Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing

This part of IEC 62660 specifies test procedures to observe the reliability and abuse
behaviour of secondary lithium-ion cells and cell blocks used for propulsion of electric
vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV).
NOTE 1 Secondary lithium-ion cells used for propulsion of plug-in hybrid electric vehicles (PHEV) can be tested
by the procedure either for BEV application or HEV application, according to the battery system design, based on
the agreement between the cell manufacturer and the customer.
This document specifies the standard test procedures and conditions for basic characteristics
of lithium-ion cells for use in propulsion of battery and hybrid electric vehicles. The tests are
indispensable for obtaining essential data on reliability and abuse behaviour of lithium-ion
cells for use in various designs of battery systems and battery packs.
This document provides standard classification of description of test results to be used for the
design of battery systems or battery packs.
NOTE 2 Cell blocks can be used as an alternative to cells according to the agreement between the cell
manufacturer and the customer.
NOTE 3 The safety requirements of lithium-ion cells for electric vehicle application are defined in IEC 62660-3 [3].

Lithium-Ionen-Sekundärzellen für den Antrieb von Elektrostraßenfahrzeugen - Teil 2: Zuverlässigkeits- und Missbrauchsprüfung

Eléments d'accumulateurs lithium-ion pour la propulsion des véhicules routiers électriques - Partie 2: Essais de fiabilité et de traitement abusif

La présente partie de l’IEC 62660 spécifie les procédures d'essai destinées à observer la fiabilité et le comportement sous traitement abusif des éléments et des blocs d’éléments d’accumulateurs lithium-ion utilisés pour la propulsion des véhicules électriques, y compris les véhicules électriques à batterie (BEV) et les véhicules électriques hybrides (HEV).
NOTE 1 Les éléments d’accumulateurs lithium-ion pour la propulsion des véhicules électriques hybrides rechargeables (PHEV) peuvent être soumis à l’essai avec la procédure pour application BEV ou pour application HEV, selon la conception des systèmes de batteries, sur la base de l’accord entre le fabricant de l’élément et le client.
Le présent document spécifie les procédures et les conditions d'essai normalisées pour des caractéristiques fondamentales des éléments lithium-ion utilisés pour la propulsion des véhicules électriques à batterie d’accumulateurs et hybrides. Les essais sont indispensables pour obtenir des données importantes sur la fiabilité et sur le comportement sous traitement abusif des éléments lithium-ion utilisés dans différentes conceptions de systèmes de batteries et de packs de batteries.
Le présent document donne une classification normalisée de la description des résultats d'essai à utiliser pour la conception des systèmes de batteries et des packs de batteries.
NOTE 2 Des blocs d’éléments peuvent être utilisés à la place d’éléments conformément à l’accord entre le fabricant de l’élément et le client.
NOTE 3 Les exigences de sécurité des éléments lithium-ion pour application aux véhicules électriques sont définies dans l’IEC 62660-3 [3].

Sekundarni litij-ionski členi za pogon električnih cestnih vozil - 2. del: Preskušanje zanesljivosti in izrabljivosti

Ta del standarda IEC 62660 določa preskusne postopke za preskušanje zanesljivosti in izrabljivosti sekundarnih litij-ionskih členov in blokov členov, ki se uporabljajo za pogon električnih vozil, vključno z električnimi akumulatorskimi vozili (BEV) in hibridnimi električnimi vozili (HEV).
OPOMBA 1: Sekundarne litij-ionske člene za pogon priključnega hibridnega električnega vozila (PHEV) je mogoče preskusiti s postopkom uporabe električnih akumulatorskih vozil ali hibridnih električnih vozil v skladu z zasnovo baterijskega sistema na podlagi dogovora med proizvajalcem členov in kupcem.
Ta dokument določa standardne preskusne postopke in pogoje za osnovne lastnosti litij-ionskih členov za uporabo pri pogonu akumulatorskih in hibridnih električnih vozil. Preskusi so nepogrešljivi za pridobivanje osnovnih podatkov o zanesljivosti in izrabljivosti litij-ionskih členov za uporabo v različnih izvedbah baterijskih sistemov in akumulatorjev.
Ta dokument podaja standardno klasifikacijo opisa rezultatov preskušanj, ki se uporablja za načrtovanje baterijskih sistemov in akumulatorjev.
OPOMBA 2: Kot alternativa členom se lahko v skladu z dogovorom med proizvajalcem in kupcem uporabijo bloki členov.
OPOMBA 3: Varnostne zahteve za litij-ionske akumulatorje in sisteme za električna vozila so določene v standardu IEC 62660-3 [3].

General Information

Status
Published
Publication Date
09-Apr-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
28-Mar-2019
Due Date
02-Jun-2019
Completion Date
10-Apr-2019

Relations

Buy Standard

Standard
EN IEC 62660-2:2019 - BARVE
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 62660-2:2019 - BARVE na PDF-str 17
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62660-2:2019
01-maj-2019
Nadomešča:
SIST EN 62660-2:2011
Sekundarni litij-ionski členi za pogon električnih cestnih vozil - 2. del: Preskušanje
zanesljivosti in izrabljivosti
Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability
and abuse testing
Lithium-Ionen-Sekundärzellen für den Antrieb von Elektrostraßenfahrzeugen - Teil 2:
Zuverlässigkeits- und Missbrauchsprüfung
Eléments d'accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques - Partie 2: Essais de fiabilité et de traitement abusif
Ta slovenski standard je istoveten z: EN IEC 62660-2:2019
ICS:
29.220.20 Kislinski sekundarni členi in Acid secondary cells and
baterije batteries
43.120 Električna cestna vozila Electric road vehicles
SIST EN IEC 62660-2:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62660-2:2019

---------------------- Page: 2 ----------------------
SIST EN IEC 62660-2:2019


EUROPEAN STANDARD EN IEC 62660-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2019
ICS 29.220.20; 43.120 Supersedes EN 62660-2:2011
English Version
Secondary lithium-ion cells for the propulsion of electric road
vehicles - Part 2: Reliability and abuse testing
(IEC 62660-2:2018)
Éléments d'accumulateurs lithium-ion pour la propulsion Sekundärbatterien für den Antrieb von
des véhicules routiers électriques - Partie 2: Essais de Elektrostraßenfahrzeugen - Teil 2: Zuverlässigkeits- und
fiabilité et de traitement abusif Missbrauchsprüfung von Lithium-Ionen-Zellen
(IEC 62660-2:2018) (IEC 62660-2:2018)
This European Standard was approved by CENELEC on 2019-01-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62660-2:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62660-2:2019
EN IEC 62660-2:2019 (E)
European foreword
The text of document 21/976/FDIS, future edition 2 of IEC 62660-2, prepared by IEC/TC 21
"Secondary cells and batteries" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62660-2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-10-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-01-16
document have to be withdrawn

This document supersedes EN 62660-2:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62660-2:2018 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62660-1 NOTE Harmonized as EN 62660-1
NOTE Harmonized as EN 62660-3
IEC 62660-3
IEC 61434:1996 NOTE Harmonized as EN 61434:1996 (not modified)

2

---------------------- Page: 4 ----------------------
SIST EN IEC 62660-2:2019
EN IEC 62660-2:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60068-2-64 -  Environmental testing - Part 2-64: Tests - Test Fh: EN 60068-2-64 -
Vibration, broadband random and guidance
ISO 16750-3 -  Road vehicles - Environmental conditions and - -
testing for electrical and electronic equipment - Part
3: Mechanical loads
ISO 16750-4 -  Road vehicles - Environmental conditions and - -
testing for electrical and electronic equipment - Part
4: Climatic loads
ISO/TR 8713 -  Electrically propelled road vehicles - Vocabulary - -


3

---------------------- Page: 5 ----------------------
SIST EN IEC 62660-2:2019

---------------------- Page: 6 ----------------------
SIST EN IEC 62660-2:2019
IEC 62660-2
®

Edition 2.0 2018-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Secondary lithium-ion cells for the propulsion of electric road vehicles –
Part 2: Reliability and abuse testing
Éléments d’accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques –
Partie 2: Essais de fiabilité et de traitement abusif
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.20; 43.120 ISBN 978-2-8322-6289-4
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 62660-2:2019
– 2 – IEC 62660-2:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test conditions . 8
4.1 General . 8
4.2 Measuring instruments . 8
4.2.1 Range of measuring devices . 8
4.2.2 Voltage measurement . 8
4.2.3 Current measurement . 8
4.2.4 Temperature measurements . 8
4.2.5 Other measurements . 9
4.3 Tolerance . 9
4.4 Thermal stabilization . 9
5 Electrical measurement . 9
5.1 General charge conditions . 9
5.2 Capacity . 10
5.3 SOC adjustment . 10
6 Reliability and abuse tests . 10
6.1 General . 10
6.2 Mechanical test . 11
6.2.1 Vibration . 11
6.2.2 Mechanical shock . 12
6.2.3 Crush . 13
6.3 Thermal test . 14
6.3.1 High temperature endurance. 14
6.3.2 Temperature cycling . 14
6.4 Electrical test . 15
6.4.1 External short circuit . 15
6.4.2 Overcharge . 16
6.4.3 Forced discharge . 16
7 Description of test results . 16
Annex A (informative) Selective test conditions . 18
Bibliography . 19

Figure 1 – Example of temperature measurement of cell . 9
Figure 2 – PSD of acceleration plotted against frequency . 11
Figure 3 – Examples of crush test . 13

Table 1 – Discharge conditions . 10
Table 2 – Values for PSD and frequency . 12
Table 3 – Mechanical shock test – parameters . 12
Table 4 – Temperatures and time duration for temperature cycling . 15
Table 5 – Test result description . 17
Table A.1 – Capacity test conditions . 18

---------------------- Page: 8 ----------------------
SIST EN IEC 62660-2:2019
IEC 62660-2:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SECONDARY LITHIUM-ION CELLS FOR
THE PROPULSION OF ELECTRIC ROAD VEHICLES –

Part 2: Reliability and abuse testing

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62660-2 has been prepared by IEC technical committee 21:
Secondary cells and batteries.
This second edition cancels and replaces the first edition published in 2010. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) The procedure of forced discharge test has been clarified (6.4.3.2).
b) "Cell block" has been added to the scope (Clause 1).
c) Option of temperature cycling test with electrical operation has been deleted (6.3.2).
d) The test conditions for overcharge test have been revised (6.4.2.2).

---------------------- Page: 9 ----------------------
SIST EN IEC 62660-2:2019
– 4 – IEC 62660-2:2018 © IEC 2018
The text of this International Standard is based on the following documents:
FDIS Report on voting
21/976/FDIS 21/986/RVD

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 62660 series, published under the general title Secondary
lithium-ion cells for the propulsion of electric road vehicles, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 10 ----------------------
SIST EN IEC 62660-2:2019
IEC 62660-2:2018 © IEC 2018 – 5 –
INTRODUCTION
The commercialization of electric road vehicles including battery, hybrid and plug-in hybrid
electric vehicles has been accelerated in the global market, responding to the global concerns
on CO reduction and energy security. This, in turn, has led to rapidly increasing demand for
2
high-power and high-energy-density traction batteries. Lithium-ion batteries are estimated to
be one of the most promising secondary batteries for the propulsion of electric vehicles. In the
light of the rapid spread of hybrid electric vehicles and the emergence of battery and plug-in
hybrid electric vehicles, a standard method for testing reliability and abuse requirements of
lithium-ion batteries is indispensable for securing a basic level of safety and obtaining
essential data for the design of vehicle systems and battery packs.
This document specifies reliability and abuse testing for automobile traction lithium-ion cells
that basically differ from the other cells including those for portable and stationary
applications specified by other IEC standards. For automobile application, it is important to
note the usage specificity; i.e. the design diversity of automobile battery packs and systems,
and specific requirements for cells and batteries corresponding to each of such designs.
Based on these facts, the purpose of this document is to provide a basic test methodology
with general versatility, which serves a function in common primary testing of lithium-ion cells
to be used in a variety of battery systems. This document does not provide any pass-fail
criteria for the tests, but specifies a standard classification of descriptions for test results.
1
This document is associated with ISO 12405-4 [1] .
IEC 62660-1 [2] specifies the performance testing of lithium-ion cells for electric vehicle
application.
IEC 62660-3 [3] specifies the safety requirements of lithium-ion cells for electric vehicle
application.

___________
1
 Numbers in square brackets refer to the Bibliography.

---------------------- Page: 11 ----------------------
SIST EN IEC 62660-2:2019
– 6 – IEC 62660-2:2018 © IEC 2018
SECONDARY LITHIUM-ION CELLS FOR
THE PROPULSION OF ELECTRIC ROAD VEHICLES –

Part 2: Reliability and abuse testing



1 Scope
This part of IEC 62660 specifies test procedures to observe the reliability and abuse
behaviour of secondary lithium-ion cells and cell blocks used for propulsion of electric
vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV).
NOTE 1 Secondary lithium-ion cells used for propulsion of plug-in hybrid electric vehicles (PHEV) can be tested
by the procedure either for BEV application or HEV application, according to the battery system design, based on
the agreement between the cell manufacturer and the customer.
This document specifies the standard test procedures and conditions for basic characteristics
of lithium-ion cells for use in propulsion of battery and hybrid electric vehicles. The tests are
indispensable for obtaining essential data on reliability and abuse behaviour of lithium-ion
cells for use in various designs of battery systems and battery packs.
This document provides standard classification of description of test results to be used for the
design of battery systems or battery pack
...

SLOVENSKI STANDARD
SIST EN 62660-2:2019
01-maj-2019
1DGRPHãþD
SIST EN 62660-2:2011
6HNXQGDUQLOLWLMLRQVNLþOHQL]DSRJRQHOHNWULþQLKFHVWQLKYR]LOGHO3UHVNXãDQMH
]DQHVOMLYRVWLLQL]UDEOMLYRVWL
Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability
and abuse testing
Lithium-Ionen-Sekundärzellen für den Antrieb von Elektrostraßenfahrzeugen - Teil 2:
Zuverlässigkeits- und Missbrauchsprüfung
Eléments d'accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques - Partie 2: Essais de fiabilité et de traitement abusif
Ta slovenski standard je istoveten z: EN IEC 62660-2:2019
ICS:
29.220.20 .LVOLQVNLVHNXQGDUQLþOHQLLQ Acid secondary cells and
EDWHULMH batteries
43.120 (OHNWULþQDFHVWQDYR]LOD Electric road vehicles
SIST EN 62660-2:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62660-2:2019

---------------------- Page: 2 ----------------------

SIST EN 62660-2:2019


EUROPEAN STANDARD EN IEC 62660-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2019
ICS 29.220.20; 43.120 Supersedes EN 62660-2:2011
English Version
Secondary lithium-ion cells for the propulsion of electric road
vehicles - Part 2: Reliability and abuse testing
(IEC 62660-2:2018)
Éléments d'accumulateurs lithium-ion pour la propulsion Sekundärbatterien für den Antrieb von
des véhicules routiers électriques - Partie 2: Essais de Elektrostraßenfahrzeugen - Teil 2: Zuverlässigkeits- und
fiabilité et de traitement abusif Missbrauchsprüfung von Lithium-Ionen-Zellen
(IEC 62660-2:2018) (IEC 62660-2:2018)
This European Standard was approved by CENELEC on 2019-01-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62660-2:2019 E

---------------------- Page: 3 ----------------------

SIST EN 62660-2:2019
EN IEC 62660-2:2019 (E)
European foreword
The text of document 21/976/FDIS, future edition 2 of IEC 62660-2, prepared by IEC/TC 21
"Secondary cells and batteries" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62660-2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-10-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-01-16
document have to be withdrawn

This document supersedes EN 62660-2:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62660-2:2018 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62660-1 NOTE Harmonized as EN 62660-1
NOTE Harmonized as EN 62660-3
IEC 62660-3
IEC 61434:1996 NOTE Harmonized as EN 61434:1996 (not modified)

2

---------------------- Page: 4 ----------------------

SIST EN 62660-2:2019
EN IEC 62660-2:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60068-2-64 -  Environmental testing - Part 2-64: Tests - Test Fh: EN 60068-2-64 -
Vibration, broadband random and guidance
ISO 16750-3 -  Road vehicles - Environmental conditions and - -
testing for electrical and electronic equipment - Part
3: Mechanical loads
ISO 16750-4 -  Road vehicles - Environmental conditions and - -
testing for electrical and electronic equipment - Part
4: Climatic loads
ISO/TR 8713 -  Electrically propelled road vehicles - Vocabulary - -


3

---------------------- Page: 5 ----------------------

SIST EN 62660-2:2019

---------------------- Page: 6 ----------------------

SIST EN 62660-2:2019
IEC 62660-2
®

Edition 2.0 2018-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Secondary lithium-ion cells for the propulsion of electric road vehicles –
Part 2: Reliability and abuse testing
Éléments d’accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques –
Partie 2: Essais de fiabilité et de traitement abusif
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.20; 43.120 ISBN 978-2-8322-6289-4
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62660-2:2019
– 2 – IEC 62660-2:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test conditions . 8
4.1 General . 8
4.2 Measuring instruments . 8
4.2.1 Range of measuring devices . 8
4.2.2 Voltage measurement . 8
4.2.3 Current measurement . 8
4.2.4 Temperature measurements . 8
4.2.5 Other measurements . 9
4.3 Tolerance . 9
4.4 Thermal stabilization . 9
5 Electrical measurement . 9
5.1 General charge conditions . 9
5.2 Capacity . 10
5.3 SOC adjustment . 10
6 Reliability and abuse tests . 10
6.1 General . 10
6.2 Mechanical test . 11
6.2.1 Vibration . 11
6.2.2 Mechanical shock . 12
6.2.3 Crush . 13
6.3 Thermal test . 14
6.3.1 High temperature endurance. 14
6.3.2 Temperature cycling . 14
6.4 Electrical test . 15
6.4.1 External short circuit . 15
6.4.2 Overcharge . 16
6.4.3 Forced discharge . 16
7 Description of test results . 16
Annex A (informative) Selective test conditions . 18
Bibliography . 19

Figure 1 – Example of temperature measurement of cell . 9
Figure 2 – PSD of acceleration plotted against frequency . 11
Figure 3 – Examples of crush test . 13

Table 1 – Discharge conditions . 10
Table 2 – Values for PSD and frequency . 12
Table 3 – Mechanical shock test – parameters . 12
Table 4 – Temperatures and time duration for temperature cycling . 15
Table 5 – Test result description . 17
Table A.1 – Capacity test conditions . 18

---------------------- Page: 8 ----------------------

SIST EN 62660-2:2019
IEC 62660-2:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SECONDARY LITHIUM-ION CELLS FOR
THE PROPULSION OF ELECTRIC ROAD VEHICLES –

Part 2: Reliability and abuse testing

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62660-2 has been prepared by IEC technical committee 21:
Secondary cells and batteries.
This second edition cancels and replaces the first edition published in 2010. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) The procedure of forced discharge test has been clarified (6.4.3.2).
b) "Cell block" has been added to the scope (Clause 1).
c) Option of temperature cycling test with electrical operation has been deleted (6.3.2).
d) The test conditions for overcharge test have been revised (6.4.2.2).

---------------------- Page: 9 ----------------------

SIST EN 62660-2:2019
– 4 – IEC 62660-2:2018 © IEC 2018
The text of this International Standard is based on the following documents:
FDIS Report on voting
21/976/FDIS 21/986/RVD

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 62660 series, published under the general title Secondary
lithium-ion cells for the propulsion of electric road vehicles, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 10 ----------------------

SIST EN 62660-2:2019
IEC 62660-2:2018 © IEC 2018 – 5 –
INTRODUCTION
The commercialization of electric road vehicles including battery, hybrid and plug-in hybrid
electric vehicles has been accelerated in the global market, responding to the global concerns
on CO reduction and energy security. This, in turn, has led to rapidly increasing demand for
2
high-power and high-energy-density traction batteries. Lithium-ion batteries are estimated to
be one of the most promising secondary batteries for the propulsion of electric vehicles. In the
light of the rapid spread of hybrid electric vehicles and the emergence of battery and plug-in
hybrid electric vehicles, a standard method for testing reliability and abuse requirements of
lithium-ion batteries is indispensable for securing a basic level of safety and obtaining
essential data for the design of vehicle systems and battery packs.
This document specifies reliability and abuse testing for automobile traction lithium-ion cells
that basically differ from the other cells including those for portable and stationary
applications specified by other IEC standards. For automobile application, it is important to
note the usage specificity; i.e. the design diversity of automobile battery packs and systems,
and specific requirements for cells and batteries corresponding to each of such designs.
Based on these facts, the purpose of this document is to provide a basic test methodology
with general versatility, which serves a function in common primary testing of lithium-ion cells
to be used in a variety of battery systems. This document does not provide any pass-fail
criteria for the tests, but specifies a standard classification of descriptions for test results.
1
This document is associated with ISO 12405-4 [1] .
IEC 62660-1 [2] specifies the performance testing of lithium-ion cells for electric vehicle
application.
IEC 62660-3 [3] specifies the safety requirements of lithium-ion cells for electric vehicle
application.

___________
1
 Numbers in square brackets refer to the Bibliography.

---------------------- Page: 11 ----------------------

SIST EN 62660-2:2019
– 6 – IEC 62660-2:2018 © IEC 2018
SECONDARY LITHIUM-ION CELLS FOR
THE PROPULSION OF ELECTRIC ROAD VEHICLES –

Part 2: Reliability and abuse testing



1 Scope
This part of IEC 62660 specifies test procedures to observe the reliability and abuse
behaviour of secondary lithium-ion cells and cell blocks used for propulsion of electric
vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV).
NOTE 1 Secondary lithium-ion cells used for propulsion of plug-in hybrid electric vehicles (PHEV) can be tested
by the procedure either for BEV application or HEV application, according to the battery system design, based on
the agreement between the cell manufacturer and the customer.
This document specifies the standard test procedures and conditions for basic characteristics
of lithium-ion cells for use in propulsion of battery and hybrid electric vehicles. The tests are
indispensable for obtaining essential data on reliability and abuse behaviour of lithium-ion
cells for use in various designs of battery systems and battery packs.
This document provides standard classification of description of test results to be used for the
design of battery systems or battery packs.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.