Lawful Interception (LI) - Handover Interface and Service-Specific Details (SSD) for IP delivery - Part 3: Service-specific details for internet access services

The present document contains a stage 1 description of the interception information in relation to the process of binding
a "target identity" to an IP address when providing Internet access and a stage 2 description of when Intercept Related
Information (IRI) and Content of Communication (CC) need to be sent, and what information it needs to contain.
The present document includes but is not restricted to IRI based on application of Dynamic Host Configuration Protocol
(DHCP) and Remote Authentication Dial-In User Service (RADIUS) technology for binding a "target identity" to an IP
address and CC for the intercepted IP packets.
The definition of the Handover Interface 2 (HI2) and Handover Interface 3 (HI3) is outside the scope of the present
document. For the handover interface is referred to ETSI TS 102 232-1 [2]

Zakonito prestrezanje (LI) - Izročilni vmesnik in storitveno specifične podrobnosti (SSD) za IP-dostavo vsebin - 3. del: Storitveno specifične podrobnosti za storitve internetnega dostopa

Ta dokument vsebuje opis 1. stopnje za informacije o prestrezanju v zvezi s postopkom povezave »ciljne identitete« z naslovom IP pri zagotavljanju internetnega dostopa in opis 2. stopnje o tem, kdaj je treba poslati podatke o prestreženi komunikaciji (IRI) ali vsebino komunikacije (CC) in katere informacije morajo biti vključene.
Ta dokument med drugim vključuje podatke o prestreženi komunikaciji, ki temeljijo na uporabi tehnologije omrežnega protokola za dinamično nastavitev gostitelja (DHCP) in protokola, ki omogoča centralno preverjanje avtentičnosti oddaljenega uporabnika (RADIUS) za povezovanje »ciljne identitete« z naslovom IP in vsebino komunikacije s prestreženimi paketi IP.
Opredelitev izročilnega vmesnika 2 (HI2) in izročilnega vmesnika 3 (HI3) ne spada na področje uporabe tega dokumenta. Izročilni vmesnik je omenjen v standardu ETSI TS 102 232-1 [2].

General Information

Status
Published
Publication Date
03-Sep-2023
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Aug-2023
Due Date
29-Oct-2023
Completion Date
04-Sep-2023

Buy Standard

Standard
ETSI TS 102 232-3 V3.12.1 (2023-08) - Lawful Interception (LI); Handover Interface and Service-Specific Details (SSD) for IP delivery; Part 3: Service-specific details for internet access services
English language
58 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
TS ETSI/TS 102 232-3 V3.12.1:2023
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

ETSI TS 102 232-3 V3.12.1 (2023-08)






TECHNICAL SPECIFICATION
Lawful Interception (LI);
Handover Interface and
Service-Specific Details (SSD) for IP delivery;
Part 3: Service-specific details for internet access services



---------------------- Page: 1 ----------------------
2 ETSI TS 102 232-3 V3.12.1 (2023-08)

Reference
RTS/LI-00242-3
Keywords
access, internet, IP, lawful interception, security,
service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
n or warranty is made of merchantability or fitness
and/or governmental rule and/or regulation and further, no representatio
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2023.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 232-3 V3.12.1 (2023-08)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative refe
...

SLOVENSKI STANDARD
SIST-TS ETSI/TS 102 232-3 V3.12.1:2023
01-oktober-2023
Zakonito prestrezanje (LI) - Izročilni vmesnik in storitveno specifične podrobnosti
(SSD) za IP-dostavo vsebin - 3. del: Storitveno specifične podrobnosti za storitve
internetnega dostopa
Lawful Interception (LI) - Handover Interface and Service-Specific Details (SSD) for IP
delivery - Part 3: Service-specific details for internet access services
Ta slovenski standard je istoveten z: ETSI TS 102 232-3 V3.12.1 (2023-08)
ICS:
35.240.95 Spletne uporabniške rešitve Internet applications
SIST-TS ETSI/TS 102 232-3 V3.12.1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS ETSI/TS 102 232-3 V3.12.1:2023

---------------------- Page: 2 ----------------------
SIST-TS ETSI/TS 102 232-3 V3.12.1:2023
ETSI TS 102 232-3 V3.12.1 (2023-08)






TECHNICAL SPECIFICATION
Lawful Interception (LI);
Handover Interface and
Service-Specific Details (SSD) for IP delivery;
Part 3: Service-specific details for internet access services



---------------------- Page: 3 ----------------------
SIST-TS ETSI/TS 102 232-3 V3.12.1:2023
 2 ETSI TS 102 232-3 V3.12.1 (2023-08)

Reference
RTS/LI-00242-3
Keywords
access, internet, IP, lawful interception, security,
service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
n or warranty is made of merchantability or fitness
and/or governmental rule and/or regulation and further, no representatio
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2023.
All rights reserved.

ETSI

---------------------- Page: 4 ----------------------
SIST-TS ETSI/TS 102 232-3 V3.12.1:2023
 3 ETSI TS 102 232-3 V3.12.1 (2023-08)
Contents
Intellectual Property Rights . 6
Foreword .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.