Railway applications - Wheel/Rail friction management - Part 1-2: Equipment and Application - Top of Rail materials

This European standard specifies the requirements when applying material to the active interface between the wheel tread and the crown of the rail and includes trainborne and track side equipment.
This technical specification only covers the equipment and application of material to the active interface.
This document defines:
- the characteristics that systems of top of rail equipment for wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verification;
- all relevant terminology which is specific to the application of top of rail materials of the wheel-rail interface.
This document only applies to the mainline railway
NOTE   This document can also be used for other railways, e. g urban rail’

Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 1-2: Vorrichtungen und Anwendung - Behandlung der Schienenoberfläche

Dieses Dokument beschränkt sich darauf, die Anforderungen beim Auftragen von Material auf die aktive Kontaktfläche zwischen Radlauffläche und Fahrfläche der Schiene festzulegen, und umfasst fahrzeugseitige und gleisseitige Vorrichtungen.
Dieses Dokument deckt nur die Vorrichtungen und Anwendung von Materialien auf der aktiven Kontaktfläche ab.
Dieses Dokument definiert
- die Eigenschaften, die Ausrüstungssysteme für Fahrflächenbehandlung für die Kontaktfläche zwischen Rad und Schiene erfüllen müssen, zusammen mit geeigneten Inspektions- und Prüfverfahren, die zur Verifikation durchzuführen sind,
- alle relevanten Begriffe, die spezifisch für die Anwendung von Kraftschlussmodifikatoren auf die Kontaktfläche zwischen Rad und Schiene sind.
Dieses Dokument ist nur für Vollbahnen anzuwenden.
ANMERKUNG Dieses Dokument kann auch für andere Schienennetze verwendet werden, z. B. städtische Schienenbahnen.

Applications ferroviaries - Gestion de la friction roue/rail - Partie 1-2 : Équipements et application - Matériaux de la surface du rail

Železniške naprave - Trenje na stiku kolo-tirnica - 1-2. del: Oprema in uporaba - Materiali za zgornjo površino tirnic

General Information

Status
Withdrawn
Public Enquiry End Date
21-Oct-2020
Publication Date
31-Jan-2021
Withdrawal Date
05-Nov-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Nov-2023
Due Date
29-Nov-2023
Completion Date
06-Nov-2023

Relations

Buy Standard

Technical specification
TS CEN/TS 15427-1-2:2021
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTS FprCEN/TS 15427-1-2:2020
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15427-1-2:2021
01-marec-2021
Železniške naprave - Trenje na stiku kolo-tirnica - 1-2. del: Oprema in uporaba -
Materiali za zgornjo površino tirnic
Railway applications - Wheel/Rail friction management - Part 1-2: Equipment and
Application - Top of Rail materials
Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 1-2:
Vorrichtungen und Anwendung - Behandlung der Schienenoberfläche
Applications ferroviaries - Gestion de la friction roue/rail - Partie 1-2 : Équipements et
application - Matériaux de la surface du rail
Ta slovenski standard je istoveten z: CEN/TS 15427-1-2:2021
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
45.080 Tračnice in železniški deli Rails and railway
components
SIST-TS CEN/TS 15427-1-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15427-1-2:2021

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15427-1-2:2021


CEN/TS 15427-1-2
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

January 2021
TECHNISCHE SPEZIFIKATION
ICS 21.260; 45.080; 45.120
English Version

Railway applications - Wheel/Rail friction management -
Part 1-2: Equipment and Application - Top of Rail
materials
Applications ferroviaries - Gestion de la friction Bahnanwendungen - Reibungsmanagement zwischen
roue/rail - Partie 1-2 : Équipements et application - Rad und Schiene - Teil 1-2: Vorrichtungen und
Matériaux de la surface du rail Anwendung - Behandlung der Schienenoberfläche
This Technical Specification (CEN/TS) was approved by CEN on 23 November 2020 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15427-1-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15427-1-2:2021
CEN/TS 15427-1-2:2021
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General. 7
4.1 Purpose . 7
4.2 Application . 8
5 Requirements for trainborne equipment . 8
5.1 General. 8
5.2 Design of trainborne equipment . 9
5.3 Installation of trainborne equipment .
...

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 15427-1-2:2020
01-oktober-2020
Železniške naprave - Trenje na stiku kolo-tirnica - 1-2. del: Oprema in uporaba -
Materiali za zgornjo površino tirnic
Railway applications - Wheel/Rail friction management - Part 1-2: Equipment and
Application - Top of Rail materials
Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 1-2:
Vorrichtungen und Anwendung - Behandlung der Schienenoberfläche
Applications ferroviaries - Gestion de la friction roue/rail - Partie 1-2 : Équipements et
application - Matériaux de la surface du rail
Ta slovenski standard je istoveten z: FprCEN/TS 15427-1-2
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
45.080 Tračnice in železniški deli Rails and railway
components
kSIST-TS FprCEN/TS 15427-1-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 15427-1-2:2020

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 15427-1-2:2020


FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 15427-1-2
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

July 2020
ICS 21.260; 45.080; 45.120
English Version

Railway applications - Wheel/Rail friction management -
Part 1-2: Equipment and Application - Top of Rail
materials
Applications ferroviaries - Gestion de la friction Bahnanwendungen - Reibungsmanagement zwischen
roue/rail - Partie 1-2 : Équipements et application - Rad und Schiene - Teil 1-2: Vorrichtungen und
Matériaux de la surface du rail Anwendung - Behandlung der Schienenoberfläche


This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 256.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 15427-1-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 15427-1-2:2020
FprCEN/TS 15427-1-2:2020
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General. 8
4.1 Purpose . 8
4.2 Application . 8
5 Requirements for trainborne equipment . 8
5.1 General. 8
5.2 Design of trainborne equipment . 9
5.3 Installation of trainborne equipment . 10
5.4 Operations, Inspection and maintenance .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.