SIST EN ISO 17836:2018
(Main)Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
This document specifies a test procedure to determine the deposition efficiency for thermal spraying.
It provides a reliable comparison method between different spray processes and different feed stock.
It is applicable for all thermal spray processes (see ISO 14917) and all wire, rod, cord and powder spray
materials.
It is applicable when data concerning the deposition efficiency of a spray process in connection with a
defined spray material are required.
Thermisches Spritzen - Bestimmung der Auftragrate beim thermischen Spritzen (ISO 17836:2017)
Dieses Dokument legt ein Verfahren der Prüfungsdurchführung zur Bestimmung der Auftragrate für thermische Spritzverfahren fest. Es liefert ein zuverlässiges Verfahren für Vergleiche zwischen unterschiedlichen Spritzverfahren und unterschiedlichen zu fördernden Werkstoffen.
Es ist anwendbar für alle thermischen Spritzver¬fahren (siehe ISO 14917) und alle draht , stab , schnur und pulverförmigen Spritzzusätze.
Es ist anwendbar, wenn Angaben über die Auftragrate eines Spritzverfahrens in Verbindung mit einem bestimmten Spritzzusatz erforderlich sind.
Projection thermique - Détermination du rendement de dépôt en projection thermique (ISO 17836:2017)
L'ISO 17836 :2017 spécifie un mode opératoire de mise en ?uvre des essais destinés à déterminer le rendement de dépôt en projection thermique. Il fournit une méthode de comparaison fiable entre différents procédés de projection et différentes matières premières.
Il est applicable à tous les procédés de projection thermique (voir l'ISO 14917) et à tous les matériaux d'apport tels que fils, baguettes, cordons et poudres.
Il est applicable lorsque les données concernant le rendement de dépôt d'un procédé de projection associé à un matériau d'apport bien défini sont requises.
Vroče brizganje - Ugotavljanje učinkovitosti nanosa za vroče brizganje (ISO 17836:2017)
Ta dokument določa preskusno metodo za ugotavljanje učinkovitosti nanašanja za vroče brizganje. Določa zanesljivo primerjalno metodo med različnimi postopki brizganja in različnimi materiali za nanos. Uporablja se za vse postopke vročega brizganja (glej standard ISO 14917) ter za vse materiale za brizganje v obliki žic, palic, trakov in
materiale za razprševanju prahu.
Uporablja se za pridobivanje podatkov glede učinkovitosti nanosa pri postopku brizganja glede na izbrani material za brizganje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17836:2018
01-februar-2018
1DGRPHãþD
SIST EN ISO 17836:2005
9URþHEUL]JDQMH8JRWDYOMDQMHXþLQNRYLWRVWLQDQRVD]DYURþHEUL]JDQMH ,62
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO
17836:2017)
Thermisches Spritzen - Bestimmung der Auftragrate beim thermischen Spritzen (ISO
17836:2017)
Projection thermique - Détermination du rendement de dépôt en projection thermique
(ISO 17836:2017)
Ta slovenski standard je istoveten z: EN ISO 17836:2017
ICS:
25.220.20 Površinska obdelava Surface treatment
SIST EN ISO 17836:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17836:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 17836:2018
EN ISO 17836
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 25.220.20 Supersedes EN ISO 17836:2004
English Version
Thermal spraying - Determination of the deposition
efficiency for thermal spraying (ISO 17836:2017)
Projection thermique - Détermination du rendement Thermisches Spritzen - Bestimmung der Auftragrate
de dépôt en projection thermique (ISO 17836:2017) beim thermischen Spritzen (ISO 17836:2017)
This European Standard was approved by CEN on 4 November 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17836:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17836:2018
EN ISO 17836:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17836:2018
EN ISO 17836:2017 (E)
European foreword
This document (EN ISO 17836:2017) has been prepared by Technical Committee ISO/TC 107 “Metallic
and other inorganic coatings” in collaboration with Technical Committee CEN/TC 240 “Thermal
spraying and thermally sprayed coatings” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 17836:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17836:2017 has been approved by CEN as EN ISO 17836:2017 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17836:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 17836:2018
INTERNATIONAL ISO
STANDARD 17836
Second edition
2017-10
Thermal spraying — Determination of
the deposition efficiency for thermal
spraying
Projection thermique — Détermination du rendement de dépôt en
projection thermique
Reference number
ISO 17836:2017(E)
©
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 17836:2018
ISO 17836:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 17836:2018
ISO 17836:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test pieces, equipment, working and auxiliary materials . 2
5 Test procedure . 2
6 Determination of deposition efficiency . 3
7 Test report . 3
8 Designation . 4
Annex A (normative) Test piece — Pipe (A) . 5
Annex B (normative) Test piece — Plate (B) . 6
Annex C (informative) Record for the determination of the deposition efficiency rate — Example .7
Bibliography . 8
© ISO 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 17836:2018
ISO 17836:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.