Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019)

This document specifies two methods for the determination of the acid value of a flux of types 1 and 2
only, as defined in ISO 9454-1.
Method A is a potentiometric titration method and is to be considered as the reference method.
Method B is an alternative, visual end‑point, titration method.

Flussmittel zum Weichlöten - Prüfverfahren - Teil 3: Bestimmung des Säurewertes, potentiometrische und visuelle Titrationsmethoden (ISO 9455-3:2019)

Dieses Dokument legt zwei Verfahren zur Bestimmung des Säurewertes eines Flussmittels der Typen 1 und 2 nach ISO 9454 1 fest.
Verfahren A ist eine potentiometrische Titration und ist als Referenzverfahren zu betrachten.
Verfahren B ist ein alternatives Titrationsverfahren mit visueller Endpunktbestimmung.

Flux de brasage tendre - Méthodes d'essai - Partie 3: Détermination de l'indice d'acide par des méthodes de titrage potentiométrique et visuel (ISO 9455-3:2019)

Le présent document spécifié deux méthodes de détermination de l'indice d'acide des flux de type 1 ou 2 uniquement tels que définis dans l'ISO 9454‑1.
La méthode A est une méthode de titrage potentiométrique. Elle est considérée comme la méthode de référence.
La méthode B est une variante de méthode de titrage à repérage visuel de la fin de la réaction.

Talila za mehko spajkanje - Preskusne metode - 3. del: Določevanje kislinskega števila s potenciometrično in vizualno titracijo (ISO 9455-3:2019)

General Information

Status
Published
Public Enquiry End Date
04-May-2019
Publication Date
29-Jul-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Jun-2020
Due Date
23-Aug-2020
Completion Date
30-Jul-2020

Relations

Buy Standard

Standard
EN ISO 9455-3:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 9455-3:2019
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9455-3:2020
01-september-2020
Nadomešča:
SIST EN ISO 9455-3:2001
Talila za mehko spajkanje - Preskusne metode - 3. del: Določevanje kislinskega
števila s potenciometrično in vizualno titracijo (ISO 9455-3:2019)
Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric
and visual titration methods (ISO 9455-3:2019)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 3: Bestimmung des Säurewertes,
potentiometrische und visuelle Titrationsmethoden (ISO 9455-3:2019)
Flux de brasage tendre - Méthodes d'essai - Partie 3: Détermination de l'indice d'acide
par des méthodes de titrage potentiométrique et visuel (ISO 9455-3:2019)
Ta slovenski standard je istoveten z: EN ISO 9455-3:2020
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9455-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 9455-3:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 9455-3:2020


EN ISO 9455-3
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2020
EUROPÄISCHE NORM
ICS 25.160.50 Supersedes EN ISO 9455-3:1994
English Version

Soft soldering fluxes - Test methods - Part 3:
Determination of acid value, potentiometric and visual
titration methods (ISO 9455-3:2019)
Flux de brasage tendre - Méthodes d'essai - Partie 3: Flussmittel zum Weichlöten - Prüfverfahren - Teil 3:
Détermination de l'indice d'acide par des méthodes de Bestimmung des Säurewertes, potentiometrische und
titrage potentiométrique et visuel (ISO 9455-3:2019) visuelle Titrationsmethoden (ISO 9455-3:2019)
This European Standard was approved by CEN on 10 April 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-3:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 9455-3:2020
EN ISO 9455-3:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 9455-3:2020
EN ISO 9455-3:2020 (E)
European foreword
This document (EN ISO 9455-3:2020) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2020, and conflicting national standards
shall be withdrawn at the latest by November 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9455-3:1994.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 9455-3:2019 has been approved by CEN as EN ISO 9455-3:2020 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 9455-3:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 9455-3:2020
INTERNATIONAL ISO
STANDARD 9455-3
Second edition
2019-09
Soft soldering fluxes — Test
methods —
Part 3:
Determination of acid value,
potentiometric and visual titration
methods
Flux de brasage tendre — Méthodes d'essai —
Partie 3: Détermination de l'indice d'acide par des méthodes de
titrage potentiométrique et visuel
Reference number
ISO 9455-3:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 9455-3:2020
ISO 9455-3:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 9455-3:2020
ISO 9455-3:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Method A: Potentiometric titration method . 1
4.1 Principle . 1
4.2 Reagents. 1
4.3 Apparatus . 2
4.4 Procedure . 2
4.4.1 General. 2
4.4.2 Manual procedure . 2
4.4.3 Automated procedure. 3
4.5 Calculation of results . 3
5 Method B — Titration method with visual end‑point . 3
5.1 Principle . 3
5.2 Reagents. 4
5.3 Apparatus . 4
5.4 Procedure . 4
5.5 Calculation of results . 5
6 Precision . 5
6.1 Method A . 5
6.2 Method B . 5
7 Test report . 5
Bibliography . 6
© ISO 2019 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 9455-3:2020
ISO 9455-3:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trad
...

SLOVENSKI STANDARD
oSIST prEN ISO 9455-3:2019
01-april-2019
7DOLOD]DPHKNRVSDMNDQMH3UHVNXVQHPHWRGHGHO'RORþHYDQMHNLVOLQVNHJD
ãWHYLODVSRWHQFLRPHWULþQRLQYL]XDOQRWLWUDFLMR ,62',6
Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric
and visual titration methods (ISO/DIS 9455-3:2019)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 3: Bestimmung des Säurewertes,
potentiometrische und visuelle Titrationsmethoden (ISO/DIS 9455-3:2019)
Flux de brasage tendre - Méthodes d'essai - Partie 3: Détermination de l'indice d'acide
par des méthodes de titrage potentiométrique et visuel (ISO/DIS 9455-3:2019)
Ta slovenski standard je istoveten z: prEN ISO 9455-3
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
oSIST prEN ISO 9455-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 9455-3:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 9455-3:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 9455-3
ISO/TC 44/SC 12 Secretariat: DIN
Voting begins on: Voting terminates on:
2019-02-08 2019-05-03
Soft soldering fluxes — Test methods —
Part 3:
Determination of acid value, potentiometric and visual
titration methods
Flux de brasage tendre — Méthodes d'essai —
Partie 3: Détermination de l'indice d'acide par des méthodes de titrage potentiométrique et visuel
ICS: 25.160.50
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 9455-3:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 9455-3:2019
ISO/DIS 9455-3:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 9455-3:2019
ISO/DIS 9455-3:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Method A: Potentiometric titration method . 1
3.1 Principle . 1
3.2 Reagents. 1
3.3 Apparatus . 2
3.4 Procedure . 2
3.4.1 Manual procedure . 2
3.4.2 Automated procedure. 3
3.5 Calculation of results . 3
4 Method B: Titration method with visual end‑point . 3
4.1 Principle . 3
4.2 Reagents. 4
4.3 Apparatus . 4
4.4 Procedure . 4
4.5 Calculation of results . 5
5 Precision . 5
5.1 Method A . 5
5.2 Method B . 5
6 Test report . 6
© ISO 2019 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 9455-3:2019
ISO/DIS 9455-3:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 12, Soldering materials.
This second edition cancels and replaces the first edition (ISO 9455-3:1992), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— Automated titration procedure has been added to Clause 3.4.
ISO 9455 consists of the following parts.
— Part 1: Determination of non‑volatile matter, gravimetric method
— Part 2: Determination of non‑volatile matter, ebulliometric method
— Part 3: Determination of acid value. potentiometric and visual titration methods
— Part 5: Copper mirror test
— Part 6: Determination of halide (excluding fluoride) content
— Part 8: Determination of zinc content
— Part 9: Determination of ammonia content
— Part 10: Flux efficacy tests, solder spread method
— Part 11: Solubility of flux residues
— Part 13: Determination of flux spattering
— Part 14: Assessment of tackiness of flux residues
iv © ISO 2019 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 9455-3:2019
ISO/DIS 9455-3:2019(E)

— Part 15: Copper corrosion test
— Part 16: Flux efficacy tests, wetting balance method
— Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues
© ISO 2019 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 9455-3:2019

---------------------- Page: 8 ----------------------
oSIST prEN ISO 9455-3:2019
DRAFT INTERNATIONAL STANDARD ISO/DIS 9455-3:2019(E)
Soft soldering fluxes — Test methods —
Part 3:
Determination of acid value, potentiometric and visual
titration methods
1 Scope
This part of IS0 9455 specifies two methods for the determination of the acid value of a flux of types 1
and 2 only, as defined in IS0 9454-1.
Method A is a potentiometric titration method and is to be considered as the reference method.
Method B is an alternative, visual end-point, titration method.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.