4.1 Method A . 6
9.4.2 Method B . 6
9.4.3 Adjustment of the transducers . 6
9.5 Varying the temperature . 6
9.6 Varying the frequency . 6
9.7 Recording the resonance curve . 6
10 Expression of results . 7
10.1 Symbols . 7
10.2 Calculation of flexural storage modulus, E' .
f 7
10.3 Calculation of flexural loss factor, tan δ .
f 8
10.4 Calculation of flexural loss modulus, E” .
f 8
10.5 Plotting the complex modulus as a function of temperature . 8
11 Precision . 8
11.1 Storage modulus . 8
11.2 Loss factor . 8
11.3 Precision of the methods . 9
12 Test report . 9
Annex A (informative) Interlaboratory testing .10
Bibliography .13
© ISO 2021 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 6721-3:2021
ISO 6721-3:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 5, Physical-
chemical properties, in collaboration with the European Committee for Standardization (CEN) Technical
Committee CEN/TC 249, Plastics, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 6721-3:1994), which has been technically
revised. It also incorporates the Technical Corrigendum ISO 6721-3:1994/Cor 1:1995.
The main changes compared to the previous edition are as follows:
— the document has been revised editorially;
— the normative references have been updated;
— the NOTE in Clause 3 has been moved to Clause 4;
— the method of specimen density measurement has been defined.
A list of all parts in the ISO 6721 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 6721-3:2021
INTERNATIONAL STANDARD ISO 6721-3:2021(E)
Plastics — Determination of dynamic mechanical
properties —
Part 3:
Flexural vibration — Resonance-curve method
1 Scope
This document specifies a bending-vibration method based upon resonance curves for determining the
*
flexural complex modulus E of homogeneous plastics and the damping properties of laminated
f
plastics intended for acoustic insulation, for example systems consisting of a metal sheet coated with a
damping plastic layer, or sandwich systems consisting of two sheet-metal layers with an intermediate
plastic layer. For many purposes, it is useful to determine these properties as a function of temperature
and frequency.
2 Normative reference
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applie
...

SLOVENSKI STANDARD
oSIST prEN ISO 6721-3:2020
01-april-2020
Polimerni materiali - Določevanje dinamičnih mehanskih lastnosti - 3. del:
Upogibne vibracije - Metoda resonančne krivulje (ISO/DIS 6721-3:2020)
Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration -
Resonance-curve method (ISO/DIS 6721-3:2020)
Kunststoffe - Bestimmung dynamisch-mechanischer Eigenschaften - Teil 3:
Biegeschwingung - Resonanzkurven-Verfahren (ISO/DIS 6721-3:2020)
Plastiques - Détermination des propriétés mécaniques dynamiques - Partie 3: Vibration
en flexion - Méthode en résonance (ISO/DIS 6721-3:2020)
Ta slovenski standard je istoveten z: prEN ISO 6721-3
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 6721-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 6721-3:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 6721-3:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 6721-3
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-02-24 2020-05-18
Plastics — Determination of dynamic mechanical
properties —
Part 3:
Flexural vibration — Resonance-curve method
Plastiques — Détermination des propriétés mécaniques dynamiques —
Partie 3: Vibration en flexion — Méthode en résonance
ICS: 83.080.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 6721-3:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 6721-3:2020
ISO/DIS 6721-3:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 6721-3:2020
ISO/DIS 6721-3:2020(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative reference . 1
3 Terms and definitions . 1
4 Principle . 1
5 Test apparatus . 2
5.1 General . 2
5.2 Clamps or suspension fibres . 2
5.3 Exciter and detector . 2
5.4 Temperature-controlled enclosure . 3
5.5 Gas supply . 3
5.6 Temperature-measurement device . 3
5.7 Devices for measuring test specimen dimensions . 3
6 Test specimens. 4
6.1 General . 4
6.2 Shape and dimensions . 4
6.3 Preparation . 4
7 Number . 5
8 Conditioning . 5
9 Procedure. 5
9.1 Test atmosphere . 5
9.2 Measurement of specimen cross-section . 5
9.3 Measurement of specimen density . 5
9.4 Mounting the test specimens and adjustment of the transducers . 5
9.4.1 Method A . 5
9.4.2 Method B . 5
9.4.3 Adjustment of the transducers . 6
9.5 Varying the temperature . 6
9.6 Varying the frequency . 6
9.7 Recording the resonance curve . 6
10 Expression of results . 6
10.1 Symbols . 6
10.2 Calculation of flexural storage modulus E' .
f 7
10.3 Calculation of flexural loss factor tan δ .
1 7
10.4 Calculation of flexural loss modulus E” .
f 8
10.5 Plotting the complex modulus as a function of temperature . 8
11 Precision . 8
11.1 Storage modulus . 8
11.2 Loss factor . 8
11.3 Precision of the methods . 8
12 Test report . 9
Annex A (informative) Round-robin testing .10
Bibliography .13
© ISO 2020 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 6721-3:2020
ISO/DIS 6721-3:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 5, Physical-
chemical properties.
This second edition cancels and replaces the first edition (ISO 6721-3:1994 and Technical corrigendum 1
from 1995), which has been technically revised.
The main changes compared to the previous edition are as follows:
— the document has been revised editorially;
— the normative reference has been changed to undated;
— the method of specimen density measurement has been defined.
A list of all parts in the ISO 6721 series can be found on the ISO website.
iv © ISO 2020 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 6721-3:2020
DRAFT INTERNATIONAL STANDARD ISO/DIS 6721-3:2020(E)
Plastics — Determination of dynamic mechanical
properties —
Part 3:
Flexural vibration — Resonance-curve method
1 Scope
This document specifies a bending-vibration method based upon resonance curves for determining the
*
flexural complex modulus E of homogeneous plastics and the damping properties of laminated
f
plastics intended for acoustic insulation, for example systems consisting of a metal sheet coated with a
damping plastic layer, or sandwich systems consisting of two sheet-metal layers with an intermediate
plastic layer. For many purposes, it is useful to determine these properties as a function of temperature
and frequency.
2 Normative reference
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion
method, liquid pycnometer method and titration method
ISO 1183-2, Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density
gradient column method
ISO 1183-3, Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas
pyknometer method
ISO 6721-1:2019, Plastics — Determination of dynamic mechanical properties — Part 1: General principles
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6721-1 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at https:// www .iso .org/ obp
4 Principle
A specimen is submitted to forced bending vibrations in the frequency range between about 10 Hz and
1 000 Hz. The resonance curve (see ISO 6721-1:2019, 3.11) is determined and, from the curve obtained,
the flexural storage modulus E′ (see ISO 6721-1:2019, 3.2) is calculated in the range above 0,5 MPa and
f
the loss factor given by tan δ = E″ /E′ (see ISO 6721-1:2019, 3.6) is calculated in the range between about
t f
−2 −1
10 and 10 (see NOTE). The test frequency can be varied by making measurements at more than one
vibrational order. The measurement range for the flexural loss modulus E″ (see ISO 6721-1:2019, 3.3) is
f
determined by that of the loss factor and by the value of the storage modulus.
© ISO 2020 – All rights reserved 1

---------------------- Page: 7 ----------------------
oSIST prEN ISO 6721-3:2020
ISO/DIS 6721-3:2020(E)

The mode of oscillation used is designated oscillation mode III (see ISO 6721-1:2019, Table 2) and the
type of modulus measured is designated E (see ISO 6721-1:2019, Table 3).
f
The test is performed on rect
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.